Craftsman 917.273648 manual To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse

Page 27

Keps Nut

Hex Bolt

 

Positive

Terminal

(Red) Cable

 

Guard

Negative

'':

(Black) Cable

TO REPLACE HEADLIGHT BULB

1.Raise hood.

2.Pull bulb holder out of the hole in the backside of the grill.

3.Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

4.Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause

your tractor to run poorly, stop running, or prevent it from starting.

•Check wiring. See electrical wiring

diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type

plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL AS- SEMBLY

1.Raise hood.

2.Unsnap headlight wire connector.

3.Stand in front of tractor. Grasp hood at

sides, tilt toward engine and lift off of tractor.

4.When replacing hood, be sure to reconnect the headlight wire connector.

Headlight Wire

Connector

ENGINE

Maintenance, repair, or replacement of the emission control devices and systems, which are being done at the customers ex- pense, may be performed by any non-road

engine repair establishment or individual. Warranty repairs must be performed by an

authorized engine manufacturer's service outlet.

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be nec- essary. Check adjustment as described below before loosening cable. If adjust- ment is necessary, proceed as follows:

1.With engine not running, move throttle control lever from slow to choke posi- tion. Slowly move lever from choke to fast position.

2.Check that holes"A" in governor

control lever and hole in governor plate line-up. If holes "A" are not aligned, loosen clamp screw and move throttle cable until holes are aligned. Tighten clamp screw securely.

GovernorGovernor

Control Lever /Control Plate

Holes "A" "\ % Clam/p"_ _J3@_ Throttle

_o-_ew - Cable

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Criiftsmhn Limitedwarrantyon Craftsmanridingequipment II. Slope Operation General OperationIV. Service Do notIII. Children Page Sears Installation Service Customer ResponsibilitiesRepair Protection Agreements For Future Use HOW to SET UP Your Tractor Check Battery Adjust SeatUnpack Carton Check Brake System Reposition Right Rear Gauge WheelDischarging Check for Proper Position ALL BeltsVchecklist @@@@ Tractor Engine To Adjust Mower Cutting HeightTo SET Parking Brake StoppingTo Transport To Adjust Gauge WheelsTo Operate Mower To Operate on HillsTowing Carts and Other Attach Ments Before Starting the Engine Check Engine OIL LevelADD Gasoline Purge Transmission Automatic Transmission Warm UPMowing Tips Mulching Mowing TipsGeneral Recommendations Maintenance ScheduleBlade Care BatteryTractor Operator Presence SystemEngine Lubrication Transaxle Pump FluidMuffler Engine OIL FilterAIR Filter Engine Cooling SystemTo Install Mower DisengagedTo Remove Mower To Level Mower Housing SIDE-TO-SIDE Adjustment with Bubble LevelFRONT-TO-BACK Adjustment To Check and Adjust Brake Both Front Links Must be Equal LengthTo Replace Mower Blade Drive Belt Transaxle Motion Control Lever Neutral AdjustmentReplacement To Replace Motion Drive BeltTo Adjust Steering Wheel Alignment Replacing BatteryTo Remove Wheel for Repairs To Replace Fuse To Adjust Throttle Control CableTo Replace Headlight Bulb Interlocks and RelaysAcceleration Test To Adjust CarburetorPreliminary Setting Final SettingOther Engine Fuel SystemEngine OIL CylindersProblem Cause CorrectionStart Cause Loss of powerCorrection ProblemcauseDiode SchematicElectrical Part Description Electrical KEYTractor - Model Number 917,273648 Chassis and Enclosures Part Description Tractor - Model Number Ground Drive KEY Part Description Tractor - Model Number 917,273648 Ground DriveTractor - Model Number 917,273648 Steering Assembly Tractor - Model Number 917.273648 Steering Assembly Optional Equipment Engine\25 13 \\\\ Tractor - Model Number Seat AssemblyPart Wheels Tires KEYPart KEY Description Tractor - Model Number 917,273648 Lift AssemblyTractor - Model Number 917,273648 Mower Deck 144 ,.....4sSTD Tractor Model Number206 KEY Part Description 783J Briggs ENGINE-MODEL Number 31P777, Type Number 0348-E1 105137 276 Dimensions Given in U.S. inches Page Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationOurHome

917.273648 specifications

The Craftsman 917.273648 is a powerful and versatile riding lawn mower designed for homeowners who seek efficiency in lawn maintenance. This riding mower is equipped with a robust 24-horsepower Kohler engine, ensuring it can tackle even the most challenging terrains with ease. Its reliable performance is matched with an easy-start feature, allowing you to fire up the engine without hassle.

One of the standout features of the Craftsman 917.273648 is its cutting deck, which measures 46 inches. This wide cutting deck allows for a more extensive mowing area, reducing the time spent on large lawns. The deck is engineered from high-quality steel, providing durability and resilience against wear and tear. Additionally, the deck height can be adjusted to six different positions ranging from 1.5 to 4 inches, giving users the flexibility to achieve their desired grass length.

The mower also incorporates advanced technologies such as a hydrostatic transmission, allowing for smooth and seamless speed adjustments while driving. This feature enhances the mowing experience, making it comfortable to navigate around obstacles without needing to shift gears manually. The tight turning radius of the Craftsman 917.273648 enables efficient maneuvering, making it easier to turn around flower beds or other landscaping features.

In terms of operator comfort, the Craftsman 917.273648 includes an ergonomic seat with ample padding, designed to minimize fatigue during extended mowing sessions. The controls are intuitively laid out, ensuring that users can operate the mower with minimal effort. Furthermore, the mower is equipped with an oversized lap bar, making it simple to control steering and braking.

Safety features are also a priority with this model. It comes with a safety switch that automatically shuts off the mower if the operator leaves the seat, preventing accidents. The rear engine placement enhances visibility while mowing, ensuring that users can safely navigate their landscapes.

Overall, the Craftsman 917.273648 combines power, comfort, and safety in a reliable riding mower. With its robust engine, versatile cutting deck, and user-friendly features, it stands out as a top choice for homeowners looking to maintain their lawns efficiently.
Top Page Image Contents