Craftsman 358.351080 Adjusting Procedure Idle Speed Adjustment T, LOW Speed Mixture Adjustment L

Page 26

-.;

SERVICE AND ADJUSTMENTS

:iz-.!

"_':zt2

ADJUSTING PROCEDURE

IDLE SPEED ADJUSTMENT "T"

•Allow the warm engine to idle.

•Adjust the Idte Speed until the engine continuesto run withoutstallingand withoutthe chain moving,

-Turn clockwise to increase engine speed ff engine stalls or dies.

-Turn countemlockwiseto slow engine down and!or to keep the chain from turning.

•No further adjustments are necessary if chain does not move at idle speed and ff performance is satisfactory.

LOW SPEED MIXTURE ADJUSTMENT "L"

•Allow engine to idle.

•Turn the Low Speed Mixture Adjustment slowly clock- wise until the RPM starts to drop.Note the position.

•Turn the Low Speed Mixture Adjustmentslowlycounter- clockwise until the RPM speeds up and starts to drop again, Note the position.

°Set the Low Speed Mixture at the midpoint between the two positions.

HIGH SPEED MIXTURE ADJUSTMENT "H"

IMPORTANT: DO NOT OPERATE ENGINE AT FULL

THRO]-TLE FOR PROLONGED PERIODS WHILE MAK-

ING HIGH SPEED ADJUSTMENTS AS DAMAGE TO THE ENGINE CAN OCCUR.

°Make a test cut.

•Based on performance of the saw while cutting, adjust the high speed mixture in 1/16 turn increments as fol-

lows:

- ClOse ff saw loses power in the cut. Do not adjust

for best power by sound or speed, but #Jdge by how well the saw performs in the cut.

-Counterclockwise if the saw has speed while out of the cut, but dies in the cut or lacks power while cutting.

°Repeat the test cut.

•Continue with 1/16 turn adjustments until the saw perfor- mance is acceptable while cutting.

•After completing adjustments, check for acceleration.

ACCELERATION CHECK

•If the engine dies or hesitates instead of accelerating, turnthe Low Speed Mixture Adjustment 1/16 of a turn at a time counterclockwiseuntil you have smooth accelera-

tion.

° Check the idle speed for stability and no chain move- ment. Adjust as necessary.

•Recheck for smooth acceleration and stable idle. Repeat process as necessary for acceptable performance.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Lk Warning 358.351080-18 358.351160-16Hours CST Result in Serious InjuryPlan Ahead NightKnow Your SAW Fuel HandlingTransporting and Storage KickbackReduce the Chance of Kickback Safety RulesKickback Safety Features Understanding Reactwe ForcesSPECIAL Notice Full ONE Year Warranty on Craftsman GAS Chain SAWCustomer Responsibilities Table of Contents IndexCarton Contents Direction OperationChain Travel THROnLE Control Group Fig Howto USE Your Chain SAWChain Oiler Fig 401 2-CYCLE AIR-COOLED Engine OIL Guide BAR and Chain OIL Fuel Mixture ChartBefore Starting Engine GasolineFull Starting a Warm EngineDifficult sTARTlinG or Flooded Engine Right Foot through Opening in Rear HandleTo Avoid PINCH-KICKBACK Avoid Reactive Pinch ForcesGeneral Operation Tips To Avoid PULL-INFelling Tips Tree FellingDetermine the Natural Fall Direction OHAMMER to Force the Felling CUT PEN. the Wedge will HoldOperation Safety Felling SafetyTypes of Cutting Fig Bucking SafetyBucking Bucking on the Ground FigPruning and Limbing Tips Pruning and LimbingPruning Fig Never Cumb Into a Tree Tolimb orCheck for Damaged or Worn Parts Maintenance ScheduleBefore USE Check for Loose Fasteners and PartsSharpening CHAIFure20 Customer ResponsibilitiesCrrftsmrn Chain GaugeHolder File HolderInside Side PlateEvery 25 Hours Clean Unit and LabelsAfter USE YearlyFuel Line Barrel Bar Clamp Nuts Service and AdjustmentsChnn Adjustment , 41,42 & do43not NutsScrew Tool Starter Rope Replacement , 45, 46, 47Housing Starter Rope Fan Housin PulleyRewind for Idle Speed Adjustment Mixture Carburetor AdjustmentsIdle Speed Adjustment is marked with the letter T LOW Speed Mixture ADJUflTMEAfter completing adjustments, check for acceleration Adjusting Procedure Idle Speed Adjustment TLOW Speed Mixture Adjustment L Acceleration CheckFuel System StorageGAS Chain SAW Storage Instructions Internal EngineTrouble Shooting Points Trouble Shooting Chart Symptom Cause CorrectionAssy Repair PartsBarAdjungKit LargeDaGrner S30-037733 Foam-Nr FilterClp UmirCo-.owRepair Parts Customer Assistance Ifyou Need Repair Service or PartsRepair Service 1-800-4-REPAIR 358.351080 358.351160 358.351180

358.351080 specifications

The Craftsman 358.351080 is a versatile and reliable gas-powered string trimmer designed for both residential and light commercial use. This trimmer is particularly beloved for its robust performance and user-friendly features, making it an essential tool for maintaining a well-kept lawn or garden.

One of the standout characteristics of the Craftsman 358.351080 is its powerful 32cc, 2-cycle engine. This engine provides ample power to tackle tough weeds, thick grass, and even small brush. Despite its strength, the engine is designed to be fuel-efficient, which translates to longer operating times and fewer fuel refills. The use of a 2-cycle engine means that users will need to mix oil with the gasoline, but this also provides a lightweight and compact design that makes handling easier.

A key feature of the Craftsman 358.351080 is its easy-to-use starting system. This trimmer incorporates an ergonomically designed starting mechanism that aids in quick and effortless ignition, reducing the frustration often associated with starting gas-powered tools. The inclusion of an automatic choke system further enhances this ease of use, ensuring that the engine runs smoothly from the first pull.

The Craftsman 358.351080 also boasts a generous cutting swath of 17 inches. This large cutting diameter allows for efficient trimming, significantly reducing the time it takes to complete lawn maintenance tasks. Additionally, the trimmer is equipped with a dual line bump head which allows for easy line advancement; users can simply tap the head on the ground to release more cutting line when needed.

Comfort is another important aspect of the Craftsman 358.351080. The trimmer features a comfortable, adjustable handle that can be tailored to suit the user’s height and grip preferences. This not only ensures better control while trimming but also helps reduce fatigue during prolonged use. Furthermore, the lightweight design of the trimmer allows for easy maneuverability, making it suitable for various garden types and terrains.

Safety features are also integrated into the design of the Craftsman 358.351080, with protective equipment and safety switches to prevent accidental starts. This commitment to user safety makes it an excellent choice for inexperienced users or those looking to operate the trimmer for extended periods.

In summary, the Craftsman 358.351080 string trimmer is a powerful, efficient, and user-friendly tool. With its impressive engine performance, generous cutting swath, and focus on user comfort and safety, it is well-suited for a variety of landscaping tasks. Whether you are a homeowner or a light commercial operator, this trimmer delivers the reliability and effectiveness needed to keep your outdoor spaces pristine.
Top Page Image Contents