Craftsman 358.351080 Before Starting Engine, Gasoline and OIL Mixture, Fuel Mixture Chart

Page 10

. JP

OPERATION

BEFORE STARTING ENGINE

FUEL STABILIZER

WARNING:

BE SURE TO READ THE FUEL HANDLING

INFORMATION IN THE SAFETY RULES SECTION ON PAGE 2 OF THIS MANUAL BEFORE YOU BEGIN.

IF YOU DO NOT UNDERSTAND THE FUEL HANDLING SECTION DO NOT ATTEMPT TO FUEL YOUR UNIT; SEEK HELP FROM SOMEONETHAT DOES UNDERSTAND THE FUEL HANDLING SECTION OR CALL THE CUSTOMER ASSISTANCE HOTLINE AT 1-800-235-5878,

Fuel stabilizeris an acceptablea.ltemativein minimizingthe formation of fuel gum depositsduringstorage.Add stabiliz-

er to gasoline in fuel tank or storage container. Always fol- towthe fuel mix ratiofound on the stabilizercontainer. Run

engine at teast5 minutes afteradding stabilizerto allow the stabilizerto reach the carburetorYou. do not have to drain

the fuel tankfor storageifyou are using fuel stabilizer.

CRAFTSMAN 40:1 2-cycle engine oil (AIR-COOLED) is specially blended w_ fuel stabilizersIf. you do not use this Sears oil, you can add a fuel stabilizer to your fuel tank.

40:1 2-CYCLE AIR-COOLED ENGINE OIL

GUIDE BAR AND CHAIN OIL

For maximum guide bar and chain life,we recommendyou use Craftsman chain saw bar oil. if Craftsmanbar oil is not

available, you may use a goodgrade SAE30 oiluntilyou are able to obtain Craftsman brand,The oi! outputis automati- cally metered during operation.Your saw will use approxi- mately one tank of bar oil for everytank of fuel mix. Always fill the bar oil tank when you fill the fuel tank.

GASOLINE

The two-cycle engine on thisproductrequiresa fuel mixture of regular unleeded gasoline and a quality 40:1 2-cycle engine oi! (AIR-COOLED) for lubricationof the bear- ings and other moving parts.The correctfuel/oil mixture is 40:1 (see Fuel Mixture Chart).Too littleoilorthe incorrectoil

type will cause poor performanceand may causethe engine to overheat and seize.

Gasoline and oll must be premixed in a clean approvedfuel container.Always use fresh regularunleadedgasoline.

This engine is certified to operateon unleadedgasoline.

IMPORTANT: Experience indicates that alcohol blended fuels called gasohol (or using ethanol or methanol) can attract moisture, which leads to oil/gasseparation and for- marion of acids during storage.Acidicgas can damage the fuel system of an engine while in storage.To avoid engine

problems, the fuel system shouldbe emptiedbefore storage

£:=?_for 30 days or longer, Drain the gas tank, then run the fuel out of the carburetor and fuel lines by starting the engine and letting it run until it stops. Use fresh fuel next season. See STORAGE instructionsfor additionalinformation.Never

use engine or carburetor cleaner productsin the fuel tank or permanent damage may occur.

CRAFTSMAN 40:1 2-cycle engine oil (AIR-COOLED)is stronglyrecommended.This oil is specificallyblended with fuel stabilizersfor increased fuel stability (extends fuel I_fe up to 5 times longer) and reduced smoke.

If CRAFTSMAN 40:1 2-cycleengi_neoil (AIR-COOLED).is not avellabie, use a good quality 2-cycle engine oil (AIR- COOLED) that has a recommended fuel mix ratio of 40:1.

IMPORTANT! Do not use:

•AUTOMOTIVE OIL

•BOAT OILS (NMMA, BIA, etc.)

These oils do not have proper additives for 2-cycle (AIR-COOLED) engines and can cause engine damage.

GASOLINE AND OIL MIXTURE

•MIX GASOLINE AND OIL AS FOLLOWS:

•Consultchart for correctquantities.

•Do not mix gasolineand oil directlyin the unit'sfuel tank,

FOR ONE GALLON:

•Pour 3,2 ounces of high quality,40:1 2-cycle engine oil (AIR-COOLED) into an empty, approved one gallon gasolinecontainer.

•Add one gallon of regular unleaded gasoline to the gallon container,then securelyreplace the cap.

•Shake the corttainet'momentadly.

•The mixture is now ready for use. Fuel stabilizer can be added at this time if desired;follow mixing instructionson the label+

FUEL MIXTURE CHART

40:1 Fuel:Oil Mix Ratio

I

_

Oil (fLoz.I

 

2.51 gallons

83.02

NOTE: Fuel containers may hold more than the specified amount. If too much gasolineis in the container, the result- ing gas-to-oil fuel mixture will not be correct for proper engine operation.

