Genie TML-4000N manual Workplace Inspection, Do Not Operate Unless

Page 18

Operator's Manual

Third Edition • Second Printing

 

 

 

 

 

 

Workplace Inspection

Do Not Operate Unless:

You learn and practice the principles of safe machine operation contained in this operator's manual.

1Avoid hazardous situations.

2Always perform a pre-operation inspection.

3Always perform function tests prior to use.

4Inspect the workplace.

Know and understand the workplace inspection before going on to the next section.

5Only use the machine as it was intended.

Be aware of and avoid the following hazardous situations:

·Drop-offs or holes

·Bumps and obstructions

·Debris

·Slopes that exceed the machine’s leveling capability

·Unstable or slippery surfaces

·Overhead obstructions and high voltage conductors

·Hazardous locations

·Inadequate surface support to withstand all load forces imposed by the machine

·Wind and weather conditions

·The presence of unauthorized personnel

·All other possible unsafe conditions

Fundamentals

The workplace inspection helps the operator determine if the workplace is suitable for safe machine operation. It should be performed by the operator prior to moving the machine to the workplace.

It is the operator's responsibility to read and remember the workplace hazards, then watch for and avoid them while moving, setting up and operating the machine.

16

Genie TML-4000 andTML-4000N

Part No. 97600

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessFall Hazards Tip-over HazardsElectrocution Hazards Burn Hazard Collision HazardBodily Injury Hazard Crushing HazardsImproper Use Hazard Explosion and Fire HazardsComponent Damage Hazards Towing HazardsDecal Legend Access under this cover Controls Control PanelPre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionMaintenance Observe and ObeyCheck the Engine Oil Level Check the Engine Coolant Level Check the Battery Scheduled Maintenance Check the Tires and WheelsFunction Tests Setup Install the Lamp Fixtures if applicableTest the Machine Functions Test the Lights Workplace Inspection Operating Instructions Starting the EngineOperation of Lights To Rotate the Mast To Raise the MastTo Extend the Mast To Stow the MastTowing Towing InformationTransport and Lifting Instructions Securing to Truck or Trailer for TransitLifting the Machine With a Crane Decals Decal InspectionSide ControlPanel Fuel TankSpecifications Model TML-4000 StandardReporting Safety Defects Reporting Safety DefectsDistributed By

TML-4000N, TML-4000 specifications

The Genie TML-4000 and TML-4000N are innovative tag machines designed to optimize and streamline material handling processes in various industrial applications. Both models showcase advanced technologies and superior engineering, making them valuable assets in any operational landscape.

One of the standout features of the TML-4000 series is its robust lifting capacity. The machines can elevate loads up to 4000 kg, ensuring they can handle significant weights with ease. This capability is essential for industries like construction, logistics, and warehousing, where heavy materials need to be maneuvered efficiently.

The TML-4000 incorporates cutting-edge hydraulic systems that provide smooth and controlled lifting and lowering actions. This technology not only enhances safety by preventing sudden drops but also improves the overall efficiency of material handling tasks. The hydraulic system is designed for reliability and durability, ensuring long-lasting performance even in rigorous working conditions.

Both the TML-4000 and TML-4000N are equipped with state-of-the-art control systems that provide intuitive operation. The ergonomic control layouts allow operators to manage the machine effortlessly, minimizing operator fatigue and maximizing productivity. With precise controls, users can navigate tight spaces and carry out intricate maneuvers without compromising safety or efficiency.

The TML-4000N model features additional enhancements, such as advanced stabilization technology. This ensures that loads remain secure during transport, reducing the risk of accidents caused by tipping or loss of control. The enhanced stability is particularly beneficial in environments with uneven surfaces or during dynamic operations.

In terms of mobility, both models are designed with heavy-duty tires that provide excellent traction and stability on various terrains. Their compact design allows for easy maneuverability in tight spaces, making them ideal for indoor and outdoor use alike. With their reliable engine performance and fuel efficiency, these machines are economical choices for businesses looking to reduce operational costs.

Overall, the Genie TML-4000 and TML-4000N stand out in the material handling industry for their combination of power, efficiency, and user-friendly features. With a focus on safety and productivity, they are engineered to meet the demands of modern operations, ensuring that users can perform their tasks effectively and efficiently. Investing in these machines represents a commitment to quality and innovation in material handling solutions.
Top Page Image Contents