Murray 465600x8A manual HOW to Remove the Mower Housing, HOW to Install the Mower Housing

Page 28

MAINTENANCE

HOW TO REMOVE THE MOWER HOUSING

1.Move the blade rotation control to the DISENGAGE position.

2.Move the lift lever to the level adjustment position (Figure 25).

HOW TO INSTALL THE MOWER HOUSING

1.

Push the mower housing under the right side of the unit.

2.

Put the mower drive belt around the stack pulley. Make sure

WARNING: The lift lever is spring loaded. Make sure the lift lever is locked in the LEVEL ADJUST- MENT position.

3.Remove the hair pins and the washers from the suspension arms (Figure 26). See illustra- tions “C” and “D”.

4.Remove the hair pins and wash- ers from the lift links. See il- lustrations “A” and “B”.

Level Adjustment

 

Position

Figure 25

 

the “V” side of the mower drive belt is against the stack pulley.

 

Also, make sure the mower drive belt is not twisted.

3.

Attach the front hanger to the axle support with the hanger

 

rod. Fasten with the fasteners as shown. See illustration “F”.

4.

Make sure the mower drive belt is between the stack pulley

 

and the two belt guides. See illustration “G”.

5.

Attach the lift links to the lifter assembly. Fasten with the

 

washers and hair pins. See illustrations “A” and “B”.

6.

Attach the right and the left suspension arms to the suspen-

 

sion brackets. Fasten with the washers and hair pins. See il-

 

lustrations “C” and “D”.

5.Disconnect the extension spring from the blade control rod. See illustration “E”.

6.Disconnect the front hanger from the axle support. See illustration “F”.

7.Remove the mower drive belt from the stack pulley.

8.Pull the mower housing away from the right side of the unit.

9.To operate without the mower housing, move the lift lever to the TOP position.

7.

Attach the extension spring to the blade control rod. See

 

illustration “E”.

8.

Move the blade rotation control to the ENGAGE position.

 

Make sure the mower drive belt is inside all the belt guides.

9.

Make sure the mower housing is level. See the instructions on

 

“How To Level The Mower Housing”.

10.

Check the operation of the blade rotation control. See the in-

 

structions on “How To Adjust The Blade Rotation Control”.

A

Lift Lever

 

Stack Pulley

 

Lift Link

Lifter

 

 

Assembly

 

B

Belt

Belt

 

 

Guide

Blade Rotation

Guide

 

Control

Mower Drive Belt

 

 

 

Suspension

A

 

Arm

 

 

A

B

 

 

 

 

B

Lift Link

Extension

 

Spring

Blade

 

 

 

Control Rod

Suspension Arm

 

 

 

Hanger Rod

 

A

 

 

B

 

 

 

Front Hanger

 

 

Mower Drive Belt

Figure 26

F-030727L

28

 

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Model Table of Contents Environmental Awareness OWNER’S InformationSafe Operation Practices for Ride-on Mowers II. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Steps to Follow Before MowingSafety Warning Pictorials International PictorialsInternational Pictorials Control And Operating PictorialsAssembly AssemblyHOW to Install the Seat HOW to Assemble the Steering Wheel100105417x47 25x3 17x146Maintenance Free Battery HOW to Charge Maintenance Free BatteryHOW to Install the Battery Cables Remove the battery and battery trayHOW to Prepare the Engine Check the Level of the Mower HousingIMPORTANT! Before YOU Start Mowing Check the TiresOperation Location of ControlsHOW to USE the Throttle Control AttachmentsHOW to USE the Speed Control Pedal HOW to Disconnect the TransmissionTo 1/2 To 2/3HOW to SET the Parking Brake HOW to Change the Cutting HeightHOW to Stop the Unit HOW to Transport the UnitHOW to Operate with the Mower Housing HOW to Operate the Unit on HillsBefore Starting the Engine HOW to Start the EngineCarburetor Operating Tips Mowing and Bagging TipsHOW to Change the Mulcher Plate How To Remove The Mulcher PlateMaintenance Frequency Maintenance Required CommentsHOW to Check the Muffler General RecommendationsHOW to Remove and Install the Blade HOW to Sharpen the BladeInspect Blade Mount the blade and blade adapter on the mandrelHOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Motion Drive Belt Remove the 1/4 inch 6 mm pin or bolt FigureHOW to Check and Adjust the Drive Brake Disconnect the red cable from the positive + terminalWhere to Lubricate HOW to Check the Fuel FilterHOW to Remove the Mower Housing HOW to Install the Mower HousingRemove the mower drive belt from the stack pulley Attach the extension spring to the blade control rod. SeeLift Lever Hole No Position No HOW to Adjust the Gauge Wheels5,6 HOW to Level the Mower Housing Install the mid-idler pulley HOW to Replace the Motion Drive BeltRemove the mid-idler pulley HOW to Replace the Primary Mower Drive Belt HOW to Replace the Secondary Mower Drive BeltAssemble the left pulley cover Remove the primary mower drive belt from the stack pulleyHOW to Install the Wheels Fasten the rear wheel with washer and e-ringHOW to Replace the Fuse HOW to Replace the Light BulbHOW to Clean the Mower Housing BatteryTrouble Shooting Chart MURRAY, INC. Lawn Mower Central Parts Distributors 030727L030727L Repair Parts Chassis & HoodKey Description Drive Assembly Drive Assembly Steering Repair Parts Mower Housing Suspension Repair Parts Mower Housing 7601031 Engine Mount Assembly Repair Parts Repair Parts Electrical System Electrical System Key Part Description030727L 030727L 030727L Index Model No Model No Bushel Capacity

465600x8A specifications

The Murray 465600x8A is a remarkable innovation in the realm of industrial machinery, specifically designed to meet the demanding needs of various sectors. This versatile equipment stands out for its impressive performance and advanced technologies, making it a favorable choice for businesses striving for efficiency and reliability.

One of the most significant features of the Murray 465600x8A is its robust construction. Built with high-grade materials, this machine ensures durability and longevity, even in the most challenging environments. The rugged design allows it to withstand heavy usage, making it ideal for industrial applications where downtime is not an option.

Equipped with a powerful engine, the Murray 465600x8A delivers exceptional performance. Its engine is designed for high torque, providing the necessary power to tackle demanding tasks with ease. The machine operates smoothly under various conditions, ensuring that productivity is maintained without interruption.

The Murray 465600x8A also embraces cutting-edge technology, featuring an advanced control system that enhances user experience and operational efficiency. This system allows for precise adjustments and real-time monitoring, enabling operators to optimize performance and reduce waste. This technology not only elevates productivity but also contributes to greater energy efficiency, leading to cost savings over time.

In terms of safety features, the Murray 465600x8A is designed with user protection in mind. It comes with an array of safety mechanisms, including emergency stop functions and protective guards, ensuring that operators can work with peace of mind. The intuitive design of the controls also minimizes the learning curve for new users, promoting a safe working environment.

Another notable characteristic of the Murray 465600x8A is its flexibility. The machine can be easily integrated into various operational setups, allowing it to adapt to different workflows. This adaptability makes it a valuable asset for companies looking to enhance their operational capabilities.

Overall, the Murray 465600x8A is an exemplary model of industrial machinery that embodies strength, efficiency, and safety. Its advanced features and robust performance make it a top choice for industries such as construction, manufacturing, and logistics, where reliability and productivity are of utmost importance. As businesses continue to seek ways to improve operations, the Murray 465600x8A stands out as a trustworthy partner in achieving these objectives.
Top Page Image Contents