Orion C08001, C05001 owner manual CEA Specifications, Output Plate

Page 5

9.Lo-Pass Crossover Frequency Control - adjusts the frequency of the crossover.

10.Remote Bass Gain Jack - connects RGC-2 (remote bass control).

11.Status LED - Will indicate any fault condition in amplifier, also lights briefly during muting phase of turn-on.

Output Plate

Figure 2

Figura 2

Abbildung 2

1

2

2

3

4

5

1.Speaker Connections - accepts up to 12 AWG speaker wire.

2.2 ATC Fuses - protects the amplifier from over current situations.

3.Power Connections - accepts up to 4 AWG power cables.

4.REM Remote Turn-on Input - turns on/off the amplifier when fed Switched 9 - 15 V+.

5.Ground Connection - accepts up to 4 AWG ground cable.

CEA SPECIFICATIONS

CO5001

Power Output: 175 Watts RMS x 1 at 4 ohms and < 1% THD+N

Signal to Noise Ratio: -80 dBA (reference 1 Watt into 4 ohms)

Additional Power: 250 Watts RMS x 1 at 2 ohms and < 1% THD+N

CO8001

Power Output: 300 Watts RMS x 1 at 4 ohms and < 1% THD+N

Signal to Noise Ratio: -75 dBA (reference 1 Watt into 4 ohms)

Additional Power: 400 Watts RMS x 1 at 2 ohms and < 1% THD+N

4

© 2008 directed electronics—all rights reserved

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Amplifier Table of Contents Practice Safe Sound IntroductionWHAT’S in the BOX Input Plate Tools of the TradeEND Panel Layouts Output Plate CEA SpecificationsHigh Level Harnesses Amplifier SettingsPower Connections for the Orion Cobalt CO5001 and CO8001 Amplifier WiringSpeaker Wiring Diagram CO5001/CO8001 Low-Pass CrossoverBridging Amplifier InstallationChoosing Mounting Locations Passenger CompartmentTrunk Compartment General Precautions and Installation TipsStep By Step Installation Testing the System SET UP and TroubleshootingAdjusting the Sound of the System Symptom Probable Cause Action To Take Troubleshooting TipsSymptom Probable Cause Action To Take Crossover Section SpecificationsAmplifier Section CO5001 CO8001 Directed electronics-all rights reserved Panneau de sortie figure Agencement DES Panneaux DextrémitéPanneau dentrée figure Spécifications DE Lace Configurations dentrée et sortie du signalFaisceaux À Haut Niveau Réglages DE LamplificateurCâblage DE Lamplificateur Choix de lemplacement du montage Installation DE LamplificateurCâblage des haut-parleurs CO5001/CO8001 Branchement en pontCoffre Précautions générales et conseils dinstallationInstallation étape par étape Essai du système Réglage ET DépannageRéglage sonore du système Symptôme Cause probable Faire Conseils de dépannageDirected electronics-all rights reserved Section répartiteur SpécificationsSection amplificateur CO5001 CO8001 Placa de salida figura Disposiciones DEL Panel DE ExtremoPlaca de entrada figura Configuraciones de salida y entrada de señal Configuraciones DEL AmplificadorEspecificaciones DE LA CEA Arneses DE Cableado DE Alto NivelCableado DEL Amplificador Instalación DEL Amplificador Diagrama de cableado de altavoces del CO5001/CO8001Conexión en puente Selección de ubicaciones de montajePrecauciones generales y sugerencias de instalación Compartimiento de pasajerosMaletero Prueba del sistema Configuración Y Detección Y Reparación DE AveríasInstalación paso a paso Ajuste de sonido del sistema Síntoma Causa probable Medidas a tomar Sugerencias de detección y reparación de averíasDirected electronics-all rights reserved Sección de crossover EspecificacionesSección de amplificador CO5001 CO8001 Ausgangsplatte abbildung Layout DER EndplattenAnschlussplatte abbildung CEA-DATEN Signaleingangs- und -ausgangskonfigurationenHOCHPEGEL-LEITUNGSSYSTEME VerstärkereinstellungenVerstärkeranschluss Lautsprecher-Anschlussdiagramm CO5001/CO8001 VerstärkerinstallationBrückenmodus Wahl der EinbaustelleKofferraum Allgemeine Vorsichts- und InstallationshinweiseFahrgastraum Systemtest Einrichtung UND ProblembehebungSchrittweise Installation Systemsound einstellen Symptom Mögliche Ursache Lösung ProblemlösungenDirected electronics-all rights reserved Crossover-Bereich DatenVerstärkerbereich CO5001 CO8001 Pannello di uscita figura Layout DEI Pannelli TerminaliPannello d’ingresso figura Specifiche CEA Configurazione dei segnali d’ingresso e di uscitaCavi DI Livello Alto Impostazioni DELL’AMPLIFICATORECablaggio DELL’AMPLIFICATORE Cablaggio a ponte Installazione DELL’AMPLIFICATOREScelta del punto di installazione Bagagliaio Precauzioni generali e suggerimenti per l’installazioneAbitacolo Prova dell’impianto Messa a Punto E Soluzione DEI ProblemiProcedura di installazione Regolazione dell’audio dell’impianto Sintomo Causa probabile Intervento necessario Soluzione dei problemiDirected electronics-all rights reserved Sezione crossover Dati TecniciSezione amplificatore CO5001 CO8001 Painel de saída figura Layouts DOS PainéisPainel de entrada figura Especificações DA CEA Configurações de entrada e saída dos sinaisLigações DE Alto Nível Ajustes do AmplificadorConexão DOS Cabos do Amplificador Esquema de conexão dos alto-falantes ao CO5001/CO8001 Instalação do AmplificadorLigação em ponte Escolha de locais de instalaçãoPrecauções gerais e sugestões de instalação Cabine de passageirosPorta-malas Como testar o sistema Instalação E Resolução DE ProblemasInstalação passo a passo Como ajustar o som do sistema Problema Provável causa Medida a ser tomada Sugestões para resolução de problemasDirected electronics-all rights reserved Seção do crossover EspecificaçõesSeção do amplificador CO5001 CO8001 Warranty

