To Operate Mower, To Adjust Gauge Wheels

Craftsman 917.270961 To Operate Mower, To Adjust Gauge Wheels, To Operate on Hills, To Transport

The cutting height range is approxi- mately 1-1/2" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut

relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper

position to help prevent scalping in most terrain conditions.

•Adjust gauge wheels with tractor on a fiat level surface.

•Adjust mower to desired cutting height (See TO ADJUST MOWER CUTTING

HEIGHT" in the Operation section of this manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole with shoulder bolt, 3/ 8 washer, and 3/8-16 Iocknut and tighten securely.

•Repeat for opposite side installing gauge wheel in same adjustment hole.

3/8-16
Locknut_
Gauge
Wheel
Mounting
Bracket
	3houlder
Gauge Wheel	Bolt

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

•Select desired height of cut.

•Lower mower with attachment lift control.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disen-

gage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield place.

Attachment Clutch Lever "Engaged"

PositionLift

Lever High

Position

,':_:'_ Low

Position

Shield

TO OPERATE ON HILLS

_CAUTION: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to

brake position and engage parking brake.

•Move motion control lever to neutral

(N) position.

IMPORTANT: The motion control lever does not return to neutral (N) position when the clutch/brake pedal is de- pressed.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Slowly move motion control lever to slowest setting.

•Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheel- ing position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attachment lift control.

917.270961 specifications

The Craftsman 917.270961 is a remarkable lawn tractor designed for both efficiency and ease of use, making it an excellent choice for homeowners with medium to large yards. This powerful riding mower features a robust 19 horsepower Kohler engine, ensuring reliable performance and the capability to handle various terrains. With a 42-inch cutting deck, it provides a comfortable balance between maneuverability and cutting swath, making it suitable for a wide range of applications.

One of the standout features of the Craftsman 917.270961 is its automatic transmission. This technology allows for a smooth and seamless driving experience, enabling the operator to enjoy effortless control while mowing. With variable speed options, users can easily adjust the pace to suit their mowing style and the conditions of their yard, making it adaptable to various tasks.

The lawn tractor is equipped with a dual-blade system, ensuring a clean and even cut every time. This feature not only enhances the appearance of your lawn but also promotes healthy grass growth. Moreover, the deck is designed with an integrated washout port, facilitating easy cleaning after use and reducing the buildup of grass clippings.

Comfort is another priority in the design of the Craftsman 917.270961. The ergonomic seat is adjustable, allowing users of varying heights to find a comfortable position. The steering wheel is also designed for ease of handling, minimizing fatigue during longer mowing sessions.

For added convenience, this lawn tractor comes with an easy-to-read dashboard that displays essential information such as speed, fuel level, and engine temperature, keeping the user informed about the machine's performance at all times. Furthermore, the large-capacity fuel tank minimizes the need for frequent refueling, allowing for extended mowing sessions without interruptions.

Safety features are integrated throughout the Craftsman 917.270961, including an engine cutoff switch that activates when the operator leaves the seat. This ensures peace of mind while operating the mower, especially in landscapes with obstacles.

Overall, the Craftsman 917.270961 stands out as an efficient, comfortable, and versatile lawn tractor. With its solid engine performance, user-friendly design, and advanced mowing technologies, it is a reliable choice for homeowners aiming to maintain a pristine lawn with ease.