Craftsman 917.272054 Howto Useyourtractor To SET Parking Brake, Stopping, Ground Drive, Engine

Page 13

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOWTO USEYOURTRACTOR

TO SET PARKING BRAKE

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat withoutfirst setting the parking brake will shut off the engine.

1.Depress clutch/brake pedal into full "BRAKE" position and hold.

2.Place parking brake lever in "EN- GAGED" posiUonand release pressure from clutch/brake pedal.

Pedal should remain in "BRAKE"

position. Make sure parking brake will hold tractor secure.

AttachmentClutchLever

+Engaged"Position

Throttle/

Choke

"Disengaged"

Brake

Clutch/

Brake,

Lever

PositionPosition

STOPPING

MOWER BLADES -

•To stop mower blades,meve attach- ment clutch lever to "DISENGAGED" position.

GROUND DRIVE -

•To stop ground ddve, depress clutch/ brake pedal into full "BRAKE" position.

•Move gearshift lever to neutral (N) position.

ENGINE-

•Move throttle control to slow position.

NOTE: Failure to move throttle control to slow position and allowing engine to idle before stopping may cause engine to "backfire".

•Turn ignition key to "OFF" pesiUon and remove key. Always remove key when

leaving tractor to prevent unauthodzed

use,

IMPORTANT: Leaving the ignition switch in any position other than "OFF" will

cause the battery to be discharged, (dead).

NOTE: Under certain conditionswhen tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when

_Ocppingtractor on grass areas.

AUTION: Always stop tractor completely, as described above, before leaving the operator'sposition;to empty grass catcher, etc.

TO USE THROTTLE CONTROL

Always operate engine at full throttle.

•Operating engine at less then full throttle reduces the battery charging rate.

•Full throttle offers the best bagging and

mower performance.

TO MOVE FORWARD AND BACKWARD

The direction and speed of movement is controlled by the gearshift lever.

1.Start tractor with clutch/brake pedal depressed and gearshift lever in neutral (N) position.

2.Move gearshift lever to desired position.

3.Slowly release clutch/brake pedal to start movement,

IMPORTANT: Bring tractorto a complete

stop before shifting or changing gears. Failure to do so will shorten the useful life

of your transaxle.

TO ADJUST MOWER CUTTING HEIGHT

The position of the attachment lift lever determines the cutting height.

•Grasp lift lever.

•Press plunger with thumb and move lever to desired position.

The cutting height range is approxi- mately 1-1/2 to 4". The heightsare measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

