Craftsman 358.351080 manual After USE, Every 25 Hours, Yearly, Clean Unit and Labels

Page 20

i

CUSTOMER RESPONSIBILITIES

•..,J

AFTER USE

CLEAN UNIT AND LABELS

•Clean the unit using a damp cloth with a mild detergent.

•Wipe off the unit with a clean dry cloth,

EVERY 5 HOURS

CLEAN AIR FILTER (Fig. 30)

A dirty air filter decreases the life and performance of the

engine and increases fuel consumptionand harmful emis- sions,

Always clean your air filter after 15 tanksof fuel or 5 hours of operation, whichever is less.Clean more frequently in dusty conditions.Aused air filtercan never be completely cleaned. It is advisable to replaceyour air filter with a new

one after every 50 hours of operation,or annually, which- ever is less.

•Loosen 3 screws on cylindercover,

•Remove cyUndercover.

*Remove air filter.

•Clean the afr filter using hot soapy water. Rinse with clean cool water and air dry completely prior to rein- stalling.

•Lightly oil air filter prior tO installing.Use 2-cycle engine oil or motor oil (SAE 30). Squeeze excess oil from filter. This will improve the efficiencyof the air filter.

•Reinstall air filter.

Reinstall cytindei"cover and 3 screws (15-20 in-lbs.).

Air

Cover

Filter

Screws

,f

Cylinder

Cover

Figure30

EVERY 25 HOURS

INSPECT MUFFLER AND

SPARKARRESTORSCREWINSTA,LEO.

s the unitis used, carbon depositsbuild up on the muffler and spark arrestor screen (if installed), and must be removed to avoid creating a fire hazard or affectingengine

performance.

Required cleaningis every 25 hours of operationor annu- ally, whicheveris less.

Replace the spark arrestor screen if breaks occur.

CLEANING THE SPARK ARRESTOR SCREEN

•Loosen and remove the 2 muffler cover screws.

•Remove the muffler cover (cover snaps into muffler body).

•Remove muffler diffuser and spark arrestor screen assembly. Notice the orientation of these parts for reassembly,

replace if breaks are found inthe screen.

_ lean the spark arrestor screen with a wire brush or

Replace any brokenor cracked parts.

•Reinstall diffuser and spark arrestor screen assembly with roundholes facing up and towards mufflercover. Reinstall muffler cover and 2 screws (7-8 ft-lbs).

Muffler Diffuser/

Muffler

Cover

Screws

/

Body

Cover

Figure 31

YEARLY

REPLACE SPARK PLUG (Fig. 32)

The spark plug s_ould.be replaced each year to ensure the engine starts easier and runs better. ::_parkplug gap

should be .025".

•Loosen 3 screws on cylindercover.

•Remove cylindercover.

•Twist, then pull off the spark plug boot.

•Remove spark plug from c_ncter and discard.

Replace with correct spark plug and tighten with a 3/4" socket wrench (10-12 Ib-ft).

Reinstall spark plug boot.

Reinstall cylindercover and 3 screws (15-20 in-lb).

SCrews

Cylinder

Cover

Plug Boot

k_.

Plug

- 2O

Figure 32

 

