Genie TML-4000N manual Test the Lights

Page 17

Third Edition • Second Printing

Operator's Manual

 

 

 

 

 

 

18Press and hold the mast rotation lever.

19Rotate the mast clockwise and then counterclockwise as far as it will go in either direction.

Result: The mast should rotate smoothly and easily in both directions.

20 Rotate the mast back to its original position. Line up the black arrows on the front of the mast.

21Release the mast rotation lever.

22Attempt to rotate the mast in both directions. Result: The mast should not rotate.

23Turn the extend/retract winch handle counterclockwise until the mast sections are fully retracted. Line up the blue arrows on the side of the mast.

Result: No clicking sound should be heard when the winch handle is turned.

24 Pull and hold the mast release latch below the control panel.

25 Begin lowering the mast to the horizontal position by turning the raise/lower winch handle counterclockwise and holding the release latch open.

Result: No clicking sound should be heard when the winch handle is turned.

26 Release the mast release latch and continue to crank the winch handle counterclockwise until the mast reaches horizontal position.

Note: Make sure the mast is lowered completely into the transport cradle. Follow the mast stowing instructions in the Operating Instructions section to make sure the mast hold-down latch is securely locked.

FUNCTION TESTS

Test the Lights

27Make sure the circuit breaker light switches are in the off position.

28Start the engine. See Starting the Engine in the Operating Instructions section.

29Turn all four circuit breaker light switches to the on position.

Result: The lights should come on.

Note: It can take up to 20 minutes for the lights to reach full intensity. If the lights are turned off and turned back on while they are still warm, they will not light up again for 20-30 minutes.

Note: Make sure the circuit breaker light switches are turned off before shutting down the engine.

Part No. 97600

Genie TML-4000 andTML-4000N

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesElectrocution Hazards Fall HazardsTip-over Hazards Bodily Injury Hazard Collision HazardBurn Hazard Crushing HazardsComponent Damage Hazards Explosion and Fire HazardsImproper Use Hazard Towing HazardsDecal Legend Access under this cover Control Panel ControlsFundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionCheck the Engine Oil Level MaintenanceObserve and Obey Check the Engine Coolant Level Check the Battery Check the Tires and Wheels Scheduled MaintenanceFunction Tests Test the Machine Functions SetupInstall the Lamp Fixtures if applicable Test the Lights Workplace Inspection Operation of Lights Operating InstructionsStarting the Engine To Extend the Mast To Raise the MastTo Rotate the Mast To Stow the MastTowing Information TowingSecuring to Truck or Trailer for Transit Transport and Lifting InstructionsLifting the Machine With a Crane Decal Inspection DecalsPanel ControlSide Fuel TankModel TML-4000 Standard SpecificationsReporting Safety Defects Reporting Safety DefectsDistributed By

TML-4000N, TML-4000 specifications

The Genie TML-4000 and TML-4000N are innovative tag machines designed to optimize and streamline material handling processes in various industrial applications. Both models showcase advanced technologies and superior engineering, making them valuable assets in any operational landscape.

One of the standout features of the TML-4000 series is its robust lifting capacity. The machines can elevate loads up to 4000 kg, ensuring they can handle significant weights with ease. This capability is essential for industries like construction, logistics, and warehousing, where heavy materials need to be maneuvered efficiently.

The TML-4000 incorporates cutting-edge hydraulic systems that provide smooth and controlled lifting and lowering actions. This technology not only enhances safety by preventing sudden drops but also improves the overall efficiency of material handling tasks. The hydraulic system is designed for reliability and durability, ensuring long-lasting performance even in rigorous working conditions.

Both the TML-4000 and TML-4000N are equipped with state-of-the-art control systems that provide intuitive operation. The ergonomic control layouts allow operators to manage the machine effortlessly, minimizing operator fatigue and maximizing productivity. With precise controls, users can navigate tight spaces and carry out intricate maneuvers without compromising safety or efficiency.

The TML-4000N model features additional enhancements, such as advanced stabilization technology. This ensures that loads remain secure during transport, reducing the risk of accidents caused by tipping or loss of control. The enhanced stability is particularly beneficial in environments with uneven surfaces or during dynamic operations.

In terms of mobility, both models are designed with heavy-duty tires that provide excellent traction and stability on various terrains. Their compact design allows for easy maneuverability in tight spaces, making them ideal for indoor and outdoor use alike. With their reliable engine performance and fuel efficiency, these machines are economical choices for businesses looking to reduce operational costs.

Overall, the Genie TML-4000 and TML-4000N stand out in the material handling industry for their combination of power, efficiency, and user-friendly features. With a focus on safety and productivity, they are engineered to meet the demands of modern operations, ensuring that users can perform their tasks effectively and efficiently. Investing in these machines represents a commitment to quality and innovation in material handling solutions.
Top Page Image Contents