Craftsman 917.271142 manual Fuel System, Engineoil, Cylinders, Other

Page 27

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

CAUTION: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure:

_A_OR

Remove mower from tractor for winter

storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

•Clean entire tractor (See "CLEANING" in the Maintenance section of this

manual).

•Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Mainte- nance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BA'I-rERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected and battery cleaned

thoroughly (see 'q-OCLEAN BATTERY AND TERMINALS" in the Maintenance

section of this manual).

•After cleaning, leave cables discon- nected and place cables where they

cannot come in contact with battery terminals.

•If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent _uUmdeposits from forming in essential

el system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Also, experience indicates that alcohol blended fuels called gasohol or using

ethanol or methanol) can attract moisture which leads to separation and formation

of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

•Drain the fuel tank.

•Start the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or

storage container. Always follow the mix ratio found on stabilizer container. Run

engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach

the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINEOIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug(s).

•Pour one ounce of oil through spark plug hole(s) into cylinder(s).

•Turn ignition key to "START" position for a few seconds to distribute oil.

•Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your tractor indoors and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable protective cover that does not retain

moisture. Do not use plastic. Plastic cannot breathe which allows conden-

sation to form and will cause your tractor to rust.

IMPORTANT: Never cover tractor while engine and exhaust areas are still

warm.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Icraftsmani Limited 90 DAY Warranty on Battery Children General OperationSlope Operation Do notGrass can hide obstacles ServiceRepair Agreement Customer ResponsibilitiesIiiiiii Unpack Carton Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from Skid Attach Steering WheelHOW to SET UP Your Tractor Check BatteryInstall Seat Check for Proper Position of ALL Belts To Convert to Bagging or DischargingCheck Tire Pressure Check Deck LevelnessH L Ammeter Know Your TractorHOW to USE Your Tractor To Adjust Gauge Wheels On HillsTo Transport To Start Engine Before Starting the EngineADD Gasoline Check Engine OIL LevelPurge Transmission Automatic Transmission Warm UPMowing Tips Mulching Mowing TipsBefore Each USE General RecommendationsTo Sharpen Blade BatteryBlade Care Blade RemovalTransaxle Pump Fluid To Clean Battery and TerminalsBelts Transaxle CoolingAIR Filter Engine OIL FilterIN-LINE Fuel Filter To Remove Mower To Install MowerTo Replace Mower Blade Drive Belt To Level Mower HousingSIDE-TO-SIDE Adjustment Belt InstallationTransmission REMOVAIJREPLACE- Ment To Adjust BrakeTransaxle Motion Control Lever Neutral Adjustment To Replace Motion Drive BeltTo Attach Jumper Cables To Adjust Steering Wheel ALIGN- MentFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsTo Replace Fuse To Remove Hood and Grill AssemblyTo Replace Headlight Bulb Interlocks and RelaysAcceleration Test To Adjust CarburetorCylinders EngineFuel System EngineoilCorrection Troubleshooting ChartProblem CauseTroubleshooting Chart Charge Problem Cause CorrectionTractor - Model Number SchematicTRACTOR-- Model Number Electrical KEY Part Description ElectricalTRACTOR-- Model Number 917.271142 Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Tractor - Model Number Chassis and EnclosuresGround Drive Tractor - Model Number KEY Part Description Tractor - Model Number Ground DriveTractor - Model Number 917.271142 Steering Assembly Assembly Tractor - Model Number Steering AssemblyEngine Optional EQUIPMENT23 Muffler Tractor - Model Number Seat Assembly Wheels & Tires DecalsTractor - Model Number Lift Assembly KEY Part NO. NO.DESCRIPTION Tractor - Model Number Mower Deck 132274 KEY Part NO. no9OO 142892 Part KEY DescriptionCylinder HEAD, Valve and Breather Crankcase Lifter, valve Cylinder HEAD/VALVE/BREATHER Crankcase KEY Part DescriptionIgnition / Electrical Blower Housing and Baffles AIR Intake AIRINTAKE/FILTRATION Hex. flange82 @ Engine Controls Part Description01L PAN!LUBRICATION Crankshaft J Fuel System Exhaust Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationGet it fixed, at your home or ours

917.271142 specifications

The Craftsman 917.271142 is a versatile and robust lawn mower that caters to homeowners seeking an efficient solution for their yard care needs. This model is designed for residential use and combines cutting-edge technology with user-friendly features, making it an excellent choice for both experienced and novice gardeners.

One of the standout features of the Craftsman 917.271142 is its powerful 21-inch steel deck, which provides an ideal cutting width for tackling a variety of grass conditions. This deck is designed for durability, ensuring that it can withstand the rigors of lawn maintenance season after season. The mower's adjustable cutting height ranges from 1 to 4 inches, offering flexibility to achieve the desired grass length to suit individual preferences and seasonal variations.

The Craftsman 917.271142 is equipped with a reliable Briggs & Stratton engine, known for its potent performance and ease of start. This engine provides sufficient power to handle thick grass and tough terrain while ensuring consistent cutting results. Additionally, the mower includes a self-propelled feature, which significantly reduces fatigue during long mowing sessions, allowing users to navigate uneven landscapes effortlessly.

In terms of technology, the Craftsman 917.271142 integrates a mulch kit, allowing for efficient grass clipping recycling. This system breaks down clippings into fine pieces that can be evenly distributed back onto the lawn, promoting healthier soil and reducing waste. For those who prefer traditional bagging, the mower also features a rear bagger option, making cleanup a breeze.

User convenience is further enhanced by ergonomic design elements. The adjustable handle ensures a comfortable grip for different user heights and can be easily folded for compact storage. The mower's large rear wheels provide improved maneuverability on various terrains, giving users better control during operation.

Maintenance is straightforward due to the mower's design, enabling easy access to the air filter and spark plug, which simplifies routine check-ups and repairs. Overall, the Craftsman 917.271142 combines power, efficiency, and user-centric features to make lawn care less of a chore and more of an enjoyable outdoor activity. Whether you are dealing with an expansive yard or a smaller garden, this mower is engineered to deliver reliable performance year after year.
Top Page Image Contents