Genie TML-4000N manual Check the Tires and Wheels, Scheduled Maintenance

Page 14

Operator's Manual

Third Edition • Second Printing

 

 

 

 

 

 

MAINTENANCE

Check the Tires and Wheels

Bodily injury hazard. An over- inflated tire can explode and may cause death or serious injury.

Collision hazard. An excessively worn tire can cause poor handling and continued use could result in tire failure.

Tip-over hazard. Do not use temporary flat tire repair products.

Maintaining the tires and wheels in good condition is essential to safe operation and good performance. Tire and/or wheel failure could result in a machine tip-over. Component damage may also result if problems are not discovered and repaired in a timely fashion.

1Check the tire surface and sidewalls for cuts, cracks, punctures and uneven or excessive tread wear. Replace the tire if uneven or excessive tread wear is found.

2Check each wheel for damage, bends and cracks. Replace the wheel if any damage is found.

Tires and wheels must be replaced with tires and wheels of the specifications listed.

3Check each tire with an air pressure gauge and add air as needed.

4 Check the torque of each lug nut.

Tires and wheels - Standard and Narrow models

Tire size

 

ST185/80D13

 

 

 

Rim size

13 x 4.5 in

33 x 11.4 cm

 

 

 

Lug nut torque

80 ft-lbs

108 Nm

 

 

 

Tire pressure (cold)

50 psi

3.4 bar

 

 

 

Scheduled Maintenance

Maintenance performed quarterly, annually and every two years must be completed by a person trained and qualified to perform maintenance on this machine according to the procedures found in the service manual for this machine.

Machines that have been out of service for more than three months must receive the quarterly inspection before they are put back into service.

12

Genie TML-4000 andTML-4000N

Part No. 97600

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Fall HazardsTip-over Hazards Burn Hazard Collision HazardBodily Injury Hazard Crushing HazardsImproper Use Hazard Explosion and Fire HazardsComponent Damage Hazards Towing HazardsDecal Legend Access under this cover Controls Control PanelPre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionCheck the Engine Oil Level MaintenanceObserve and Obey Check the Engine Coolant Level Check the Battery Scheduled Maintenance Check the Tires and WheelsFunction Tests Test the Machine Functions SetupInstall the Lamp Fixtures if applicable Test the Lights Workplace Inspection Operation of Lights Operating InstructionsStarting the Engine To Rotate the Mast To Raise the MastTo Extend the Mast To Stow the MastTowing Towing InformationTransport and Lifting Instructions Securing to Truck or Trailer for TransitLifting the Machine With a Crane Decals Decal InspectionSide ControlPanel Fuel TankSpecifications Model TML-4000 StandardReporting Safety Defects Reporting Safety DefectsDistributed By

TML-4000N, TML-4000 specifications

The Genie TML-4000 and TML-4000N are innovative tag machines designed to optimize and streamline material handling processes in various industrial applications. Both models showcase advanced technologies and superior engineering, making them valuable assets in any operational landscape.

One of the standout features of the TML-4000 series is its robust lifting capacity. The machines can elevate loads up to 4000 kg, ensuring they can handle significant weights with ease. This capability is essential for industries like construction, logistics, and warehousing, where heavy materials need to be maneuvered efficiently.

The TML-4000 incorporates cutting-edge hydraulic systems that provide smooth and controlled lifting and lowering actions. This technology not only enhances safety by preventing sudden drops but also improves the overall efficiency of material handling tasks. The hydraulic system is designed for reliability and durability, ensuring long-lasting performance even in rigorous working conditions.

Both the TML-4000 and TML-4000N are equipped with state-of-the-art control systems that provide intuitive operation. The ergonomic control layouts allow operators to manage the machine effortlessly, minimizing operator fatigue and maximizing productivity. With precise controls, users can navigate tight spaces and carry out intricate maneuvers without compromising safety or efficiency.

The TML-4000N model features additional enhancements, such as advanced stabilization technology. This ensures that loads remain secure during transport, reducing the risk of accidents caused by tipping or loss of control. The enhanced stability is particularly beneficial in environments with uneven surfaces or during dynamic operations.

In terms of mobility, both models are designed with heavy-duty tires that provide excellent traction and stability on various terrains. Their compact design allows for easy maneuverability in tight spaces, making them ideal for indoor and outdoor use alike. With their reliable engine performance and fuel efficiency, these machines are economical choices for businesses looking to reduce operational costs.

Overall, the Genie TML-4000 and TML-4000N stand out in the material handling industry for their combination of power, efficiency, and user-friendly features. With a focus on safety and productivity, they are engineered to meet the demands of modern operations, ensuring that users can perform their tasks effectively and efficiently. Investing in these machines represents a commitment to quality and innovation in material handling solutions.
Top Page Image Contents