6

Remote Control

The Lightning system can be controlled remotely via GPI, RS-422 automa- tion or OLE commands.

System Inputs and Outputs

A Lightning system can be configured with a maximum of three CCIR-601

Input/Output channels as shown below:

Inputs

Outputs

 

 

 

Video

Channel

Key

1

 

Video

Channel

Key

2

Video

Channel

Key

3

Video Out

Key Out

Video Out

Key Out

Video Out Key Out

Lightning

Chassis

Note that each channel has one input which is 4:2:2:4—video plus key (4:2:2 on the video input connector; 4:0:0 on the key input connector).

Refer to Chapter 2, Hardware Installation for complete I/O details.

A Word About Windows NT

The Lightning system runs in the WindowsNT environment. This guide assumes that you are comfortable with standard Windows-based proce- dures, such as using Dialog Boxes. These procedures will not be discussed in this guide. If you are not familiar with Windows NT, refer to your Windows NT User’s Guide or to one of the many third-party books on the subject.

Lightning 1000 Installation Guide

Page 12
Image 12
Pinnacle Speakers Lightning 1000 manual Word About Windows NT, Remote Control, System Inputs and Outputs