•To attachthe bag, placethe openingof the bag overthechutedeflectorsoit completelycoversthe chuteopening.Depressthe plungeron thedraw-
string,andpullon thedrawstringuntilthe bagis tightaroundthechuteopeningReleaseplungerto.
lockitintopositionSeefigure5. .
OPERATION
KNOW YOUR CHIPPER-SHREDDER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHIPPER-SHREDDER. Compare the illustrations with your chipper-shredder to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
| | | Fuel | |
| | Spark Plug, | Fill | Oil Fill and |
Hopper Assembly | Chipper | Wire and _ | Cap | Dipstick |
| Boot | | |
| Chute | | |
| | | |
I
Throttle
Control
Front of
Starter Chipper-
Handle Shredder
FIGURE 6.
MEETS ANSI SAFETYSTANDARDS
Sears chipper-shredders conform to the safety standard B71.6-1982 of the American National Standards Institute.
OPERATINGCONTROLS
RELEASE BAR--Used to release the hopper when raising or lowering. See figure 10.
PRIMER--Pumps additional fuel from the carburetor to the cylinder for use when starting a cold engine. See figure 14.
STARTER HANDLE--Used to manually start the
engine. See figure 6.
THROTTLE CONTROL--Permits selection of fast or
slow engine speed, and is used to stop the engine. See figure 6.
BEFORE USING YOUR CHIPPER-SHREDDER, AGAIN REFER TO THE "SAFETY RULES" AS SHOWN ON PAGE 2 OF THIS MANUAL. ALWAYS BE CAREFUL.
The operation of any chipper-shredder can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear the safety glasses provided with the chipper-shredder or eye shields before chipping or shredding, or while performing any adjustments or repairs. We recommend
Wide Vision Safety Mask for over spectacles or standard glasses available at Sears Retail or Catalog Stores.
