32
Power Up Procedure
To power up the Lightning system:
1.Ensure that all peripheral equipment is powered on, including the SVGA monitor and the ShotBox.
2.Press the Power switch on the front of the Lightning chassis. The green Power LED (below the switch) lights when the system is on. At this point, the system boots up and launches the Lightning application.
Power Down Procedure
To power down the Lightning system:
1.Exit from the Lightning application by pressing the standard Windows “close” box in the upper right corner of the window.
2.Click Start on the Windows NT Taskbar.
3.Click Shut Down... to display the Shut Down dialog box.
4.Select the “Shut down the computer” radio button.
5.Click Yes. The system writes unsaved data to disk, then displays the Shutdown Computer dialog box.
6.Press the Power switch on the front of the Lightning chassis to shut down the system.
