Craftsman 917.273648 manual Do not, III. Children, IV. Service

Page 4

DO:

Mow up and down slopes, not across.

Remove obstacles such as rooks, tree limbs, etc.

Watch for holes, ruts, or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Choose a low gear so that you will not have to stop or shift while on the slope.

Follow the manufacturer's recommend- ations for wheel weights or counter- weights to improve stability.

Use extra care with grass catchers or

other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly straight down the

slope.

DO NOT:

Do not turn on slopes unless neces- sary, and then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches,

or embankments. The mower could suddenly turn over if a wheel is over

the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use grass catcher on steep slopes.

III.CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the mowing area and under the watchful care of another

responsible adult.

Be alert and turn machine off if children enter the area.

Before and when backing, look behind and down for small children.

Never carry children. They may fall off and be seriously injured or interfere with safe machine operation.

Never allow children to operate the machine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SERVICE

Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel container inside where there is an open flame, such as a water heater.

Never run a machine inside a closed area.

Keep nuts and bolts, especially blade attachment bolts, tight and keep equip- ment in good condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make adjustments or repairs with the engine running.

Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with

manufacturer's recommended parts, when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Ad- just and service as required.

Image 4
Contents Criiftsmhn Limitedwarrantyon Craftsmanridingequipment General Operation II. Slope OperationDo not IV. ServiceIII. Children Page Customer Responsibilities Sears Installation ServiceRepair Protection Agreements For Future Use Adjust Seat HOW to SET UP Your Tractor Check BatteryUnpack Carton Reposition Right Rear Gauge Wheel DischargingCheck for Proper Position ALL Belts Check Brake SystemVchecklist @@@@ Tractor To Adjust Mower Cutting Height To SET Parking BrakeStopping EngineTo Adjust Gauge Wheels To Operate MowerTo Operate on Hills To TransportBefore Starting the Engine Check Engine OIL Level Towing Carts and Other Attach MentsADD Gasoline Automatic Transmission Warm UP Purge TransmissionMulching Mowing Tips Mowing TipsMaintenance Schedule General RecommendationsBattery TractorOperator Presence System Blade CareTransaxle Pump Fluid Engine LubricationEngine OIL Filter AIR FilterEngine Cooling System MufflerDisengaged To Install MowerTo Remove Mower SIDE-TO-SIDE Adjustment with Bubble Level To Level Mower HousingFRONT-TO-BACK Adjustment Both Front Links Must be Equal Length To Check and Adjust BrakeTo Replace Mower Blade Drive Belt Lever Neutral Adjustment ReplacementTo Replace Motion Drive Belt Transaxle Motion ControlReplacing Battery To Adjust Steering Wheel AlignmentTo Remove Wheel for Repairs To Adjust Throttle Control Cable To Replace Headlight BulbInterlocks and Relays To Replace FuseTo Adjust Carburetor Preliminary SettingFinal Setting Acceleration TestEngine Fuel System Engine OILCylinders OtherCause Correction ProblemStart Loss of power CauseProblemcause CorrectionSchematic DiodeElectrical Electrical KEY Part DescriptionTractor - Model Number 917,273648 Chassis and Enclosures Part Description Tractor - Model Number Ground Drive Tractor - Model Number 917,273648 Ground Drive KEY Part DescriptionTractor - Model Number 917,273648 Steering Assembly Tractor - Model Number 917.273648 Steering Assembly Engine Optional EquipmentTractor - Model Number Seat Assembly \25 13 \\\\Wheels Tires KEY PartTractor - Model Number 917,273648 Lift Assembly Part KEY Description144 ,.....4s Tractor - Model Number 917,273648 Mower DeckTractor Model Number STD206 KEY Part Description 783J Briggs ENGINE-MODEL Number 31P777, Type Number 0348-E1 105137 276 Dimensions Given in U.S. inches Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXOurHome

917.273648 specifications

The Craftsman 917.273648 is a powerful and versatile riding lawn mower designed for homeowners who seek efficiency in lawn maintenance. This riding mower is equipped with a robust 24-horsepower Kohler engine, ensuring it can tackle even the most challenging terrains with ease. Its reliable performance is matched with an easy-start feature, allowing you to fire up the engine without hassle.

One of the standout features of the Craftsman 917.273648 is its cutting deck, which measures 46 inches. This wide cutting deck allows for a more extensive mowing area, reducing the time spent on large lawns. The deck is engineered from high-quality steel, providing durability and resilience against wear and tear. Additionally, the deck height can be adjusted to six different positions ranging from 1.5 to 4 inches, giving users the flexibility to achieve their desired grass length.

The mower also incorporates advanced technologies such as a hydrostatic transmission, allowing for smooth and seamless speed adjustments while driving. This feature enhances the mowing experience, making it comfortable to navigate around obstacles without needing to shift gears manually. The tight turning radius of the Craftsman 917.273648 enables efficient maneuvering, making it easier to turn around flower beds or other landscaping features.

In terms of operator comfort, the Craftsman 917.273648 includes an ergonomic seat with ample padding, designed to minimize fatigue during extended mowing sessions. The controls are intuitively laid out, ensuring that users can operate the mower with minimal effort. Furthermore, the mower is equipped with an oversized lap bar, making it simple to control steering and braking.

Safety features are also a priority with this model. It comes with a safety switch that automatically shuts off the mower if the operator leaves the seat, preventing accidents. The rear engine placement enhances visibility while mowing, ensuring that users can safely navigate their landscapes.

Overall, the Craftsman 917.273648 combines power, comfort, and safety in a reliable riding mower. With its robust engine, versatile cutting deck, and user-friendly features, it stands out as a top choice for homeowners looking to maintain their lawns efficiently.