Craftsman 917.270961 manual HOW to SET UP Your Tractor, To Drive Tractor OFF Skid, Check Battery

Page 8

HOW TO SET UP YOUR TRACTOR

CHECK BATTERY

•Lift hood to raised position.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one

hour at 6-10 amps. (See =BATTERY" in Maintenance section of this manual

for charging instructions).

"'" "°' ' Label

INSTALL SEAT

Adjust seat before tightening adjustment knob.

•Remove• adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

•Place seat on seat pan and assemble shoulder bo_t. Tighten shoutder bolt securely.

•Assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

Shoulder Bolt

Seat Pan

Seat

Flat Washer

Adjustment Knob

NOTE: You may now roll or drive you tractor off the skid. Follow the appropri- ate instruction below to remove the tractor from the skid,

TO ROLLTRACTOR OFF SKID (See Operation section for location and function of controls)

•Press lift lever plunger and raise

attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place freewheel control in freewheel- ing position to disengage transmission (See "TO TRANSPORT* in the Opera- tion section of this manual).

•Roll tractor forward off skid.

•Remove banding holding discharge guard up against tractor.

TO DRIVE TRACTOR OFF SKID

(See Operation section for location and function of controls)

[!ILWARNING: Before starting, read, understand and follow all instructions in

the Operation section of this manual. Be sure tractor is in a well-ventilated area.

Be sure the area in front of tractor is clear of other people and objects,

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Place freewheel control in "transmis- sion engaged" position.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place motion control lever in neutral

(N)position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle position.

•Release parking brake.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents £RAFTZMANo Parts Ordering Back Cover General OperationService Slope OperationDo not ChildrenTIONI!! Become AWARE!!! Your Safety is Involved Machine. Tall grass can hide obsta- clesProduct Specifications Steering Wheel Before Removing Tractor From Skid Attach Steering WheelHOW to SET UP Your Tractor Check BatteryInstall Seat To Drive Tractor OFF SkidTo Convert to Bagging or Discharging Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsAll assembly instructions have been completed While Learning HOW to USE YoufH L Knowyourtractor HOW to USE Your Tractor To Adjust Gauge Wheels To Operate MowerTo Operate on Hills To TransportADD Gasoline To Start EngineBefore Starting the Enigne Check Engine OIL Level Purge Transmission Mowing Tips Mulching Mowing TipsLubrication Chart Maintenance ScheduleGeneral Recommendations Before Each USETires Operator Presence SystemTocleanbatteryandterminals Clean AIR ScreenClean AIR INTAKE/COOUNG Areas To Service PRE-CLEANERSpark Plugs IN-LINE Fuel FilterCleaning To Install MowerTo Level Mower Housing TractorFRONT-TO-BACK Adjustment To Level Mower HousingSIDE-TO-SIDE Adjustment Belt Installation To Adjust BrakeTo Replace Mower Blade Drive Belt Belt RemovalTo Adjust Steering Wheel Alignment Transaxle Motion Control Lever Neutral AdjustmentTransmission REMOVAL/REPLACE- Ment Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak Battery Replacing BatteryTo Replace Headlight Bulb Interlocks and RelaysTo Remove Hood and Grill Assembly To Adjust CarburetorTo Adjust Throttle Control Cable To Adjust Choke ControlIdle Speed Lever =---,f \Idle Mixture Screw Engine Fuel System CylindersOther EngineoilTroubleshooting Chart ProblemCause CorrectionCorrection ProblemChart Cause Problemcause SlowSchematic Tractor -. Model NumberTractor - Model Number Electrical Tractor - Model Number Electrical KEYTractor - Model Number Chassis and Enclosures Tractor - Model Number 917.270961 Chassisand Enclosures IL=Y Part DesciiptionTractor - Model Number Ground Drive Tractor --MODEL Number Ground Drive KEY Part DescriptionTractor - Model Number 917.270961 Steering Assembly Tractor --MODEL Number Steering Assembly 12000029Optional Equipment EngineTractor - Model Number Engine Part Description Tractor - Model Number Seat Assembly Part KEY Part Description DESCRIP/1ONTractor --MODEL Number DecalsWheels & Tires Part NO. noTractor - Model Number Liftassembly Tractor - Model Number Lift Assembly Mowerdeck Mower Deck Part NO. no Arm, Suspension, RearTractor - Model Number Hydro Gear Transaxle - Model Number Tractor - Model Number Hydro Gear Transaxle . Model Number KL=Y PAR Description61SA 392,32 Gasket SET KEY Part NO. no KEY Part Description263060 Page Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across HillPartsDirect sM

917.270961 specifications

The Craftsman 917.270961 is a remarkable lawn tractor designed for both efficiency and ease of use, making it an excellent choice for homeowners with medium to large yards. This powerful riding mower features a robust 19 horsepower Kohler engine, ensuring reliable performance and the capability to handle various terrains. With a 42-inch cutting deck, it provides a comfortable balance between maneuverability and cutting swath, making it suitable for a wide range of applications.

One of the standout features of the Craftsman 917.270961 is its automatic transmission. This technology allows for a smooth and seamless driving experience, enabling the operator to enjoy effortless control while mowing. With variable speed options, users can easily adjust the pace to suit their mowing style and the conditions of their yard, making it adaptable to various tasks.

The lawn tractor is equipped with a dual-blade system, ensuring a clean and even cut every time. This feature not only enhances the appearance of your lawn but also promotes healthy grass growth. Moreover, the deck is designed with an integrated washout port, facilitating easy cleaning after use and reducing the buildup of grass clippings.

Comfort is another priority in the design of the Craftsman 917.270961. The ergonomic seat is adjustable, allowing users of varying heights to find a comfortable position. The steering wheel is also designed for ease of handling, minimizing fatigue during longer mowing sessions.

For added convenience, this lawn tractor comes with an easy-to-read dashboard that displays essential information such as speed, fuel level, and engine temperature, keeping the user informed about the machine's performance at all times. Furthermore, the large-capacity fuel tank minimizes the need for frequent refueling, allowing for extended mowing sessions without interruptions.

Safety features are integrated throughout the Craftsman 917.270961, including an engine cutoff switch that activates when the operator leaves the seat. This ensures peace of mind while operating the mower, especially in landscapes with obstacles.

Overall, the Craftsman 917.270961 stands out as an efficient, comfortable, and versatile lawn tractor. With its solid engine performance, user-friendly design, and advanced mowing technologies, it is a reliable choice for homeowners aiming to maintain a pristine lawn with ease.
Top Page Image Contents