Genie TML-4000 manual Explosion and Fire Hazards, Component Damage Hazards, Improper Use Hazard

Page 6

Operator's Manual

Third Edition • Second Printing

 

 

 

 

 

 

SAFETY RULES

Explosion and Fire Hazards

Do not start the engine if you smell or detect diesel fuel or other explosive substances.

Do not refuel the machine with the engine running.

Refuel the machine and charge the battery only in an open, well-ventilated area away from sparks, flames and lighted tobacco.

Do not operate the machine in hazardous locations or locations where potentially flammable or explosive gases or particles may be present.

Keep sparks, flames and lighted tobacco away from the battery. Batteries emit an explosive gas.

Do not spray ether into the engine.

Component Damage Hazards

Do not turn the lights on unless the engine is running. Always turn the lights off before shutting down the engine.

Do not use any battery charger greater than 12V to charge the battery.

Do not expose the battery or the charger to water or rain.

Do not replace lamp bulbs with any bulbs other than those specified on the machine and in this manual.

Improper Use Hazard

When leaving the machine unattended, secure from unauthorized use. Unauthorized personnel may attempt to operate the machine without proper instruction, creating an unsafe condition.

Towing Hazards

Read, understand and obey all of your tow vehicle manufacturer’s recommendations, warnings and instructions before towing this machine.

Do not tow the machine unless the mast is lowered to the horizontal position and is properly stowed in the transport cradle.

Do not tow the machine unless the mast hold-down latch is securely locked in place.

Do not overload your tow vehicle. Check the manufacturer's Gross Vehicle Weight Rating (GVWR). To obtain the gross vehicle weight, add the tongue weight of the trailer to the vehicle weight (including vehicle, passengers and cargo).

Do not load cargo on the machine. The TML is not designed to carry any extra cargo.

Be sure the hitch is securely attached to the tow vehicle.

Be sure the safety chains (if required) are securely attached to the tow vehicle.

Be sure that all driving lights are operational.

Be sure all hitch components, lights and mirrors and methods of attaching the trailer to the tow vehicle conform to local, state and federal regulations.

Do not tow the machine on public roads unless it meets all governmental regulations for towing.

Do not exceed 60 mph / 97 km/h. Obey all local and national towing speed laws.

Be sure to chock the wheels of the trailer when parking on a hill.

4

Genie TML-4000 andTML-4000N

Part No. 97600

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessFall Hazards Tip-over HazardsElectrocution Hazards Burn Hazard Collision HazardBodily Injury Hazard Crushing HazardsImproper Use Hazard Explosion and Fire HazardsComponent Damage Hazards Towing HazardsDecal Legend Access under this cover Controls Control PanelPre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionMaintenance Observe and ObeyCheck the Engine Oil Level Check the Engine Coolant Level Check the Battery Scheduled Maintenance Check the Tires and WheelsFunction Tests Setup Install the Lamp Fixtures if applicableTest the Machine Functions Test the Lights Workplace Inspection Operating Instructions Starting the EngineOperation of Lights To Rotate the Mast To Raise the MastTo Extend the Mast To Stow the MastTowing Towing InformationTransport and Lifting Instructions Securing to Truck or Trailer for TransitLifting the Machine With a Crane Decals Decal InspectionSide ControlPanel Fuel TankSpecifications Model TML-4000 StandardReporting Safety Defects Reporting Safety DefectsDistributed By

TML-4000N, TML-4000 specifications

The Genie TML-4000 and TML-4000N are innovative tag machines designed to optimize and streamline material handling processes in various industrial applications. Both models showcase advanced technologies and superior engineering, making them valuable assets in any operational landscape.

One of the standout features of the TML-4000 series is its robust lifting capacity. The machines can elevate loads up to 4000 kg, ensuring they can handle significant weights with ease. This capability is essential for industries like construction, logistics, and warehousing, where heavy materials need to be maneuvered efficiently.

The TML-4000 incorporates cutting-edge hydraulic systems that provide smooth and controlled lifting and lowering actions. This technology not only enhances safety by preventing sudden drops but also improves the overall efficiency of material handling tasks. The hydraulic system is designed for reliability and durability, ensuring long-lasting performance even in rigorous working conditions.

Both the TML-4000 and TML-4000N are equipped with state-of-the-art control systems that provide intuitive operation. The ergonomic control layouts allow operators to manage the machine effortlessly, minimizing operator fatigue and maximizing productivity. With precise controls, users can navigate tight spaces and carry out intricate maneuvers without compromising safety or efficiency.

The TML-4000N model features additional enhancements, such as advanced stabilization technology. This ensures that loads remain secure during transport, reducing the risk of accidents caused by tipping or loss of control. The enhanced stability is particularly beneficial in environments with uneven surfaces or during dynamic operations.

In terms of mobility, both models are designed with heavy-duty tires that provide excellent traction and stability on various terrains. Their compact design allows for easy maneuverability in tight spaces, making them ideal for indoor and outdoor use alike. With their reliable engine performance and fuel efficiency, these machines are economical choices for businesses looking to reduce operational costs.

Overall, the Genie TML-4000 and TML-4000N stand out in the material handling industry for their combination of power, efficiency, and user-friendly features. With a focus on safety and productivity, they are engineered to meet the demands of modern operations, ensuring that users can perform their tasks effectively and efficiently. Investing in these machines represents a commitment to quality and innovation in material handling solutions.
Top Page Image Contents