Craftsman 917.273648 manual Disengaged, To Remove Mower, To Install Mower

Page 22

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmis- sion are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

i&

 

ARNING:

TO

AVOID

SERIOUS

INJURY,

BEFORE

PERFORMING

ANY SER-

 

VICE OR ADJUSTMENTS:

 

 

 

 

 

 

 

 

 

 

 

1.

Depress

clutch/brake

pedal

fully

and

set parking

brake.

 

 

 

2.

Place

motion

control

lever

in neutral

(N)

position.

 

 

 

 

3.

Place

attachment

clutch

in

"DISENGAGED"

position.

 

 

 

4.

Turn

ignition

key

to "STOP"

and

remove

key.

 

 

 

 

5.

Make

sure the blades

and

all moving

parts

have

completely

stopped.

 

6.

Disconnect

 

spark

plug

wire

from

spark

plug

and

place wire

where

it cannot

 

 

come in contact with plug.

 

 

 

 

 

 

 

 

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the right side of tractor.

1.Place attachment clutch switch in "DIS- ENGAGED" position.

2.Move attachment lift lever forward to lower mower to its lowest position.

3.Roll belt off electric clutch pulley.

4.Disconnect anti-sway bar from chassis bracket by removing retainer spring.

5.Disconnect suspension arms from rear deck brackets by removing retainer springs.

Suspension

Arms

Retainer

Spring

Anti-Sway

Bar

6.Disconnect front links from deck by removing retainer springs.

7.Raise lift lever to raise suspension

arms. Slide mower out from under trac- tor.

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links.

TO INSTALL MOWER

1.Raise attachment lift lever to its highest position.

2.Slide mower under tractor with deflec- tor shield to right side of tractor.

3.Lower lift lever to its lowest position.

4.Connect front links to mower deck and secure with retainer springs.

Electric

Pulley

Front Link

Retainer Springs

(Both Sides)

Retainer Spring

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Criiftsmhn Limitedwarrantyon Craftsmanridingequipment General Operation II. Slope OperationDo not IV. ServiceIII. Children Page Customer Responsibilities Sears Installation ServiceRepair Protection Agreements For Future Use Adjust Seat HOW to SET UP Your Tractor Check BatteryUnpack Carton Check for Proper Position ALL Belts Reposition Right Rear Gauge WheelDischarging Check Brake SystemVchecklist @@@@ Tractor Stopping To Adjust Mower Cutting HeightTo SET Parking Brake EngineTo Operate on Hills To Adjust Gauge WheelsTo Operate Mower To TransportBefore Starting the Engine Check Engine OIL Level Towing Carts and Other Attach MentsADD Gasoline Automatic Transmission Warm UP Purge TransmissionMulching Mowing Tips Mowing TipsMaintenance Schedule General RecommendationsOperator Presence System BatteryTractor Blade CareTransaxle Pump Fluid Engine LubricationEngine Cooling System Engine OIL FilterAIR Filter MufflerDisengaged To Install MowerTo Remove Mower SIDE-TO-SIDE Adjustment with Bubble Level To Level Mower HousingFRONT-TO-BACK Adjustment Both Front Links Must be Equal Length To Check and Adjust BrakeTo Replace Mower Blade Drive Belt To Replace Motion Drive Belt Lever Neutral AdjustmentReplacement Transaxle Motion ControlReplacing Battery To Adjust Steering Wheel AlignmentTo Remove Wheel for Repairs Interlocks and Relays To Adjust Throttle Control CableTo Replace Headlight Bulb To Replace FuseFinal Setting To Adjust CarburetorPreliminary Setting Acceleration TestCylinders Engine Fuel SystemEngine OIL OtherCause Correction ProblemStart Loss of power CauseProblemcause CorrectionSchematic DiodeElectrical Electrical KEY Part DescriptionTractor - Model Number 917,273648 Chassis and Enclosures Part Description Tractor - Model Number Ground Drive Tractor - Model Number 917,273648 Ground Drive KEY Part DescriptionTractor - Model Number 917,273648 Steering Assembly Tractor - Model Number 917.273648 Steering Assembly Engine Optional EquipmentTractor - Model Number Seat Assembly \25 13 \\\\Wheels Tires KEY PartTractor - Model Number 917,273648 Lift Assembly Part KEY Description144 ,.....4s Tractor - Model Number 917,273648 Mower DeckTractor Model Number STD206 KEY Part Description 783J Briggs ENGINE-MODEL Number 31P777, Type Number 0348-E1 105137 276 Dimensions Given in U.S. inches Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXOurHome

917.273648 specifications

The Craftsman 917.273648 is a powerful and versatile riding lawn mower designed for homeowners who seek efficiency in lawn maintenance. This riding mower is equipped with a robust 24-horsepower Kohler engine, ensuring it can tackle even the most challenging terrains with ease. Its reliable performance is matched with an easy-start feature, allowing you to fire up the engine without hassle.

One of the standout features of the Craftsman 917.273648 is its cutting deck, which measures 46 inches. This wide cutting deck allows for a more extensive mowing area, reducing the time spent on large lawns. The deck is engineered from high-quality steel, providing durability and resilience against wear and tear. Additionally, the deck height can be adjusted to six different positions ranging from 1.5 to 4 inches, giving users the flexibility to achieve their desired grass length.

The mower also incorporates advanced technologies such as a hydrostatic transmission, allowing for smooth and seamless speed adjustments while driving. This feature enhances the mowing experience, making it comfortable to navigate around obstacles without needing to shift gears manually. The tight turning radius of the Craftsman 917.273648 enables efficient maneuvering, making it easier to turn around flower beds or other landscaping features.

In terms of operator comfort, the Craftsman 917.273648 includes an ergonomic seat with ample padding, designed to minimize fatigue during extended mowing sessions. The controls are intuitively laid out, ensuring that users can operate the mower with minimal effort. Furthermore, the mower is equipped with an oversized lap bar, making it simple to control steering and braking.

Safety features are also a priority with this model. It comes with a safety switch that automatically shuts off the mower if the operator leaves the seat, preventing accidents. The rear engine placement enhances visibility while mowing, ensuring that users can safely navigate their landscapes.

Overall, the Craftsman 917.273648 combines power, comfort, and safety in a reliable riding mower. With its robust engine, versatile cutting deck, and user-friendly features, it stands out as a top choice for homeowners looking to maintain their lawns efficiently.
Top Page Image Contents