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 358.351080-18 358.351160-16 Hours CSTLk Warning Result in Serious InjuryNight Know Your SAWPlan Ahead Fuel HandlingTransporting and Storage KickbackSafety Rules Kickback Safety FeaturesReduce the Chance of Kickback Understanding Reactwe ForcesSPECIAL Notice Full ONE Year Warranty on Craftsman GAS Chain SAWCustomer Responsibilities Table of Contents IndexCarton Contents Direction OperationChain Travel THROnLE Control Group Fig Howto USE Your Chain SAWChain Oiler Fig Fuel Mixture Chart Before Starting Engine401 2-CYCLE AIR-COOLED Engine OIL Guide BAR and Chain OIL GasolineStarting a Warm Engine Difficult sTARTlinG or Flooded EngineFull Right Foot through Opening in Rear HandleAvoid Reactive Pinch Forces General Operation TipsTo Avoid PINCH-KICKBACK To Avoid PULL-INTree Felling Determine the Natural Fall DirectionFelling Tips OHAMMER to Force the Felling CUT PEN. the Wedge will HoldOperation Safety Felling SafetyBucking Safety BuckingTypes of Cutting Fig Bucking on the Ground FigPruning and Limbing Pruning FigPruning and Limbing Tips Never Cumb Into a Tree Tolimb orMaintenance Schedule Before USECheck for Damaged or Worn Parts Check for Loose Fasteners and PartsCustomer Responsibilities CrrftsmrnSharpening CHAIFure20 Chain GaugeFile Holder InsideHolder Side PlateClean Unit and Labels After USEEvery 25 Hours YearlyFuel Line Barrel Bar Clamp Nuts Service and AdjustmentsChnn Adjustment , 41,42 & do43not Starter Rope Replacement , 45, 46, 47 Housing Starter RopeNutsScrew Tool Fan Housin PulleyRewind for Carburetor Adjustments Idle Speed Adjustment is marked with the letter TIdle Speed Adjustment Mixture LOW Speed Mixture ADJUflTMEAdjusting Procedure Idle Speed Adjustment T LOW Speed Mixture Adjustment LAfter completing adjustments, check for acceleration Acceleration CheckStorage GAS Chain SAW Storage InstructionsFuel System Internal EngineTrouble Shooting Points Trouble Shooting Chart Symptom Cause CorrectionRepair Parts BarAdjungKitAssy LargeDaS30-037733 Foam-Nr Filter ClpGrner UmirCo-.owRepair Parts Ifyou Need Repair Service or Parts Repair Service 1-800-4-REPAIRCustomer Assistance 358.351080 358.351160 358.351180

358.351080 specifications

The Craftsman 358.351080 is a versatile and reliable gas-powered string trimmer designed for both residential and light commercial use. This trimmer is particularly beloved for its robust performance and user-friendly features, making it an essential tool for maintaining a well-kept lawn or garden.

One of the standout characteristics of the Craftsman 358.351080 is its powerful 32cc, 2-cycle engine. This engine provides ample power to tackle tough weeds, thick grass, and even small brush. Despite its strength, the engine is designed to be fuel-efficient, which translates to longer operating times and fewer fuel refills. The use of a 2-cycle engine means that users will need to mix oil with the gasoline, but this also provides a lightweight and compact design that makes handling easier.

A key feature of the Craftsman 358.351080 is its easy-to-use starting system. This trimmer incorporates an ergonomically designed starting mechanism that aids in quick and effortless ignition, reducing the frustration often associated with starting gas-powered tools. The inclusion of an automatic choke system further enhances this ease of use, ensuring that the engine runs smoothly from the first pull.

The Craftsman 358.351080 also boasts a generous cutting swath of 17 inches. This large cutting diameter allows for efficient trimming, significantly reducing the time it takes to complete lawn maintenance tasks. Additionally, the trimmer is equipped with a dual line bump head which allows for easy line advancement; users can simply tap the head on the ground to release more cutting line when needed.

Comfort is another important aspect of the Craftsman 358.351080. The trimmer features a comfortable, adjustable handle that can be tailored to suit the user’s height and grip preferences. This not only ensures better control while trimming but also helps reduce fatigue during prolonged use. Furthermore, the lightweight design of the trimmer allows for easy maneuverability, making it suitable for various garden types and terrains.

Safety features are also integrated into the design of the Craftsman 358.351080, with protective equipment and safety switches to prevent accidental starts. This commitment to user safety makes it an excellent choice for inexperienced users or those looking to operate the trimmer for extended periods.

In summary, the Craftsman 358.351080 string trimmer is a powerful, efficient, and user-friendly tool. With its impressive engine performance, generous cutting swath, and focus on user comfort and safety, it is well-suited for a variety of landscaping tasks. Whether you are a homeowner or a light commercial operator, this trimmer delivers the reliability and effectiveness needed to keep your outdoor spaces pristine.
Top Page Image Contents