Craftsman 358.351080 manual Transporting and Storage, Kickback

Page 3

,-.

SAFETY RULES

OPERATE YOUR SAW SAFELY

•Do not operate a chain saw with one hand. Serious

injuryto the operator, helpers,bystandersor any combina- tionof these persons may resultfrom one-handedopera- tion.A chain saw is intendedfor two-handeduse.

•Operate the chain saw only in well-ventilated outdoor areas.

•Do not operate saw from a ladder or in a tree, unless specificallytrained to do so.

•Position all parts of your body to the left of cut and away from the chain when the engine is running.

•Cut wood only. Do not use your saw to pry or shoveaway limbs,roots, or other objects.

•Make sure the chain will not make contact with any object while starting the engine, Never try to start the saw when the guide bar is in a cut or kerr.

•Use extreme caution when cutting small size brush and saplings. Slender materialcan catch the chain and be whipped toward you or pull you off balance.

•Be alert for springback when cuttinga limbthat is under

tensionso you will not be struck by the limb or saw when the tension in the wood fibers is released.

•Do not put pressure on the saw at the end of a cut.

Applyingpressure can cause you to lose controlwhen the cutis completed.

•Stop.the engine before setting the saw down.

•Keep fuel and oil caps, screws, and fasteners securely tightened.

MAINTAIN YOUR SAW IN GOOD WORKING ORDER

•Have all chain saw service performed by your Sears

Service Center withthe exceptionof the itemslistedin the "Customer Responsibilities"section of this manual. For example,if impropertoolsare used to remove or ho{dthe flywheelwhen servicingthe clutch, structuraldamage to the flywheelcan occurand cause the-flywheelto burst.

•Make certain the chain stops moving when the throttle trigger is released, For correction,refer to 'Carburetor Adjustments."

•Stop the saw if the chain strikes a foreign object. Inspectunitand repair or replace parts as necessary.

•Disconnect the spark plug before performing any maintenance exceptfor carburetor adjustments.

•Never modify your saw in any way. Use only SEARS ' accessories and replacementparts as recommended.

TRANSPORTING AND STORAGE

•Stop the unit before transporting.

•Allow engine to cool, cover the guide bar and chain, and secure the unitbefore storing or transportingin a vehicle.

•Emptyfuel tank before storing or transporting the unit. Use up any fuel left in the carburetor by starting the engineand letting the engine run until it stops.

•Store unit and fuel in an area where fue! vaporscannot

reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

•Store unit so the chain cannot accidentally cause injury.

•Store the unit out of the r_ach of children.

GUARD AGAINST KICKBACK - Kickback is a dangerous reaction that can lead to serious injury.

KICKBACK

WARNING:

Kickback

KICKBACK CAN OCCUR WHEN THE MOV-

Path

ING CHAIN CONTACTS AN OBJECT ATTHE

 

UPPER PORTION OFTHETIP OFTHE GUIDE

 

BAR OR WHEN THE WOOD CLOSES IN AND

 

PINCHES THE CHAIN IN THE CUT. CONTACT

 

AT THE UPPER PORTION OF THE TIP OF

 

THE GUIDE BAR CAN CAUSE THE CHAIN

 

TO DIG INTO THE OBJECT, WHICH STOPS

 

THE CHAIN FOR AN INSTANT.THE RESULT

 

IS A LIGHTNING FAST, REVERSE REACTION

 

WHICH KICKS THE GUIDE BAR UP AND

Figure 2

BACK TOWARD THE OPERATOR. IF THE

 

CHAIN IS PINCHED ALONG THE TOP OF

Avoid

THE GUIDE BAR, THE GUIDE BAR CAN BE

Obstructions

DRIVEN

RAPIDLY BACK TOWARD THE

OPERATOR. EITHER OFTHESE REACTIONS

 

CAN CAUSE LOSS OF SAW CONTROL

 

WHICH CAN RESULT IN SERIOUS INJURY.

 

DO NOT RELY ONLY ON THE SAFETY

 

DEVICES PROVIDED WITH YOUR SAW. AS

 

A CHAIN

SAW USER, YOU MUST TAKE

ClearThe

SPECIAL SAFETY PRECAUTIONS TO HELP

WorkingArea

KEEP YOUR

CUTTING JOBS FREE FROM

ACCIDENT

OR INJURY.

