Genie TML-4000 manual Transport and Lifting Instructions, Securing to Truck or Trailer for Transit

Page 22

Operator's Manual

Third Edition • Second Printing

 

 

 

 

 

 

Transport and Lifting Instructions

Observe and Obey:

Common sense and planning must be applied to control the movement of the machine when lifting it with a crane or forklift.

The transport vehicle must be parked on a level surface.

The transport vehicle must be secured to prevent rolling while the machine is being loaded.

Be sure the vehicle capacity, loading surfaces and chains or straps are sufficient to withstand the machine weight. See the serial plate for the machine weight.

Securing to Truck or Trailer for Transit

Fully lower and retract the mast. See To Stow the Mast in the Operating Instructions section.

Make sure the mast hold-down latch is securely locked in place.

Close and secure the covers.

Lower the tongue outrigger jack to support the tongue during transport.

Raise and stow the outriggers.

Chock the machine wheels in preparation for transport.

Turn the key switch to the off position and remove the key OR lock the control panel to secure from unauthorized use.

Inspect the entire machine for loose or unsecured items.

Securing the Chassis

Place a block on both sides of the axle behind the wheels.

Place a block under the chassis at both ends of the machine.

Use the two tie-down points on the machine for anchoring down to the transport surface.

Use chains or straps of ample load capacity.

Use a minimum of 2 chains to secure the chassis.

Adjust the rigging to prevent damage to the chains.

20

Genie TML-4000 andTML-4000N

Part No. 97600

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessTip-over Hazards Fall HazardsElectrocution Hazards Burn Hazard Collision HazardBodily Injury Hazard Crushing HazardsImproper Use Hazard Explosion and Fire HazardsComponent Damage Hazards Towing HazardsDecal Legend Access under this cover Controls Control PanelPre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionObserve and Obey MaintenanceCheck the Engine Oil Level Check the Engine Coolant Level Check the Battery Scheduled Maintenance Check the Tires and WheelsFunction Tests Install the Lamp Fixtures if applicable SetupTest the Machine Functions Test the Lights Workplace Inspection Starting the Engine Operating InstructionsOperation of Lights To Rotate the Mast To Raise the MastTo Extend the Mast To Stow the MastTowing Towing InformationTransport and Lifting Instructions Securing to Truck or Trailer for TransitLifting the Machine With a Crane Decals Decal InspectionSide ControlPanel Fuel TankSpecifications Model TML-4000 StandardReporting Safety Defects Reporting Safety DefectsDistributed By

TML-4000N, TML-4000 specifications

The Genie TML-4000 and TML-4000N are innovative tag machines designed to optimize and streamline material handling processes in various industrial applications. Both models showcase advanced technologies and superior engineering, making them valuable assets in any operational landscape.

One of the standout features of the TML-4000 series is its robust lifting capacity. The machines can elevate loads up to 4000 kg, ensuring they can handle significant weights with ease. This capability is essential for industries like construction, logistics, and warehousing, where heavy materials need to be maneuvered efficiently.

The TML-4000 incorporates cutting-edge hydraulic systems that provide smooth and controlled lifting and lowering actions. This technology not only enhances safety by preventing sudden drops but also improves the overall efficiency of material handling tasks. The hydraulic system is designed for reliability and durability, ensuring long-lasting performance even in rigorous working conditions.

Both the TML-4000 and TML-4000N are equipped with state-of-the-art control systems that provide intuitive operation. The ergonomic control layouts allow operators to manage the machine effortlessly, minimizing operator fatigue and maximizing productivity. With precise controls, users can navigate tight spaces and carry out intricate maneuvers without compromising safety or efficiency.

The TML-4000N model features additional enhancements, such as advanced stabilization technology. This ensures that loads remain secure during transport, reducing the risk of accidents caused by tipping or loss of control. The enhanced stability is particularly beneficial in environments with uneven surfaces or during dynamic operations.

In terms of mobility, both models are designed with heavy-duty tires that provide excellent traction and stability on various terrains. Their compact design allows for easy maneuverability in tight spaces, making them ideal for indoor and outdoor use alike. With their reliable engine performance and fuel efficiency, these machines are economical choices for businesses looking to reduce operational costs.

Overall, the Genie TML-4000 and TML-4000N stand out in the material handling industry for their combination of power, efficiency, and user-friendly features. With a focus on safety and productivity, they are engineered to meet the demands of modern operations, ensuring that users can perform their tasks effectively and efficiently. Investing in these machines represents a commitment to quality and innovation in material handling solutions.
Top Page Image Contents