C08001, C05001 specifications

The Orion C05001 and C08001 represent a remarkable leap in technology and innovation, designed to cater to the evolving demands of modern users in various sectors, from industrial applications to advanced consumer electronics. These models stand out not just for their robust performance but also for their cutting-edge features.

Starting with the Orion C05001, this device showcases a sleek and compact design, making it an ideal choice for those who prioritize portability without compromising functionality. It is equipped with a powerful processor that ensures seamless multitasking and efficient handling of resource-intensive applications. The C05001 also boasts enhanced connectivity options, including advanced wireless capabilities, which allow users to stay connected even in remote areas.

In terms of display, the C05001 offers a high-resolution screen that provides clear, vibrant visuals, making it suitable for both professional presentations and entertainment purposes. The device’s battery life is another strong point, featuring long-lasting performance that enables users to work or play without the constant worry of recharging.

On the other hand, the Orion C08001 takes performance up a notch with its larger display and enhanced processing power. This model is ideal for users who require a more immersive experience, whether for gaming, graphic design, or data analysis. The C08001 supports advanced graphics, making it suitable for high-demand applications that require detailed visuals and fast frame rates.

Both models leverage state-of-the-art technologies, including artificial intelligence and machine learning capabilities. These features enable smarter performance optimization, energy efficiency, and intuitive user interfaces that adapt to user preferences and habits.

Another key characteristic of the Orion C05001 and C08001 is their durable construction, designed to withstand tough conditions. This resilience makes them perfect for industrial environments where reliability is paramount.

Moreover, security features in both models ensure that users' data remains protected, incorporating encryption and biometric authentication, which are increasingly essential in today’s digital landscape.

In summary, the Orion C05001 and C08001 are not just devices; they are engineered solutions that combine high performance, cutting-edge technology, and robust features, making them suitable for a wide range of applications, from everyday tasks to complex industrial challenges. Their innovative designs promise to enhance productivity and user experience, setting new standards in their respective categories.
Top Page Image Contents