Figure 3

 

 

 

-3 ¸-

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Result in Serious Injury 358.351080-18 358.351160-16Hours CST Lk WarningFuel Handling NightKnow Your SAW Plan AheadKickback Transporting and StorageUnderstanding Reactwe Forces Safety RulesKickback Safety Features Reduce the Chance of KickbackFull ONE Year Warranty on Craftsman GAS Chain SAW Customer ResponsibilitiesSPECIAL Notice Index Table of ContentsCarton Contents Operation Chain TravelDirection Howto USE Your Chain SAW Chain Oiler FigTHROnLE Control Group Fig Gasoline Fuel Mixture ChartBefore Starting Engine 401 2-CYCLE AIR-COOLED Engine OIL Guide BAR and Chain OILRight Foot through Opening in Rear Handle Starting a Warm EngineDifficult sTARTlinG or Flooded Engine FullTo Avoid PULL-IN Avoid Reactive Pinch ForcesGeneral Operation Tips To Avoid PINCH-KICKBACKOHAMMER to Force the Felling CUT PEN. the Wedge will Hold Tree FellingDetermine the Natural Fall Direction Felling TipsFelling Safety Operation SafetyBucking on the Ground Fig Bucking SafetyBucking Types of Cutting FigNever Cumb Into a Tree Tolimb or Pruning and LimbingPruning Fig Pruning and Limbing TipsCheck for Loose Fasteners and Parts Maintenance ScheduleBefore USE Check for Damaged or Worn PartsChain Gauge Customer ResponsibilitiesCrrftsmrn Sharpening CHAIFure20Side Plate File HolderInside HolderYearly Clean Unit and LabelsAfter USE Every 25 HoursFuel Line Barrel Service and Adjustments Chnn Adjustment , 41,42 & do43notBar Clamp Nuts Fan Housin Pulley Starter Rope Replacement , 45, 46, 47Housing Starter Rope NutsScrew ToolRewind for LOW Speed Mixture ADJUflTME Carburetor AdjustmentsIdle Speed Adjustment is marked with the letter T Idle Speed Adjustment MixtureAcceleration Check Adjusting Procedure Idle Speed Adjustment TLOW Speed Mixture Adjustment L After completing adjustments, check for accelerationInternal Engine StorageGAS Chain SAW Storage Instructions Fuel SystemTrouble Shooting Chart Symptom Cause Correction Trouble Shooting PointsLargeDa Repair PartsBarAdjungKit AssyUmirCo-.ow S30-037733 Foam-Nr FilterClp GrnerRepair Parts 358.351080 358.351160 358.351180 Ifyou Need Repair Service or PartsRepair Service 1-800-4-REPAIR Customer Assistance

358.351080 specifications

The Craftsman 358.351080 is a versatile and reliable gas-powered string trimmer designed for both residential and light commercial use. This trimmer is particularly beloved for its robust performance and user-friendly features, making it an essential tool for maintaining a well-kept lawn or garden.

One of the standout characteristics of the Craftsman 358.351080 is its powerful 32cc, 2-cycle engine. This engine provides ample power to tackle tough weeds, thick grass, and even small brush. Despite its strength, the engine is designed to be fuel-efficient, which translates to longer operating times and fewer fuel refills. The use of a 2-cycle engine means that users will need to mix oil with the gasoline, but this also provides a lightweight and compact design that makes handling easier.

A key feature of the Craftsman 358.351080 is its easy-to-use starting system. This trimmer incorporates an ergonomically designed starting mechanism that aids in quick and effortless ignition, reducing the frustration often associated with starting gas-powered tools. The inclusion of an automatic choke system further enhances this ease of use, ensuring that the engine runs smoothly from the first pull.

The Craftsman 358.351080 also boasts a generous cutting swath of 17 inches. This large cutting diameter allows for efficient trimming, significantly reducing the time it takes to complete lawn maintenance tasks. Additionally, the trimmer is equipped with a dual line bump head which allows for easy line advancement; users can simply tap the head on the ground to release more cutting line when needed.

Comfort is another important aspect of the Craftsman 358.351080. The trimmer features a comfortable, adjustable handle that can be tailored to suit the user’s height and grip preferences. This not only ensures better control while trimming but also helps reduce fatigue during prolonged use. Furthermore, the lightweight design of the trimmer allows for easy maneuverability, making it suitable for various garden types and terrains.

Safety features are also integrated into the design of the Craftsman 358.351080, with protective equipment and safety switches to prevent accidental starts. This commitment to user safety makes it an excellent choice for inexperienced users or those looking to operate the trimmer for extended periods.

In summary, the Craftsman 358.351080 string trimmer is a powerful, efficient, and user-friendly tool. With its impressive engine performance, generous cutting swath, and focus on user comfort and safety, it is well-suited for a variety of landscaping tasks. Whether you are a homeowner or a light commercial operator, this trimmer delivers the reliability and effectiveness needed to keep your outdoor spaces pristine.
Top Page Image Contents