Craftsman 917.270961 Cleaning, Tractor, To Remove Mower, To Install Mower, To Level Mower Housing

Page 22

CLEANING

iClean engine, battery, seat finish etc.

°f all f° reign mauttrr"h is Keep fin'shed s aces and wee

free of all gasoline, oil, etc.

Protect painted surfaces with automo- tive type wax.

We do not recommend using a garden hose to clean your tractor unless the electrical system, muffler, air filter and

carburetor are covered to keep water out. Water in engine can result in a short- ened engine life.

,& CAUTION:

Before performing any service or adjustments:

Depress clutch/brake pedal fully and set parking brake.

Place motion control lever in neutral (N) position.

Place attachment clutch in "DISENGAGED" position.

Turn ignition key =OFF" and remove key.

Make sure the blades and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the right side of tractor.

Piece attachment clutch in =DISEN-

GAGED" position.

Move attachment lift lever forward to lower mower to its lowest position.

Roll belt off engine pulley.

Remove small retainer spring, and lift

clutch spdng off pulley bolt.

Remove large retainer spring, slide collar off and push housing guide out of bracket.

Disconnect anti-swaybar from chassis bracket by removing retainer spring.

Disconnect suspension arms from rear deck brackets by removing retainer

springs.

Disconnect front links from deck by

removing retainer springs.

Raise lift lever to raise suspension arms. Slide mower out from under tractor.

Small Retainer Spring

Retainer

Anti-Swa'

IMPORTANT: If an attachment other than the mower deck is to be mounted onthe tractor, remove the front links and hook

the clutch spring into square hole in frame.

TO INSTALL MOWER

Raise attachment lift lever to its highes

position.

Slide mower under tractor with dis-

charge guard to right side of tractor.

Lower lift lever to its lowest position.

Install mower in reverse order of

removal instructions.

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure

tires are properly inflated (See =PROD-

UCT SPECIFICATIONS" section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

Arms ._;_',._._.-_Square Hole

ine Pulley

Link

Sides)

Housing

Large Retainer

Spring22

Image 22
Contents £RAFTZMANo Parts Ordering Back Cover General OperationDo not ServiceSlope Operation ChildrenTIONI!! Become AWARE!!! Your Safety is Involved Machine. Tall grass can hide obsta- clesProduct Specifications Steering Wheel Before Removing Tractor From Skid Attach Steering WheelInstall Seat HOW to SET UP Your TractorCheck Battery To Drive Tractor OFF SkidCheck Deck Levelness To Convert to Bagging or DischargingCheck Tire Pressure Check for Proper Position of ALL BeltsAll assembly instructions have been completed While Learning HOW to USE YoufH L Knowyourtractor HOW to USE Your Tractor To Operate on Hills To Adjust Gauge WheelsTo Operate Mower To TransportBefore Starting the Enigne Check Engine OIL Level To Start EngineADD Gasoline Purge Transmission Mowing Tips Mulching Mowing TipsGeneral Recommendations Lubrication ChartMaintenance Schedule Before Each USETires Operator Presence SystemTocleanbatteryandterminals Clean AIR ScreenSpark Plugs Clean AIR INTAKE/COOUNG AreasTo Service PRE-CLEANER IN-LINE Fuel FilterTo Level Mower Housing CleaningTo Install Mower TractorSIDE-TO-SIDE Adjustment To Level Mower HousingFRONT-TO-BACK Adjustment To Replace Mower Blade Drive Belt Belt InstallationTo Adjust Brake Belt RemovalTransmission REMOVAL/REPLACE- Ment To Adjust Steering Wheel AlignmentTransaxle Motion Control Lever Neutral Adjustment Front Wheel TOE-IN/CAMBERTo Replace Headlight Bulb To Start Engine with a Weak BatteryReplacing Battery Interlocks and RelaysTo Adjust Throttle Control Cable To Remove Hood and Grill AssemblyTo Adjust Carburetor To Adjust Choke ControlIdle Speed Lever =---,f \Idle Mixture Screw Other Engine Fuel SystemCylinders EngineoilCause Troubleshooting ChartProblem CorrectionChart Cause ProblemCorrection Problemcause SlowSchematic Tractor -. Model NumberTractor - Model Number Electrical Tractor - Model Number Electrical KEYTractor - Model Number Chassis and Enclosures Tractor - Model Number 917.270961 Chassisand Enclosures IL=Y Part DesciiptionTractor - Model Number Ground Drive Tractor --MODEL Number Ground Drive KEY Part DescriptionTractor - Model Number 917.270961 Steering Assembly Tractor --MODEL Number Steering Assembly 12000029Tractor - Model Number EngineOptional Equipment Engine Part Description Tractor - Model Number Seat Assembly Part KEY Part Description DESCRIP/1ONWheels & Tires Tractor --MODEL NumberDecals Part NO. noTractor - Model Number Liftassembly Tractor - Model Number Lift Assembly Mowerdeck Mower Deck Part NO. no Arm, Suspension, RearTractor - Model Number Hydro Gear Transaxle - Model Number Tractor - Model Number Hydro Gear Transaxle . Model Number KL=Y PAR Description61SA 392,32 Gasket SET KEY Part NO. no KEY Part Description263060 Page Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across HillPartsDirect sM

917.270961 specifications

The Craftsman 917.270961 is a remarkable lawn tractor designed for both efficiency and ease of use, making it an excellent choice for homeowners with medium to large yards. This powerful riding mower features a robust 19 horsepower Kohler engine, ensuring reliable performance and the capability to handle various terrains. With a 42-inch cutting deck, it provides a comfortable balance between maneuverability and cutting swath, making it suitable for a wide range of applications.

One of the standout features of the Craftsman 917.270961 is its automatic transmission. This technology allows for a smooth and seamless driving experience, enabling the operator to enjoy effortless control while mowing. With variable speed options, users can easily adjust the pace to suit their mowing style and the conditions of their yard, making it adaptable to various tasks.

The lawn tractor is equipped with a dual-blade system, ensuring a clean and even cut every time. This feature not only enhances the appearance of your lawn but also promotes healthy grass growth. Moreover, the deck is designed with an integrated washout port, facilitating easy cleaning after use and reducing the buildup of grass clippings.

Comfort is another priority in the design of the Craftsman 917.270961. The ergonomic seat is adjustable, allowing users of varying heights to find a comfortable position. The steering wheel is also designed for ease of handling, minimizing fatigue during longer mowing sessions.

For added convenience, this lawn tractor comes with an easy-to-read dashboard that displays essential information such as speed, fuel level, and engine temperature, keeping the user informed about the machine's performance at all times. Furthermore, the large-capacity fuel tank minimizes the need for frequent refueling, allowing for extended mowing sessions without interruptions.

Safety features are integrated throughout the Craftsman 917.270961, including an engine cutoff switch that activates when the operator leaves the seat. This ensures peace of mind while operating the mower, especially in landscapes with obstacles.

Overall, the Craftsman 917.270961 stands out as an efficient, comfortable, and versatile lawn tractor. With its solid engine performance, user-friendly design, and advanced mowing technologies, it is a reliable choice for homeowners aiming to maintain a pristine lawn with ease.