Craftsman 917.270961 manual Clean AIR INTAKE/COOUNG Areas, To Service PRE-CLEANER, Spark Plugs

Page 21

overheating. Cleanwith a wire brush or compressedair to removedirt and stubborndriedgum fibers.

CLEAN AIR INTAKE/COOUNG AREAS

To insure proper cooling, make sure the grass screen, cooling fins, and other

extemal surfaces of the engine are kept clean at all times.

Every 100 hours of operation (mol'e often under extremely dusty, dirty conditions), remove the blower housing and other - cooling shrouds. Clean the cooling fins and external surfaces as necessary. Make sure the cooling shrouds are reinstalled.

NOTE: Operating the engine with a blocked grass screen, .dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating.

AIR FILTER

Your engine will not run propedy using a dirty air filler. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

•Remove knob(s) and cover.

TO SERVICE PRE-CLEANER

•Slide foam pre-cleaner off cartridge.

•Wash llin liquid detergent and water.

•Squeeze it dry in a clean cloth.

•Saturate it in engine oil, Wrap it in clean, absorbent cloth and squeeze to remove excess oil,

•ff very dirty or damaged, replace pre- cleaner.

•Reinstall pre-cleaner over cartridge.

•Reinstall cover and secure with knob(s).

TO SERVICE CARTRIDGE

•Remove wing nuts and cartddge plate.

•Carefully remove cartddge to prevent debris from entering carburetor.

•Clean cartridge by tapping gently on flat surface. If very dirty or damaged,

replace carfddge.

*Reinstall cartridge plate, wing nuts, precleaner, cover and secure with

knob(s).

IMPORTANT" Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deteriora-

tion ofthe cadddge. Do not oil cadddge. Do not use pressudzedairtodeanor

dry cadddge.

Cover

Wing

Plate

Foam Pre-

Air Screen

MUFFLER

Inspect and replace corroded muffler

and spark arrester (if equipped) as it Could create a fire hazard and/or

damage.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs

first. Spark plug type and gap setting am shown in =PRODUCT SPECIFICATIONS"

section of this manual.

IN-LINE FUEL FILTER

The fuel filter should be replaced once each season. If fuel filter becomes

clogged, obstructing fuel flow to carbure- tor, replacement is required.

•With engine cool, remove filter and plug fuel line sections,

•Place new fuel filler in position in fuel line with arrow pointing towards carburetor.

•Be sure there are no fuel line leaks and clamps are propedy positioned.

•Immediately wipe up any spilled gasoline.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents £RAFTZMANo General Operation Parts Ordering Back CoverSlope Operation ServiceDo not ChildrenMachine. Tall grass can hide obsta- cles TIONI!! Become AWARE!!! Your Safety is InvolvedProduct Specifications Steering Wheel Attach Steering Wheel Before Removing Tractor From SkidCheck Battery HOW to SET UP Your TractorInstall Seat To Drive Tractor OFF SkidCheck Tire Pressure To Convert to Bagging or DischargingCheck Deck Levelness Check for Proper Position of ALL BeltsWhile Learning HOW to USE Youf All assembly instructions have been completedH L Knowyourtractor HOW to USE Your Tractor To Operate Mower To Adjust Gauge WheelsTo Operate on Hills To TransportTo Start Engine Before Starting the Enigne Check Engine OIL LevelADD Gasoline Purge Transmission Mulching Mowing Tips Mowing TipsMaintenance Schedule Lubrication ChartGeneral Recommendations Before Each USEOperator Presence System TiresClean AIR Screen TocleanbatteryandterminalsTo Service PRE-CLEANER Clean AIR INTAKE/COOUNG AreasSpark Plugs IN-LINE Fuel FilterTo Install Mower CleaningTo Level Mower Housing TractorTo Level Mower Housing SIDE-TO-SIDE AdjustmentFRONT-TO-BACK Adjustment To Adjust Brake Belt InstallationTo Replace Mower Blade Drive Belt Belt RemovalTransaxle Motion Control Lever Neutral Adjustment To Adjust Steering Wheel AlignmentTransmission REMOVAL/REPLACE- Ment Front Wheel TOE-IN/CAMBERReplacing Battery To Start Engine with a Weak BatteryTo Replace Headlight Bulb Interlocks and RelaysTo Adjust Carburetor To Remove Hood and Grill AssemblyTo Adjust Throttle Control Cable To Adjust Choke ControlIdle Speed Lever =---,f \Idle Mixture Screw Cylinders Engine Fuel SystemOther EngineoilProblem Troubleshooting ChartCause CorrectionProblem Chart CauseCorrection Slow ProblemcauseTractor -. Model Number SchematicTractor - Model Number Electrical KEY Tractor - Model Number ElectricalTractor - Model Number Chassis and Enclosures IL=Y Part Desciiption Tractor - Model Number 917.270961 Chassisand EnclosuresTractor - Model Number Ground Drive KEY Part Description Tractor --MODEL Number Ground DriveTractor - Model Number 917.270961 Steering Assembly 12000029 Tractor --MODEL Number Steering AssemblyEngine Tractor - Model NumberOptional Equipment Engine Part Description Part KEY Part Description DESCRIP/1ON Tractor - Model Number Seat AssemblyDecals Tractor --MODEL NumberWheels & Tires Part NO. noTractor - Model Number Liftassembly Tractor - Model Number Lift Assembly Mowerdeck Arm, Suspension, Rear Mower Deck Part NO. noTractor - Model Number Hydro Gear Transaxle - Model Number KL=Y PAR Description Tractor - Model Number Hydro Gear Transaxle . Model Number61SA 392,32 Gasket SET KEY Part Description KEY Part NO. no263060 Page Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationPartsDirect sM

917.270961 specifications

The Craftsman 917.270961 is a remarkable lawn tractor designed for both efficiency and ease of use, making it an excellent choice for homeowners with medium to large yards. This powerful riding mower features a robust 19 horsepower Kohler engine, ensuring reliable performance and the capability to handle various terrains. With a 42-inch cutting deck, it provides a comfortable balance between maneuverability and cutting swath, making it suitable for a wide range of applications.

One of the standout features of the Craftsman 917.270961 is its automatic transmission. This technology allows for a smooth and seamless driving experience, enabling the operator to enjoy effortless control while mowing. With variable speed options, users can easily adjust the pace to suit their mowing style and the conditions of their yard, making it adaptable to various tasks.

The lawn tractor is equipped with a dual-blade system, ensuring a clean and even cut every time. This feature not only enhances the appearance of your lawn but also promotes healthy grass growth. Moreover, the deck is designed with an integrated washout port, facilitating easy cleaning after use and reducing the buildup of grass clippings.

Comfort is another priority in the design of the Craftsman 917.270961. The ergonomic seat is adjustable, allowing users of varying heights to find a comfortable position. The steering wheel is also designed for ease of handling, minimizing fatigue during longer mowing sessions.

For added convenience, this lawn tractor comes with an easy-to-read dashboard that displays essential information such as speed, fuel level, and engine temperature, keeping the user informed about the machine's performance at all times. Furthermore, the large-capacity fuel tank minimizes the need for frequent refueling, allowing for extended mowing sessions without interruptions.

Safety features are integrated throughout the Craftsman 917.270961, including an engine cutoff switch that activates when the operator leaves the seat. This ensures peace of mind while operating the mower, especially in landscapes with obstacles.

Overall, the Craftsman 917.270961 stands out as an efficient, comfortable, and versatile lawn tractor. With its solid engine performance, user-friendly design, and advanced mowing technologies, it is a reliable choice for homeowners aiming to maintain a pristine lawn with ease.
Top Page Image Contents