Craftsman 917.273648 Engine OIL Filter, AIR Filter, Engine Cooling System, Muffler, Spark Plugs

Page 21

ENGINE OIL FILTER

Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year.

AIR FILTER

Your engine will not run properly using a dirty air filter. Replace pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every

100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

1.Pull up on air filter cover handle and rotate towards engine.

2.Remove cover.

3.Carefully remove air filter cartridge and pre-cleaner from base.

4.Clean base carefully to prevent debris

from falling into carburetor.

NOTE: If very dirty or damaged, replace cartridge.

5.Place new pre-cleaner and cartridge firmly in base.

6.Align tabs on cover with slots in blower housing and replace cover.

7.Hook handle on cover and push down on handle to close.

IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean cartridge.

Cover

ge

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from

overheating. Clean with a wire brush or compressed air to remove dirt and stub- born dried gum fibers.

ENGINE COOLING SYSTEM

Debris may clog the engine's air cool- ing system. Remove blower housing and clean area shown to prevent overheating and engine damage.

Clean out chaff and debris

Air Screen

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could cre- ate a fire hazard and/or damage.

SPARK PLUG(S)

Replace spark plug(s) at the beginning of each mowing season or after every 100 hours of operation, whichever occurs

first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS"

section of this manual.

IN-LINE FUEL FILTER

The fuel filter should be replaced once each season. If fuel filter becomes

clogged, obstructing fuel flow to carbu- retor, replacement is required.

1.With engine cool, remove filter and plug fuel line sections.

2.Place new fuel filter in position in fuel line with arrow pointing towards carbu- retor.

3.Be sure there are no fuel line leaks and clamps are properly positioned.

4.Immediately wipe up any spilled gaso- line.

Clamp__clamp

Base

Fuel Filter

Slots

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Criiftsmhn Limitedwarrantyon Craftsmanridingequipment II. Slope Operation General OperationIV. Service Do notIII. Children Page Sears Installation Service Customer ResponsibilitiesRepair Protection Agreements For Future Use HOW to SET UP Your Tractor Check Battery Adjust SeatUnpack Carton Discharging Reposition Right Rear Gauge WheelCheck for Proper Position ALL Belts Check Brake SystemVchecklist @@@@ Tractor To SET Parking Brake To Adjust Mower Cutting HeightStopping EngineTo Operate Mower To Adjust Gauge WheelsTo Operate on Hills To TransportTowing Carts and Other Attach Ments Before Starting the Engine Check Engine OIL LevelADD Gasoline Purge Transmission Automatic Transmission Warm UPMowing Tips Mulching Mowing TipsGeneral Recommendations Maintenance ScheduleTractor BatteryOperator Presence System Blade CareEngine Lubrication Transaxle Pump FluidAIR Filter Engine OIL FilterEngine Cooling System MufflerTo Install Mower DisengagedTo Remove Mower To Level Mower Housing SIDE-TO-SIDE Adjustment with Bubble LevelFRONT-TO-BACK Adjustment To Check and Adjust Brake Both Front Links Must be Equal LengthTo Replace Mower Blade Drive Belt Replacement Lever Neutral AdjustmentTo Replace Motion Drive Belt Transaxle Motion ControlTo Adjust Steering Wheel Alignment Replacing BatteryTo Remove Wheel for Repairs To Replace Headlight Bulb To Adjust Throttle Control CableInterlocks and Relays To Replace FusePreliminary Setting To Adjust CarburetorFinal Setting Acceleration TestEngine OIL Engine Fuel SystemCylinders OtherProblem Cause CorrectionStart Cause Loss of powerCorrection ProblemcauseDiode SchematicElectrical Part Description Electrical KEYTractor - Model Number 917,273648 Chassis and Enclosures Part Description Tractor - Model Number Ground Drive KEY Part Description Tractor - Model Number 917,273648 Ground DriveTractor - Model Number 917,273648 Steering Assembly Tractor - Model Number 917.273648 Steering Assembly Optional Equipment Engine\25 13 \\\\ Tractor - Model Number Seat AssemblyPart Wheels Tires KEYPart KEY Description Tractor - Model Number 917,273648 Lift AssemblyTractor - Model Number 917,273648 Mower Deck 144 ,.....4sSTD Tractor Model Number206 KEY Part Description 783J Briggs ENGINE-MODEL Number 31P777, Type Number 0348-E1 105137 276 Dimensions Given in U.S. inches Page Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationOurHome

917.273648 specifications

The Craftsman 917.273648 is a powerful and versatile riding lawn mower designed for homeowners who seek efficiency in lawn maintenance. This riding mower is equipped with a robust 24-horsepower Kohler engine, ensuring it can tackle even the most challenging terrains with ease. Its reliable performance is matched with an easy-start feature, allowing you to fire up the engine without hassle.

One of the standout features of the Craftsman 917.273648 is its cutting deck, which measures 46 inches. This wide cutting deck allows for a more extensive mowing area, reducing the time spent on large lawns. The deck is engineered from high-quality steel, providing durability and resilience against wear and tear. Additionally, the deck height can be adjusted to six different positions ranging from 1.5 to 4 inches, giving users the flexibility to achieve their desired grass length.

The mower also incorporates advanced technologies such as a hydrostatic transmission, allowing for smooth and seamless speed adjustments while driving. This feature enhances the mowing experience, making it comfortable to navigate around obstacles without needing to shift gears manually. The tight turning radius of the Craftsman 917.273648 enables efficient maneuvering, making it easier to turn around flower beds or other landscaping features.

In terms of operator comfort, the Craftsman 917.273648 includes an ergonomic seat with ample padding, designed to minimize fatigue during extended mowing sessions. The controls are intuitively laid out, ensuring that users can operate the mower with minimal effort. Furthermore, the mower is equipped with an oversized lap bar, making it simple to control steering and braking.

Safety features are also a priority with this model. It comes with a safety switch that automatically shuts off the mower if the operator leaves the seat, preventing accidents. The rear engine placement enhances visibility while mowing, ensuring that users can safely navigate their landscapes.

Overall, the Craftsman 917.273648 combines power, comfort, and safety in a reliable riding mower. With its robust engine, versatile cutting deck, and user-friendly features, it stands out as a top choice for homeowners looking to maintain their lawns efficiently.
Top Page Image Contents