3.ATTACH MOWER SIDE SUSPEN- SION ARMS (A) TO CHASSIS - Posi-
tion hole in arm over pin (B) on outside of tractor chassis and secure with
retainer spring.
4.Repeat on opposite side of tractor.
6.ATTACH FRONT LINK (E) - Work from left side of tractor. Insert rod end of link
assembly through front hole in tractor
front suspension bracket (F).
7.Insert end of link (E) into hole in front mower bracket (H) and secure with washer and retainer spring (J).
. ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin (D) on rear mower bracket and secure with washer and retainer spring.
8.Hook end of clutch cable spring (Q) into hole in idler arm (R).
9.Push clutch cable housing guide (P) into bracket, slide collar (L) onto guide and secure with retainer spring (K).
10.Install belt onto engine pulley (M) and belt keepers (G).
IMPORTANT: Check belt for proper rout- ing in all mower pulley grooves.
11.Raise attachment lift lever to highest position.
12.If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.
03042tex
21