• Never use choke to stop engine.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents For answers to your questions Lawn TractorLimited 90 DAY Warranty on Battery Mow only in daylight or good artificial light General OperationI1. Slope Operation IV. Service Cancer and birth defects or other repro- ductive harm Productspecifications Ooo Before Removing Tractor from Skid Attachsteeringwheel Lower seat into operating position and sit in seat Install SeatTo Convertto Bagging or Discharging Install Mulcher PlateChecktire Pressure Check Deck LevelnessBattery Reverse Forward Fast Knowyourtractor Ammeter Indicates charging + or discharging of batteryHowto Useyourtractor To SET Parking Brake To Adjust Mower Cutting HeightStopping Ground DriveTo Operate Mower To Adjust Gauge WheelsTo Operate on Hills To TransportBefore Starting the Engine Check Engine OIL Level Towing Carts and Other AttachmentsADD Gasoline To Start EngineMulching Mowingtips General Recommendations Lubrication ChartBefore Each USE Tractor Clean AIR Screen To Clean Battery and TerminalsClean AIR INTAKE/COOLING Areas BeltsAIR Filter To Service CartridgeEngine OIL Filter IN-LINE Fuel FilterTo Install Mower CleaningTo Remove Mower Raise attachment lift lever to its highest positionSIDE-TO-SIDE Adjustment To Level Mower HousingTo Replace Mower Blade Drive Belt To Adjust BrakePulley To Replace Motion Drive BeltTo Start Engine with a Weak Battery Transaxle Gear Shift Lever Neutral AdjustmentTo Adjust Steering Wheel ALIGN- Ment To Remove Wheel for RepairsTo Remove Hood and Grill Assembly Replacing BatteryTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Carburetor To Adjust Throttle Control CableTractor To Clean Battery and TermiEngine Fuel System Engine OILProblem TroubleshootingchartCause CorrectionTroubleshooting Chart Problem Cause Cause Correction Troubleshooting Chart ProblemFor 30 seconds before Stopping engineTCR- Model Number SchematicTRACTOR- -MODEL NUM BER Electrical NO. NO,DESCRIPTION TRACTOR-- Model Number ElectricalTractor - Model Number 917.272054 Chassis and Enclosures KEY Part NO, NO, Description TRACTOR- -MODELNUMBER917.272054 ChassisandenclosuresTRACTOR- -MODEL Number Ground Drive X .1645/1865 TRACTOR- Model Number Ground DriveShift Rate TRACTOR--MODEL Number Steering Assembly KEY Part NO. NO.DESCRIPTION TRACTOR- Model Number 917.272054 SteeringassemblyKEY Part Description TRACTOR--MODELNUMBER917.272054 EngineTRACTOR-- MODELNUMBER917.272054 Seatassembly TRACTOR- Model Number Decals DecaJ, V-Belt SchematicWheels & Tires 99904TRACTOR- Model Number Liftassembly TRACTOR-- Model Number Mowerdeck STD693107 TRACTORMODELNUMBER917--.272054 MowerdeckPage PEERLESSTRANSAXLE- Model NUMBER206-545C TRACTOR--MODELNUMBER917.272054Ring Oil Seal 9 1Cylinder HEAD, Valve and Breaiieri Crankcasi 25-186-01-S Gasket14-0 25-086-47.S Blower Housing Baffles KEY Part DescriponStarting System Engine Controls OIL PAN / Lubrication KEY Part NO. NO.DESCRIPTION Crankshaft Exhaus AvailablePage Page Page Suggested Guide for Sighting Slopes for Safe Operation 178457 2.20,01 RD 3s6-7278 Sears,com/patsdirect

917.272054 specifications

The Craftsman 917.272054 is a robust and efficient riding lawn mower designed to make lawn maintenance a breeze. This machine features a powerful 24 HP Kohler engine, delivering reliable performance and significant torque, enabling it to tackle even the toughest grass and terrain with ease. One of the standout characteristics of the 917.272054 is its hydrostatic transmission, which offers smooth and variable speed control. This allows the operator to maneuver easily without the need for gear shifting, providing a more comfortable mowing experience.

Equipped with a 54-inch cutting deck, the Craftsman 917.272054 allows for a wide cutting path, significantly reducing mowing time, especially for larger lawns. The cutting deck features multiple height adjustments, ranging from 1.5 to 4 inches, allowing users to achieve the perfect cut tailored to the specific needs of their grass type. This adaptability promotes healthy grass growth and enhances the overall appearance of the lawn.

The mower also showcases a rugged and durable construction, making it suitable for various conditions. The front axle is designed for added stability, while the reinforced deck is engineered to withstand the rigors of frequent use. Another notable feature is the comfortable high-back seat that provides excellent lumbar support, essential for long mowing sessions.

For enhanced convenience, the Craftsman 917.272054 includes an easy-to-use dashboard with essential controls conveniently located for quick adjustments while operating. The ignition switch is designed for easy starting, and the mower includes a sturdy grass collection system for effortless cleaning and maintenance.

Additionally, this lawn mower is compatible with various attachments, including baggers, mulch kits, and other accessories, allowing users to customize their mowing experience based on their lawn care needs. Safety features like the operator presence control ensure that the mower will shut off if the operator leaves the seat, adding an extra layer of protection.

Overall, the Craftsman 917.272054 stands out as an exemplary choice for homeowners seeking a reliable and efficient lawn mower that combines power, functionality, and user-friendly design. With its advanced features and technologies, it makes lawn maintenance not only easier but also more enjoyable.
Top Page Image Contents