Craftsman 917.273648 manual Unpack Carton, HOW to SET UP Your Tractor Check Battery, Adjust Seat

Page 8

Your new tractor has been assembled at the factory. Review the video cassette before you begin.

When right or left hand is mentioned in this manual, it means when you are in the oper- ating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

1.Cut along dotted lines on all four pan- els of carton. Remove end panels and lay side panels flat.

2.Remove protective materials from trac- tor hood and grille.

IMPORTANT: Check for and remove any staples in skid that may puncture tires where tractor is to roll off skid.

HOW TO SET UP YOUR TRACTOR

CHECK BATTERY

1.Lift hood to raised position.

NOTE: If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instruc- tions).

' Label

ADJUST SEAT

1.Raise seat and loosen adjustment knob.

2.Lower seat into operating position and sit in seat.

3.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

4.Get off seat without moving its adjusted position.

5.Raise seat and tighten adjustment knob securely.

Adjustment

Knob

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See

Operation section for location and

function of controls)

1.Press lift lever plunger and raise

attachment lift lever to its highest po- sition.

2.Release parking brake by depressing clutch/brake pedal.

3.Place freewheel control in "trans- mission disengaged" position (See "TO

TRANSPORT" in the Operation section of this manual).

4.Roll tractor forward off skid.

5.Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Operation section for location and function of controls)

_WARNING: Before starting, read, un- derstand and follow all instructions in the

Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other

people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Place freewheel control in "trans- mission engaged" position. (See "TO TRANSPORT" in the Operation section of this manual).

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Criiftsmhn Limitedwarrantyon Craftsmanridingequipment General Operation II. Slope OperationIII. Children IV. ServiceDo not Page Repair Protection Agreements Sears Installation ServiceCustomer Responsibilities For Future Use Unpack Carton HOW to SET UP Your Tractor Check BatteryAdjust Seat Reposition Right Rear Gauge Wheel DischargingCheck for Proper Position ALL Belts Check Brake SystemVchecklist @@@@ Tractor To Adjust Mower Cutting Height To SET Parking BrakeStopping EngineTo Adjust Gauge Wheels To Operate MowerTo Operate on Hills To TransportADD Gasoline Towing Carts and Other Attach MentsBefore Starting the Engine Check Engine OIL Level Automatic Transmission Warm UP Purge TransmissionMulching Mowing Tips Mowing TipsMaintenance Schedule General RecommendationsBattery TractorOperator Presence System Blade CareTransaxle Pump Fluid Engine LubricationEngine OIL Filter AIR FilterEngine Cooling System MufflerTo Remove Mower To Install MowerDisengaged FRONT-TO-BACK Adjustment To Level Mower HousingSIDE-TO-SIDE Adjustment with Bubble Level To Replace Mower Blade Drive Belt To Check and Adjust BrakeBoth Front Links Must be Equal Length Lever Neutral Adjustment ReplacementTo Replace Motion Drive Belt Transaxle Motion ControlTo Remove Wheel for Repairs To Adjust Steering Wheel AlignmentReplacing Battery To Adjust Throttle Control Cable To Replace Headlight BulbInterlocks and Relays To Replace FuseTo Adjust Carburetor Preliminary SettingFinal Setting Acceleration TestEngine Fuel System Engine OILCylinders OtherStart ProblemCause Correction Loss of power CauseProblemcause CorrectionSchematic DiodeElectrical Electrical KEY Part DescriptionTractor - Model Number 917,273648 Chassis and Enclosures Part Description Tractor - Model Number Ground Drive Tractor - Model Number 917,273648 Ground Drive KEY Part DescriptionTractor - Model Number 917,273648 Steering Assembly Tractor - Model Number 917.273648 Steering Assembly Engine Optional EquipmentTractor - Model Number Seat Assembly \25 13 \\\\Wheels Tires KEY PartTractor - Model Number 917,273648 Lift Assembly Part KEY Description144 ,.....4s Tractor - Model Number 917,273648 Mower DeckTractor Model Number STD206 KEY Part Description 783J Briggs ENGINE-MODEL Number 31P777, Type Number 0348-E1 105137 276 Dimensions Given in U.S. inches Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXOurHome

917.273648 specifications

The Craftsman 917.273648 is a powerful and versatile riding lawn mower designed for homeowners who seek efficiency in lawn maintenance. This riding mower is equipped with a robust 24-horsepower Kohler engine, ensuring it can tackle even the most challenging terrains with ease. Its reliable performance is matched with an easy-start feature, allowing you to fire up the engine without hassle.

One of the standout features of the Craftsman 917.273648 is its cutting deck, which measures 46 inches. This wide cutting deck allows for a more extensive mowing area, reducing the time spent on large lawns. The deck is engineered from high-quality steel, providing durability and resilience against wear and tear. Additionally, the deck height can be adjusted to six different positions ranging from 1.5 to 4 inches, giving users the flexibility to achieve their desired grass length.

The mower also incorporates advanced technologies such as a hydrostatic transmission, allowing for smooth and seamless speed adjustments while driving. This feature enhances the mowing experience, making it comfortable to navigate around obstacles without needing to shift gears manually. The tight turning radius of the Craftsman 917.273648 enables efficient maneuvering, making it easier to turn around flower beds or other landscaping features.

In terms of operator comfort, the Craftsman 917.273648 includes an ergonomic seat with ample padding, designed to minimize fatigue during extended mowing sessions. The controls are intuitively laid out, ensuring that users can operate the mower with minimal effort. Furthermore, the mower is equipped with an oversized lap bar, making it simple to control steering and braking.

Safety features are also a priority with this model. It comes with a safety switch that automatically shuts off the mower if the operator leaves the seat, preventing accidents. The rear engine placement enhances visibility while mowing, ensuring that users can safely navigate their landscapes.

Overall, the Craftsman 917.273648 combines power, comfort, and safety in a reliable riding mower. With its robust engine, versatile cutting deck, and user-friendly features, it stands out as a top choice for homeowners looking to maintain their lawns efficiently.
Top Page Image Contents