Genie TML-4000 manual To Raise the Mast, To Extend the Mast, To Rotate the Mast, To Stow the Mast

Page 20

Operator's Manual

Third Edition • Second Printing

 

 

 

 

 

 

OPERATING INSTRUCTIONS

To Raise the Mast

1Unlock the mast hold-down latch.

2Turn the Raise/Lower winch handle clockwise until the mast reaches the full vertical position and the front spring latch locks the mast firmly in place.

To Extend the Mast

1Turn the Extend/Retract winch handle clockwise to extend the mast sections.

2Approximately 6 inches / 15 cm below full mast extension, the lamp fixture will begin to tilt. The more the winch handle is turned, the greater the tilt, until the mast is fully extended and the lights are positioned.

Note: To adjust the lights after the mast is fully extended, slowly lower the mast by turning the winch handle counterclockwise until the lights are in the desired position.

To Rotate the Mast

1Press and hold the mast rotation lever and rotate the mast to the desired position.

2Release the lever.

To Stow the Mast

1Press and hold the mast rotation lever and rotate the mast to its original position. Line up the black arrows on the front of the mast.

2Turn the Extend/Retract winch handle counterclockwise until the mast sections retract. The mast is fully retracted when the blue arrows on the side of the mast are lined up.

3Pull and hold the mast release latch below the control panel.

4Turn the Raise/Lower winch handle counterclockwise and lower the mast completely into the transport cradle.

Note: If the mast has not been fully retracted, it will not rest completely in the cradle.

5Turn the mast hold-down latch handle counterclockwise and push into the lock.

6Turn the latch handle clockwise until the handle points straight down. The latch should turn freely without binding or hesitation.

Grounding Rod Attachment

A grounding rod attachment is located next to the generator under the cover on the control panel side of the machine.

After Each Use

1Select a safe parking location—firm, level surface, clear of obstructions and traffic.

2Remove the key OR lock the control panel to secure from unauthorized use.

To Store the Lamp Fixtures (Standard models)

Note: Do not touch hot lamp fixtures. Make sure the lights are turned off and the lamp fixtures have cooled down before touching.

For each lamp fixture:

1Disconnect the electrical plug and cap the receptacle socket.

2Remove the safety pins and release the latches.

3Pull the lamp fixture up and off the mounting bracket.

4Slide the lamp fixture onto the channels located under the covers.

5Close and secure the covers before transport.

18

Genie TML-4000 andTML-4000N

Part No. 97600

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Fall HazardsTip-over Hazards Collision Hazard Bodily Injury HazardBurn Hazard Crushing HazardsExplosion and Fire Hazards Component Damage HazardsImproper Use Hazard Towing HazardsDecal Legend Access under this cover Controls Control PanelPre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionCheck the Engine Oil Level MaintenanceObserve and Obey Check the Engine Coolant Level Check the Battery Scheduled Maintenance Check the Tires and WheelsFunction Tests Test the Machine Functions SetupInstall the Lamp Fixtures if applicable Test the Lights Workplace Inspection Operation of Lights Operating InstructionsStarting the Engine To Raise the Mast To Extend the MastTo Rotate the Mast To Stow the MastTowing Towing InformationTransport and Lifting Instructions Securing to Truck or Trailer for TransitLifting the Machine With a Crane Decals Decal InspectionControl PanelSide Fuel TankSpecifications Model TML-4000 StandardReporting Safety Defects Reporting Safety DefectsDistributed By

TML-4000N, TML-4000 specifications

The Genie TML-4000 and TML-4000N are innovative tag machines designed to optimize and streamline material handling processes in various industrial applications. Both models showcase advanced technologies and superior engineering, making them valuable assets in any operational landscape.

One of the standout features of the TML-4000 series is its robust lifting capacity. The machines can elevate loads up to 4000 kg, ensuring they can handle significant weights with ease. This capability is essential for industries like construction, logistics, and warehousing, where heavy materials need to be maneuvered efficiently.

The TML-4000 incorporates cutting-edge hydraulic systems that provide smooth and controlled lifting and lowering actions. This technology not only enhances safety by preventing sudden drops but also improves the overall efficiency of material handling tasks. The hydraulic system is designed for reliability and durability, ensuring long-lasting performance even in rigorous working conditions.

Both the TML-4000 and TML-4000N are equipped with state-of-the-art control systems that provide intuitive operation. The ergonomic control layouts allow operators to manage the machine effortlessly, minimizing operator fatigue and maximizing productivity. With precise controls, users can navigate tight spaces and carry out intricate maneuvers without compromising safety or efficiency.

The TML-4000N model features additional enhancements, such as advanced stabilization technology. This ensures that loads remain secure during transport, reducing the risk of accidents caused by tipping or loss of control. The enhanced stability is particularly beneficial in environments with uneven surfaces or during dynamic operations.

In terms of mobility, both models are designed with heavy-duty tires that provide excellent traction and stability on various terrains. Their compact design allows for easy maneuverability in tight spaces, making them ideal for indoor and outdoor use alike. With their reliable engine performance and fuel efficiency, these machines are economical choices for businesses looking to reduce operational costs.

Overall, the Genie TML-4000 and TML-4000N stand out in the material handling industry for their combination of power, efficiency, and user-friendly features. With a focus on safety and productivity, they are engineered to meet the demands of modern operations, ensuring that users can perform their tasks effectively and efficiently. Investing in these machines represents a commitment to quality and innovation in material handling solutions.
Top Page Image Contents