Genie TML-4000 manual Setup, Install the Lamp Fixtures if applicable, Test the Machine Functions

Page 16

Operator's Manual

Third Edition • Second Printing

 

 

 

 

 

 

FUNCTION TESTS

Setup

1Position the machine at the desired work site.

2Disconnect the trailer lights and safety chains.

3Open the latch on the coupler.

4Pull the release pin on the tongue outrigger and rotate the outrigger towards the ground until the outrigger pin locks securely in place.

5Turn the jack handle to lower the outrigger foot pad and raise the tongue of the machine enough to clear the tow vehicle.

6Release the spring pin on the side outriggers and lower them to the ground. Make sure the locking arms are locked in place.

7Turn the outrigger jack handles to level the machine. Level the machine using only the leveling jacks.

Install the Lamp Fixtures (if applicable)

For each lamp fixture:

8Remove the lamp fixture from the storage location under the covers.

9Slide the fixture into the holes on the mounting bracket and close the latches.

10Insert and close the safety pins.

11Remove the cap from the receptacle socket and connect the electrical plug.

Note: Make sure the safety pins are properly installed before raising the mast.

Test the Machine Functions

By raising and extending, then retracting and lowering the mast back to the horizontal position, the following functions will be tested: winches, latches, mast extension and mast rotation.

12 Unlock the mast hold-down latch.

13Turn the raise/lower winch handle clockwise until the mast raises approximately 2 feet /

60 cm.

Result: A clicking sound should be heard as the winch handle is turned.

14 Release the winch handle.

Result: The winch brake should hold when the handle is released.

15 Continue to turn the winch handle clockwise until the mast reaches full vertical position.

Result: The mast should raise smoothly, free of hesitation or binding.

Result: The spring latch on the front of the machine should lock the mast securely into place.

16Turn the extend/retract winch handle clockwise until the mast extends approximately 2 feet / 60 cm.

Result: A clicking sound should be heard as the winch handle is turned.

Result: The mast sections should telescope smoothly, free of hesitation or binding.

17 Release the winch handle.

Result: The winch brake should hold when the handle is released.

14

Genie TML-4000 andTML-4000N

Part No. 97600

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessTip-over Hazards Fall HazardsElectrocution Hazards Collision Hazard Bodily Injury HazardBurn Hazard Crushing HazardsExplosion and Fire Hazards Component Damage HazardsImproper Use Hazard Towing HazardsDecal Legend Access under this cover Controls Control PanelPre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionObserve and Obey MaintenanceCheck the Engine Oil Level Check the Engine Coolant Level Check the Battery Scheduled Maintenance Check the Tires and WheelsFunction Tests Install the Lamp Fixtures if applicable SetupTest the Machine Functions Test the Lights Workplace Inspection Starting the Engine Operating InstructionsOperation of Lights To Raise the Mast To Extend the MastTo Rotate the Mast To Stow the MastTowing Towing InformationTransport and Lifting Instructions Securing to Truck or Trailer for TransitLifting the Machine With a Crane Decals Decal InspectionControl PanelSide Fuel TankSpecifications Model TML-4000 StandardReporting Safety Defects Reporting Safety DefectsDistributed By

TML-4000N, TML-4000 specifications

The Genie TML-4000 and TML-4000N are innovative tag machines designed to optimize and streamline material handling processes in various industrial applications. Both models showcase advanced technologies and superior engineering, making them valuable assets in any operational landscape.

One of the standout features of the TML-4000 series is its robust lifting capacity. The machines can elevate loads up to 4000 kg, ensuring they can handle significant weights with ease. This capability is essential for industries like construction, logistics, and warehousing, where heavy materials need to be maneuvered efficiently.

The TML-4000 incorporates cutting-edge hydraulic systems that provide smooth and controlled lifting and lowering actions. This technology not only enhances safety by preventing sudden drops but also improves the overall efficiency of material handling tasks. The hydraulic system is designed for reliability and durability, ensuring long-lasting performance even in rigorous working conditions.

Both the TML-4000 and TML-4000N are equipped with state-of-the-art control systems that provide intuitive operation. The ergonomic control layouts allow operators to manage the machine effortlessly, minimizing operator fatigue and maximizing productivity. With precise controls, users can navigate tight spaces and carry out intricate maneuvers without compromising safety or efficiency.

The TML-4000N model features additional enhancements, such as advanced stabilization technology. This ensures that loads remain secure during transport, reducing the risk of accidents caused by tipping or loss of control. The enhanced stability is particularly beneficial in environments with uneven surfaces or during dynamic operations.

In terms of mobility, both models are designed with heavy-duty tires that provide excellent traction and stability on various terrains. Their compact design allows for easy maneuverability in tight spaces, making them ideal for indoor and outdoor use alike. With their reliable engine performance and fuel efficiency, these machines are economical choices for businesses looking to reduce operational costs.

Overall, the Genie TML-4000 and TML-4000N stand out in the material handling industry for their combination of power, efficiency, and user-friendly features. With a focus on safety and productivity, they are engineered to meet the demands of modern operations, ensuring that users can perform their tasks effectively and efficiently. Investing in these machines represents a commitment to quality and innovation in material handling solutions.
Top Page Image Contents