-10-

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Lk Warning 358.351080-18 358.351160-16Hours CST Result in Serious InjuryPlan Ahead NightKnow Your SAW Fuel HandlingTransporting and Storage KickbackReduce the Chance of Kickback Safety RulesKickback Safety Features Understanding Reactwe ForcesCustomer Responsibilities Full ONE Year Warranty on Craftsman GAS Chain SAWSPECIAL Notice Table of Contents IndexCarton Contents Chain Travel OperationDirection Chain Oiler Fig Howto USE Your Chain SAWTHROnLE Control Group Fig 401 2-CYCLE AIR-COOLED Engine OIL Guide BAR and Chain OIL Fuel Mixture ChartBefore Starting Engine GasolineFull Starting a Warm EngineDifficult sTARTlinG or Flooded Engine Right Foot through Opening in Rear HandleTo Avoid PINCH-KICKBACK Avoid Reactive Pinch ForcesGeneral Operation Tips To Avoid PULL-INFelling Tips Tree FellingDetermine the Natural Fall Direction OHAMMER to Force the Felling CUT PEN. the Wedge will HoldOperation Safety Felling SafetyTypes of Cutting Fig Bucking SafetyBucking Bucking on the Ground FigPruning and Limbing Tips Pruning and LimbingPruning Fig Never Cumb Into a Tree Tolimb orCheck for Damaged or Worn Parts Maintenance ScheduleBefore USE Check for Loose Fasteners and PartsSharpening CHAIFure20 Customer ResponsibilitiesCrrftsmrn Chain GaugeHolder File HolderInside Side PlateEvery 25 Hours Clean Unit and LabelsAfter USE YearlyFuel Line Barrel Chnn Adjustment , 41,42 & do43not Service and AdjustmentsBar Clamp Nuts NutsScrew Tool Starter Rope Replacement , 45, 46, 47Housing Starter Rope Fan Housin PulleyRewind for Idle Speed Adjustment Mixture Carburetor AdjustmentsIdle Speed Adjustment is marked with the letter T LOW Speed Mixture ADJUflTMEAfter completing adjustments, check for acceleration Adjusting Procedure Idle Speed Adjustment TLOW Speed Mixture Adjustment L Acceleration CheckFuel System StorageGAS Chain SAW Storage Instructions Internal EngineTrouble Shooting Points Trouble Shooting Chart Symptom Cause CorrectionAssy Repair PartsBarAdjungKit LargeDaGrner S30-037733 Foam-Nr FilterClp UmirCo-.owRepair Parts Customer Assistance Ifyou Need Repair Service or PartsRepair Service 1-800-4-REPAIR 358.351080 358.351160 358.351180

358.351080 specifications

The Craftsman 358.351080 is a versatile and reliable gas-powered string trimmer designed for both residential and light commercial use. This trimmer is particularly beloved for its robust performance and user-friendly features, making it an essential tool for maintaining a well-kept lawn or garden.

One of the standout characteristics of the Craftsman 358.351080 is its powerful 32cc, 2-cycle engine. This engine provides ample power to tackle tough weeds, thick grass, and even small brush. Despite its strength, the engine is designed to be fuel-efficient, which translates to longer operating times and fewer fuel refills. The use of a 2-cycle engine means that users will need to mix oil with the gasoline, but this also provides a lightweight and compact design that makes handling easier.

A key feature of the Craftsman 358.351080 is its easy-to-use starting system. This trimmer incorporates an ergonomically designed starting mechanism that aids in quick and effortless ignition, reducing the frustration often associated with starting gas-powered tools. The inclusion of an automatic choke system further enhances this ease of use, ensuring that the engine runs smoothly from the first pull.

The Craftsman 358.351080 also boasts a generous cutting swath of 17 inches. This large cutting diameter allows for efficient trimming, significantly reducing the time it takes to complete lawn maintenance tasks. Additionally, the trimmer is equipped with a dual line bump head which allows for easy line advancement; users can simply tap the head on the ground to release more cutting line when needed.

Comfort is another important aspect of the Craftsman 358.351080. The trimmer features a comfortable, adjustable handle that can be tailored to suit the user’s height and grip preferences. This not only ensures better control while trimming but also helps reduce fatigue during prolonged use. Furthermore, the lightweight design of the trimmer allows for easy maneuverability, making it suitable for various garden types and terrains.

Safety features are also integrated into the design of the Craftsman 358.351080, with protective equipment and safety switches to prevent accidental starts. This commitment to user safety makes it an excellent choice for inexperienced users or those looking to operate the trimmer for extended periods.

In summary, the Craftsman 358.351080 string trimmer is a powerful, efficient, and user-friendly tool. With its impressive engine performance, generous cutting swath, and focus on user comfort and safety, it is well-suited for a variety of landscaping tasks. Whether you are a homeowner or a light commercial operator, this trimmer delivers the reliability and effectiveness needed to keep your outdoor spaces pristine.
Top Page Image Contents