Pinnacle Speakers manual Lightning 1000 Installation Guide

17

a b

c

d e

4.Network Card. One RJ-45 jack interconnects to the rear panel Network connector.

5.DVE Card. The standard DVE card provides the electronics for Lightning’s layout, GPI, and remote control capabilities. Two 5- Pin “D” connectors are provided. Use the upper connector only.

6.RS-422 Card. This multi-port serial board connects to the four RS- 422 connectors on the rear panel of the chassis via ribbon cables.

7 – 9. Blank Slots.

10.Channel 3 Digital I/O Card (optional). The Channel 3 Digital I/O card (optional) provides the electronics for the second channel’s digital video and key inputs and outputs. Five connectors are provided. See below for details.

11.Channel 2 Digital I/O Card (optional). The Channel 2 Digital I/O card (optional) provides the electronics for the second channel’s digital video and key inputs and outputs. Five connectors are provided. See below for details.

12.Channel 1 Digital I/O Card (standard). The Channel 1 Digital I/O card (standard) provides the electronics for the first channel’s digital video and key inputs and outputs.

Note that the connectors descriptions listed below apply to all three Digital I/O Cards:

a.Key Out. One mini-BNC jack connects to the rear panel Key Out connector for the selected channel.

b.Video Out. One mini-BNC jack connects to the rear panel Video Out connector for the selected channel.

c.Key In. One mini-BNC jack connects to the rear panel Key In connector for the selected channel.

d.Video Out. One mini-BNC jack connects to the rear panel Video Out connector for the selected channel.

e.Reference. For one channel only, one mini-BNC jack connects to the rear panel Reference In and Reference Loop connectors. This jack is only connected on Channel 1’s card and is not used on Channels 2 and 3.

13.Power. The power cable (from the internal power supply) is routed through this hole to the rear AC connector panel.

14.Keyboard. One 5-pin “PS2” jack interconnects to the rear panel Keyboard connector.

15.Mouse. One 5-pin “PS2” jack interconnects to the rear panel Mouse connector.

16.Com 2 (RS-232). This 9-pin connector is an industry-standard RS- 232 port.

Lightning 1000 Installation Guide