Genie TML-4000N manual Collision Hazard, Bodily Injury Hazard, Burn Hazard, Crushing Hazards

Page 5

Third Edition • Second Printing

Operator's Manual

 

 

 

 

 

 

Keep away from the machine if it contacts energized power lines. Personnel must not touch or operate the machine until power lines are shut off.

Do not connect wires directly to the generator. Connect auxiliary equipment only to the power outlets provided.

Inspect the power cord for damage prior to each use. Replace any damaged cord before operating.

Do not allow the power cord to become caught or crushed while raising, lowering or rotating the mast.

Avoid electrical shock from contact with battery terminals. Remove all rings, watches and other jewelry.

This machine should be grounded in accordance with all local electrical codes. Consult the local electrical codes or Authority Having Jurisdiction in the area where the machine will be used for specific requirements.

Collision Hazard

Check the work area for overhead obstructions or other possible hazards.

Bodily Injury Hazard

Do not grasp the cable.

Use proper lifting techniques when lifting and positioning the tongue of the machine.

Always replace the protective lamp cover after replacing the lamp bulbs.

SAFETY RULES

Burn Hazard

Do not touch the lamp fixtures while they are turned on. Turn the lamps off and allow them to cool before touching.

Crushing Hazards

Do not lower the mast unless the area below is clear of personnel and obstructions.

Do not release the spring latch on the side of the machine unless the mast sections are fully retracted.

Keep hands and fingers away from any potential pinch points.

Damaged Machine Hazards

Do not use a damaged or malfunctioning machine.

Do not use a machine with a worn, frayed, kinked or damaged cable.

Be sure the operator's manual is complete, legible and in the storage container located on the machine.

Be sure all decals are legible and in place.

Part No. 97600

Genie TML-4000 andTML-4000N

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesElectrocution Hazards Fall HazardsTip-over Hazards Bodily Injury Hazard Collision HazardBurn Hazard Crushing HazardsComponent Damage Hazards Explosion and Fire HazardsImproper Use Hazard Towing HazardsDecal Legend Access under this cover Control Panel ControlsFundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionCheck the Engine Oil Level MaintenanceObserve and Obey Check the Engine Coolant Level Check the Battery Check the Tires and Wheels Scheduled MaintenanceFunction Tests Test the Machine Functions SetupInstall the Lamp Fixtures if applicable Test the Lights Workplace Inspection Operation of Lights Operating InstructionsStarting the Engine To Extend the Mast To Raise the MastTo Rotate the Mast To Stow the MastTowing Information TowingSecuring to Truck or Trailer for Transit Transport and Lifting InstructionsLifting the Machine With a Crane Decal Inspection DecalsPanel ControlSide Fuel TankModel TML-4000 Standard SpecificationsReporting Safety Defects Reporting Safety DefectsDistributed By

TML-4000N, TML-4000 specifications

The Genie TML-4000 and TML-4000N are innovative tag machines designed to optimize and streamline material handling processes in various industrial applications. Both models showcase advanced technologies and superior engineering, making them valuable assets in any operational landscape.

One of the standout features of the TML-4000 series is its robust lifting capacity. The machines can elevate loads up to 4000 kg, ensuring they can handle significant weights with ease. This capability is essential for industries like construction, logistics, and warehousing, where heavy materials need to be maneuvered efficiently.

The TML-4000 incorporates cutting-edge hydraulic systems that provide smooth and controlled lifting and lowering actions. This technology not only enhances safety by preventing sudden drops but also improves the overall efficiency of material handling tasks. The hydraulic system is designed for reliability and durability, ensuring long-lasting performance even in rigorous working conditions.

Both the TML-4000 and TML-4000N are equipped with state-of-the-art control systems that provide intuitive operation. The ergonomic control layouts allow operators to manage the machine effortlessly, minimizing operator fatigue and maximizing productivity. With precise controls, users can navigate tight spaces and carry out intricate maneuvers without compromising safety or efficiency.

The TML-4000N model features additional enhancements, such as advanced stabilization technology. This ensures that loads remain secure during transport, reducing the risk of accidents caused by tipping or loss of control. The enhanced stability is particularly beneficial in environments with uneven surfaces or during dynamic operations.

In terms of mobility, both models are designed with heavy-duty tires that provide excellent traction and stability on various terrains. Their compact design allows for easy maneuverability in tight spaces, making them ideal for indoor and outdoor use alike. With their reliable engine performance and fuel efficiency, these machines are economical choices for businesses looking to reduce operational costs.

Overall, the Genie TML-4000 and TML-4000N stand out in the material handling industry for their combination of power, efficiency, and user-friendly features. With a focus on safety and productivity, they are engineered to meet the demands of modern operations, ensuring that users can perform their tasks effectively and efficiently. Investing in these machines represents a commitment to quality and innovation in material handling solutions.
Top Page Image Contents