monitor the user interface in composite format (typically at distances greater than five meters from the chassis).
5.SVGA Menu Output. One 15-pin “D” connector is provided for the system’s SVGA display menu output. Use this menu output for the maximum video quality. The Y/C and Composite outputs are only available at resolutions less than 800 x 600.
The SVGA output provides a much higher quality output than the Y/C output or Composite output. Use the SVGA output whenever possible.
6.RS-422 Ports. Four 9-pin “D” connectors are provided for connect- ing Lightning to control devices and automation control. RS-422- A and RS-422-B are designed for connection to optional ShotBox controllers. RS-422-C and RS-422-D connectors are provided for connecting Lightning to automation systems for control.
7.Channel 3 Input/Output. This capability is optional on a Lightning system. Two CCIR-601 inputs (Video and Key) and two CCIR-601 outputs (Video and Key) are provided with the option. If the channel is not installed, a blank panel is provided.
8.Channel 2 Input/Output. This capability is optional on a Lightning system. Two CCIR-601 inputs (Video and Key) and two CCIR-601 outputs (Video and Key) are provided with the option. If the channel is not installed, a blank panel is provided.
9.Digital Video Output*. One BNC connector is provided on each installed Channel for a CCIR-601 Digital Video Output. Connect the output to the video input of a destination CCIR-601 device such as a digital video routing switcher or monitor.
10.Channel 1 Input/Output. Channel 1 Input/Output capability is standard on a Lightning system. Two CCIR-601 inputs (Video and Key) and two CCIR-601 outputs (Video and Key) are provided.
11.Digital Key Output*. For all installed channels, one BNC connec- tor is provided for a CCIR-601 Digital Key Output. Connect the output to the key input of a destination CCIR-601 device such as a digital video routing switcher.
12.Rear Connector Panel. The Rear Connector Panel is hinged at the bottom. It drops down to provide access to internal connectors on the backplane.
13.AC Power In. The AC Line cord connects here to provide chassis power.
