Kenmore 911.46565 Removable Parts, Switch Inthe Off Position Donot, To Remove the Cover

CARE AND CLEANING

Removable Parts

CLEANING MATERIALS

- Dishwashing detergent

•Warm water * Soft cloth

Molded Rib

Groove "

Stem

Clear i_

Spring Clip

TOrREMOVE

1.Be sure the control knob is in the off position.

2.Pull straight off the stem.

Using a piece of string can make

removing the knob easier. Slip the

string under andaround the knob, pulling straight out.

TO CLEAN

Wash the knobthoroughly with soapy

water. Dry completely with a soft cloth.

DO NOT let the knob soak

TO REPLACE

1.Check the back of the knob. The

molded rib of the knob is designed

to fit perfectly onto the knob stem.

2, Align the molded rib to the clear groove in the knob stem.

3.Push the knob back as far as it wilt go.

rII II II I IIilllllll i

		switch		is	inthe		off
		position.			Donot
Waituntil		the		bulb	has
cooled		and	use	a	dry	cloth.
Never	touch		the live			collar	of
the	bulb.	If	you	are	replacing
a broken		light		bulb	make
_sure	the	power		supply		is	off.

J

Live

Bulb

TO REMOVE THE COVER

1.Disconnect electrical power to the oven at the main circuit breaker or fuse box.

2.Grasp the glass cover and turn 1/4

turn counterclockwise until the tabs of the glass cover clear the grooves of the glass retainer,

REPLACE THE LIGHT BULB

Unscrew the !ight bulb and replace it

with a 40-watt home appliance bulb.

TO REPLACE COVER

1.Place the tabs of the glass cover

into the grooves of the glass retainer.

2.Turn the glass cover 1/4 turn in the

clockwise direction.

3.Reconnect the electrical power to the oven.

For improved lighting inside the oven, clean the glass cover frequently using

a wet cloth. Caution= This should

only be done when the oven is

completely cool.

22