Kenmore 7290, 7271, 7250, 7280 manual Problem Solution

Page 27

Before You Call • Solutions to common problems

Before you call for service, review the following list. It may save you time & expense. Possible solutions to these problems are provided with the problem listed:

Problem	Solution

Poor baking results.	• Many factors affect baking results. Make sure the proper oven rack position
	is used. Center food in the oven and space pans to allow air to circulate.
	Allow the oven to preheat to the set temperature before placing food in the
	oven. Try adjusting the recipe's recommended temperature or baking time. If
	you feel the oven is too hot or cool, see Adjusting oven temperature in
	Setting Oven Controls section.

Appliance is not level.	• Be sure floor is level, strong & stable enough to adequately support range.
	• If floor is sagging or sloping, contact a carpenter to correct the situation.
	• Poor installation. Place oven rack in center of oven. Place a level on the oven
	rack. Adjust leveling legs at base of appliance until the rack is level.
	• Kitchen cabinet alignment may make range appear not level. Be sure
	cabinets are square & have sufficient room for appliance clearance.

Cannot move appliance easily.	• Cabinets not square or are built in too tightly. Contact builder or installer to
Appliance must be accessible for	make appliance accessible.
service.	• Carpet interferes with appliance. Provide sufficient space so appliance can

	be lifted over carpet.
	• Gas line is hard-plumbed. Have a flexible CSA International approved
	metal appliance connector installed.

Oven portion of appliance does not	• Be sure regulator gas valve is turned to ON. See installation instructions.
operate.	• The time of day is not set. The time of day must first be set in order to

	operate the oven. See Setting clock in Setting Oven Controls section.
	• Be sure the oven controls are set properly for the desired function. See
	Setting Oven Controls section and review instructions for the desired cooking
	function in this manual or see “Entire appliance does not operate” in this
	checklist.

Entire appliance does not operate.	• Make sure power cord is plugged properly into outlet.
	• Electrical power outage. Check house lights to be sure. Call your local
	electric company for service outage information.
	• Service wiring is not complete. Call 1-800-4-MY-HOME® for assistance (See
	back cover).

Oven control beeps and displays F code error.

•Oven control has detected a fault or error condition. Press key pad to clear the error code. Try Bake or Broil function. If the F code error repeats, remove power from appliance, wait 5 minutes and then repower appliance and set clock with the correct time of day. Try Bake or Broil function again.

If the fault recurs, press to clear and call 1-800-4-MY-HOME® for assistance (See back cover).

27

Image 27

Contents Use & Care Guide Guía de uso y cuidada KenmoreKenmore Limited Warranty Table of ContentsRead all instructions before using this appliance Tip Over HazardSave these instructions for future reference Important Instructions for Using Your Oven Important safety notice Important Instructions for Using Your CooktopConversion to L.P. Gas Product RecordSerial Plate Location Grounding InstructionsAir circulation in the oven Before Setting Oven ControlsOven vent location Types of oven racksBurner head Before Setting Surface ControlsInstalling burner grates RememberFlame size Type of cooking Using proper cookwareSetting proper burner flame size Cookware material typesSetting Surface Controls Setting surface burnersHome canning Oven Control Functions Setting Oven ControlsSetting Clock Setting silent or audible control modeSetting Timer Changing temperature display F or COven Lockout Setting BakeSetting Cook Time When the cook time runs outUntil is pressed Operating oven light Setting Delay StartBaking Benefits of convection cookingHow convection works To set Convection on some modelsSuggested broil settings table gas oven BroilTo set Broil Warm & Hold Adjusting Oven TemperatureTo add Warm & Hold when baking with Cook Time To adjust oven temperatureWarmer drawer recommended settings Warmer drawer recommended food settings Food Item SettingStorage in or on appliance-flammable To set warmer drawer Warmer drawer indicator lightSetting warmer drawer Flex Clean can not be set when the warmer drawer is activeTo set Select Clean to start immediately Select CleanRead before starting Select Clean Setting Select CleanDelayed Start Select Clean When Select Clean is finishedTo start a Delay Start Select Clean Cleaning recommendation table Care & CleaningCleaning surface burner heads Cleaning recessed and contoured areas of cooktopCleaning surface burner grates Cleaning burner capsGlass WireAluminum foil and utensils Replacing oven light some modelsTo replace oven door Removing and replacing the lift-off oven doorSpecial door care instructions To remove oven doorProblem Solution Searing Be sure oven door closed when broilingRunning Select Clean cycle SectionSurface burners do not ignite Surface burners in the Care & Cleaning sectionCooktop and surface burners in the Care & Cleaning section Unavoidable due to salt content in airProtection Agreements Acuerodes de protección