Craftsman 917.270961 manual Tires, Operator Presence System

Page 19

TRACTOR

Always .observe safety rules when pedormmg any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in

highestgear, then brake must be , adjusted. (See "TO ADJUST BRAKE" in

the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may

cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also

prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock

systems are working properly. If your tractor does not function as descrifSed,

repair the problem immediately.

•The engine should not start unless the

clutch/brake pedal is fully depressed and attachement clutch control is in

the disengaged position.

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine:

•The attachment clutch should never

operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be

kept sharp. Replace bent or damaged blades,

BLADE REMOVAL

•Raise mower to highest position to allow access to blades.

•Remove hex bolt, lock washer and flat washer secudng blade.

•Install new or resharpened blade with

trailing edge up towards deck as

shown.

IMPORTANT: To ensure proper assem- bly, center hole in blade must align with star on mandrel assembly.

•Reassemble hex bolt, lock washer and flat washer in exact order as shown.

•Tighten bolt securely (27-35 R. Lbs. torque).

IMPORTANT: Blade bolt is Grade 8 heal

treated.

Mandrel Assembly

Trailing Edge Up_ _/

Blade Center p_

Flat Washer_..._

Lock Washe,_"__ar

_--HexBolt (Grade)

*A Grade 8 heat treated bolt can be identified by six lines on the bolt head.

TO SHARPEN BLADE

NOTE: We do not recommend sharpen- ing blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and eventual damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions

supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded

portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

5/8" _n_BLa6e.

Center Hole _!

BATTERY

Your tractor has a battery charging

_/oStem which is sufficient for normal use. wever, periodic charging of the battery

with an automotive charger will extend its life.

•Keep battery and terminals clean.

Keep small vent holes open. Keep battery bolts tight.

19 Recharge at 6-10 amperes for 1 hour.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents £RAFTZMANo General Operation Parts Ordering Back CoverChildren ServiceSlope Operation Do notMachine. Tall grass can hide obsta- cles TIONI!! Become AWARE!!! Your Safety is InvolvedProduct Specifications Steering Wheel Attach Steering Wheel Before Removing Tractor From SkidTo Drive Tractor OFF Skid HOW to SET UP Your TractorCheck Battery Install SeatCheck for Proper Position of ALL Belts To Convert to Bagging or DischargingCheck Tire Pressure Check Deck LevelnessWhile Learning HOW to USE Youf All assembly instructions have been completedH L Knowyourtractor HOW to USE Your Tractor To Transport To Adjust Gauge WheelsTo Operate Mower To Operate on HillsBefore Starting the Enigne Check Engine OIL Level To Start EngineADD Gasoline Purge Transmission Mulching Mowing Tips Mowing TipsBefore Each USE Lubrication ChartMaintenance Schedule General RecommendationsOperator Presence System TiresClean AIR Screen TocleanbatteryandterminalsIN-LINE Fuel Filter Clean AIR INTAKE/COOUNG AreasTo Service PRE-CLEANER Spark PlugsTractor CleaningTo Install Mower To Level Mower HousingSIDE-TO-SIDE Adjustment To Level Mower HousingFRONT-TO-BACK Adjustment Belt Removal Belt InstallationTo Adjust Brake To Replace Mower Blade Drive BeltFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel AlignmentTransaxle Motion Control Lever Neutral Adjustment Transmission REMOVAL/REPLACE- MentInterlocks and Relays To Start Engine with a Weak BatteryReplacing Battery To Replace Headlight BulbTo Adjust Choke Control To Remove Hood and Grill AssemblyTo Adjust Carburetor To Adjust Throttle Control CableIdle Speed Lever =---,f \Idle Mixture Screw Engineoil Engine Fuel SystemCylinders OtherCorrection Troubleshooting ChartProblem CauseChart Cause ProblemCorrection Slow ProblemcauseTractor -. Model Number SchematicTractor - Model Number Electrical KEY Tractor - Model Number ElectricalTractor - Model Number Chassis and Enclosures IL=Y Part Desciiption Tractor - Model Number 917.270961 Chassisand EnclosuresTractor - Model Number Ground Drive KEY Part Description Tractor --MODEL Number Ground DriveTractor - Model Number 917.270961 Steering Assembly 12000029 Tractor --MODEL Number Steering AssemblyTractor - Model Number EngineOptional Equipment Engine Part Description Part KEY Part Description DESCRIP/1ON Tractor - Model Number Seat AssemblyPart NO. no Tractor --MODEL NumberDecals Wheels & TiresTractor - Model Number Liftassembly Tractor - Model Number Lift Assembly Mowerdeck Arm, Suspension, Rear Mower Deck Part NO. noTractor - Model Number Hydro Gear Transaxle - Model Number KL=Y PAR Description Tractor - Model Number Hydro Gear Transaxle . Model Number61SA 392,32 Gasket SET KEY Part Description KEY Part NO. no263060 Page Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationPartsDirect sM

917.270961 specifications

The Craftsman 917.270961 is a remarkable lawn tractor designed for both efficiency and ease of use, making it an excellent choice for homeowners with medium to large yards. This powerful riding mower features a robust 19 horsepower Kohler engine, ensuring reliable performance and the capability to handle various terrains. With a 42-inch cutting deck, it provides a comfortable balance between maneuverability and cutting swath, making it suitable for a wide range of applications.

One of the standout features of the Craftsman 917.270961 is its automatic transmission. This technology allows for a smooth and seamless driving experience, enabling the operator to enjoy effortless control while mowing. With variable speed options, users can easily adjust the pace to suit their mowing style and the conditions of their yard, making it adaptable to various tasks.

The lawn tractor is equipped with a dual-blade system, ensuring a clean and even cut every time. This feature not only enhances the appearance of your lawn but also promotes healthy grass growth. Moreover, the deck is designed with an integrated washout port, facilitating easy cleaning after use and reducing the buildup of grass clippings.

Comfort is another priority in the design of the Craftsman 917.270961. The ergonomic seat is adjustable, allowing users of varying heights to find a comfortable position. The steering wheel is also designed for ease of handling, minimizing fatigue during longer mowing sessions.

For added convenience, this lawn tractor comes with an easy-to-read dashboard that displays essential information such as speed, fuel level, and engine temperature, keeping the user informed about the machine's performance at all times. Furthermore, the large-capacity fuel tank minimizes the need for frequent refueling, allowing for extended mowing sessions without interruptions.

Safety features are integrated throughout the Craftsman 917.270961, including an engine cutoff switch that activates when the operator leaves the seat. This ensures peace of mind while operating the mower, especially in landscapes with obstacles.

Overall, the Craftsman 917.270961 stands out as an efficient, comfortable, and versatile lawn tractor. With its solid engine performance, user-friendly design, and advanced mowing technologies, it is a reliable choice for homeowners aiming to maintain a pristine lawn with ease.
Top Page Image Contents