Kenmore 790.9280 Removing and replacing the lift-off oven door, Special door care instructions

Page 35

Care & Cleaning

Removing and replacing the lift-off oven door

To avoid possible injury when removing or replacing the oven door, follow the instructions below carefully and always hold the oven door with both hands positioned away from the door hinge area.

The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.

To remove oven door:

1.Open oven door completely (horizontal with floor - Fig.l).

2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (Fig. 2). A tool such as a small fiat-blade screwdriver may be required.

3.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - Fig. 3).

4.Close the door to the broil stop position (the oven door will stop into this position just before fully closing).

5.With the oven door in the broil stop position, lift the oven door hinge arms over the roller pins located on each side of the oven frame (Fig. 4).

To replace oven door:

1.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - Fig. 3).

2.Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (Fig. 4). The hook of the hinge arms must be fully seated onto the roller pins.

3.Fully open the oven door (horizontal with floor - Fig. 1).

4.Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges (Fig. 2) to the locked position; then close the oven door.

Special door care instructions

Most oven doors contain glass thai can break. Read the following recommendations:

°Do not close the oven door until aft the oven racks are fully in

place inside the oven cavity.

°Do not hit the glass with pots, pans, or any other object.

°Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

Oven door

hinge

locations

Fig. 1

Fig. 2

J///

 

//

///

oven

/

//'

door

 

 

Fig. 3

roller

pln

hinge

arm

hook

Fig. 4

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Ien Contents Save these instructions for future reference Read all instructions before using this applianceInstall anti=tlp device packed with range DefinitionsResult in injury Important Safety Notice Important Instructions for Using Your OvenINSTRUCTiONS for Ceramic Important Safety InstructionsIMPORTANT iNSTRUCTiONS for Using Your IMPORTANT iNSTRUCTiONS for Self IMPORTANT iNSTRUCTiONS for CleaningSerial Plate Location Product RecordAir circulation in the oven Before Setting Oven ControlsRemoving, replacing and arranging racks Types of oven racksUsing proper cookware Before Setting Surface ControAbout the radiant surface elements Before Setting Surface ControlsElement On & Hot Surface indicator lights About the ceramic glass cooktopTypes of cooktop surface elements Turbo Boil feature some modelsHome Canning Single radiant surface elements all models Setting Surface ControlsRadiant surface element settings Dual radiant surface element some models Setting Surface ControPush in and turn the surface control knob clockwise to Triple radiant surface element some modelsWclrm & Recldy TM Zone some models Setting wormer zone controlOven control keypads Oven Control FunctionsAdd I Minute Setting Oven ControlsSetting Clock Hour Energy Saving featureTo activate the oven lockout feature Changing oven temperature displaySetting Oven Lockout Setting silent or audible control mode350F Setting Preheat350F Setting Delay Start Setting Cook TimeSuggestions for Convection baking Cony Bake some models Convection Bake some modelsSuggestions for Cony Roast Cony Roast some modelsConv Convert some models Suggested BroilExample to set Slow Cook Setting Oven Controls Slow CookUsing AirGuard TM feature Recipe Recall Warm & Hold TMImportant note Adjusting Oven TemperatureRecipe Recall contd Operating oven lightInstructions Sabbath Feature for use on the Jewish Sabbath & HolidaysOff Feature activeWarmer drawer recommended Setting Warmer Drawer ControlWarmer drawer recommended settings Arranging warmer drawer rack positionsTo set warmer drawer Warmer drawer Indicator LightSetting warmer drawer Indicator lightExample to set Flex Clean to start immediately Flex CleanRead before starting Flex Clean Setting Flex CleanIf it becomes necessary to stop Flex Clean when active Delayed Start Flex CleanWhen Flex Clean is finished Cleaning recommendation table Care & CleaningFor light to moderate soil Cooktop maintenanceCooktop cleaning Do notReplacing oven light General cleaningAluminum foil and utensils Special door care instructions Removing and replacing the lift-off oven doorBefore You Call Sobfions To common problemsProblem SolutionProblemSolution Before You Call Solutions to common problemsBefore You Call Solutions to common problems Protection Agreements Call anytime, day or night U.S.A. and Canada Sears Parts&RepairServiceCenter

790.9280, 790.9270, 790.9290 specifications

The Kenmore 790 series, encompassing models 790.9290, 790.9270, and 790.9280, represents a pinnacle of innovation in kitchen appliances, specifically designed for the modern home chef. Each model boasts a plethora of features that cater to both novice cooks and seasoned culinary experts alike, ensuring a versatile cooking experience.

One of the standout characteristics of these Kenmore models is their advanced cooking technology. Each stove in the series is equipped with precise temperature controls that allow users to achieve consistent cooking results, eliminating the guesswork often associated with traditional cooking methods. The models also feature an intuitive digital display that streamlines both settings adjustment and monitoring cooking progress.

The Kenmore 790.9290, 790.9270, and 790.9280 are designed with powerful heating elements. Each model offers a combination of gas and electric cooking options, allowing users to choose their preferred cooking method. The electric burners heat up quickly and evenly, while the gas burners offer instant flame adjustments for precision cooking. This flexibility ensures that users can tackle a variety of recipes with ease.

Another prominent feature across the Kenmore 790 series is the spacious oven design. Each model includes multiple racks and a sizable cooking chamber, enabling users to cook multiple dishes simultaneously. The ovens are also equipped with various cooking modes, including bake, broil, and convection options, which enhance cooking efficiency and flavor.

Safety is paramount in the design of these appliances. The Kenmore 790 models come with features such as flame failure safety devices that automatically shut off the gas if the flame goes out, as well as child lock controls, ensuring peace of mind for families. Additionally, the ovens are designed to include auto shut-off timers, preventing overcooking incidents.

Cleaning convenience is yet another highlight of the Kenmore 790 series. These models incorporate self-cleaning capabilities, making maintenance simple and hassle-free. The smooth surface design also allows for easy wipe-downs, thus prolonging the appliance's aesthetic appeal.

In summary, the Kenmore 790.9290, 790.9270, and 790.9280 models are characterized by their powerful heating elements, advanced cooking technology, spacious ovens, safety features, and ease of cleaning. These appliances not only enhance cooking performance but also reflect the innovation and quality that Kenmore is known for in the realm of kitchen appliances. Whether it's a home-cooked meal for family or an elaborate dinner party, these stoves provide the functionality and reliability needed in any culinary endeavor.
Top Page Image Contents