Sears 917.257462 manual Service and Adjustments, To Level Mower Housing See Fig

Page 19

SERVICE AND ADJUSTMENTS

TO LEVEL MOWER HOUSING (See Fig. 23 -

Fig. 26)

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See "PRODUCT SPECIFICATIONS" on page 3). If tires are

over or under inflated, you will not properly adjust your mower.

NOTE: One rotation of trunnion nut is equivalent to ap- proximately 1/8 inch of height change. Be sure upper and lower nuts are tightened against trunnion after adjustment has been completed.

•Place mower height adjustment knob in position "3" (See Fig. 23).

•Lower mower lift lever to height adjustment knob.

SIDE-TO-SIDE ADJUSTMENT (See Figs. 24 and 25) -

•Measure distance from ground to lower flange of mower deck on both sides of mower (dim. "B°'& "C"). Dim. "B"

&"C" should be the same.

Level the mower side-to side by adjusting the left rear lift link.

•To raise left side of mower, loosen upper trunnion nut tighten the lower trunnion nut.

•To lower left side of mower, loosen lower trunnion nut and tighten upper trunnion nut.

FRONT-TO-BACK ADJUSTMENT (See Figs. 25 and 26)-

To obtain the best cutting results, the mower housing should be adjusted so the rear is approximately 1/4 to 3/8" higher than the front when the mower is in height adjust- ment position "3".

•Measure distance from ground line to lower flange of deck at right front and right rear (dim. "D" & "E") in line with front and rear tires.

Raise or lower rear of mower housing by adjusting the right rear lift link.

•To raise rear of mower housing, loosen upper trunnion nut and tighten lower trunnion nut.

•To lower rear of mower housing, loosen the lower trunnion nut and tighten upper trunnion nut.

•Recheck side-to-side adjustment.

MOWER UFT

LEVER

MOWER HEIGHT

ADJUSTMENT

KNOB

VIEWED FROM FRONT OF TRACTOR

RIGHT

LEFT

SIDE

SIDE

GROUND

UNE

LOWER FLANGE

LEFT REAR

OF MOWER DECK

UFT UNK

FIG. 24

UPPER TRUNNION

REAR UFT UNK

TRUNNION

NUT

FIG. 25

REAR LIFT

UNK

LOWER FLANGE

 

OF MOWER DECK

MOWER HOUSING

FIG. 26

FIG. 23

Page 18 Page 20
Image 19
Page 18 Page 20
Contents HP Electric Start 36 Mower Speed Lawn Rider SearsIII. Children Safety is InvolvedSafe Operation Practices for Ride-On Mowers II. Slope OperationCustomer Responsibilities Product SpecificationsFull 90 DAY Warranty on Battery Maintenance AgreementSparkplug Muffler AIR Filter Stabilizer Blades Belts MaintenanceEngine PerformanceTable of Contents Contents of Hardware Pack Unpack Carton Tools Required for AssemblyTo Remove Unit from Carton Before Rolling Unit OFF SkidHOW to SET UP Your Tractor AssemblyAll assembly instructions have been completed ChecklistKnow Your Lawn Rider OperationTo SET Parking Brake See Fig To USE Throttle Control See FigTo Move Forward and Backward See FigsTo Transport To Adjust Mower Cutting HeightBefore Starting the Engine To Operate Mower See FigsMowing Tips Important When Operating in TemperaturesADD Gasoline Before Each USE MaintenanceLubrication Chart General RecommendationsBrake Operation Lawn RiderBlade Care Blade Removal See FigTransaxle Cooling To Clean Battery and TerminalsEngine AIR Filter See FigSpark Plugs CleaningAIR Screen See Fig MufflerTo Remove Mower See Fig To Install Mower See FigMower Upstop Adjustment See Fig Lawn RiderTo Level Mower Housing See Fig Service and AdjustmentsViewed from Front of Tractor To Replace Motion Drive Belt See Fig To Adjust Brake See FigTo Adjust Steering Wheel Alignment KeeperTo Replace Fuse To Start Engine with a Weak Battery See FigTo Remove Hood See FIG To Remove Wheel for Repairs See FigEngine To Adjust Carburetor See FigTo Adjust Throttle Control Cable Preliminary SettingFuel System BatteryOther TractorProblem Cause Correction Troubleshooting PointsCause Correction ProblemSchematic USA Wheels TiresDecals KEY Part Description NO. noElectrical KEY Part Description ElectricalStandard Hardware - Purchase Locally UNC HoodStandard Hardware - Purchase Locally 19132012 Washer 129965 Case, BatteryFender / Chassis FrameLocknut, Hex, Larg, Flange SeatDash 1011Standard Hardware Purchase Locally KEY Part NO. no Description Steering WheelLower, Steering Link, Drag Sector Gear / Axle SupportBolt, Hex Standard Hardware Purchase Locally Front AxleCap, Spindle 25/32 x 1-5/8 x 16 GaugeHardware Shown Larger Brake / Rear Mower Lift AssemblyKEY 122504XStandard Hardware Purchase Engine / ThrottleIdler, Flat Ground DriveKeeper, Ground Drive Belt, Idler Arm, Ground Drive ClutchTransaxle 2530Pulley STD560907 Mower Lift LeverClip, Fuel Line 106932XMower Deck Mower Deck 2631 2732 FOOTE/DANA Transaxle Model NumberFOOTE/DANA TRANSAXLE- Model Number 219 422 Briggs & Stratton Engine Model Number 283707, Type Number265 3O766S 224 138 44542.1 801 310391086 490450399265 Bearing, Cylinder Requires Special 224061 93805Mounting 635 66538224546 Sight and Hold this Level with SKY Line or Tree Sighting Guide Only Ride UP and Down HILL, not Across HillMAX Model Number 917,257462 HOW to Order Repair Parts19.91

917.257462 specifications

The Sears 917.257462 is a well-known lawn tractor that has earned a reputation for its reliable performance and robust build. Designed for homeowners with medium to large yards, this model combines functionality and ease of use, making it an excellent choice for both novice and experienced gardeners.

One of the standout features of the Sears 917.257462 is its powerful engine. Equipped with a reliable, air-cooled, four-stroke engine, it offers ample horsepower to handle various mowing tasks. The engine's efficient design ensures that it provides consistent power while maintaining fuel economy, allowing owners to tackle extensive lawn areas without frequent refueling.

The cutting system of the Sears 917.257462 is designed for efficiency and versatility. It boasts a durable, reinforced mowing deck that allows for multiple cutting heights, accommodating different grass types and lawn conditions. This adaptability makes it easy to achieve a clean, even cut, regardless of the lawn's terrain. Additionally, the tractor features a bagging system that aids in collecting grass clippings for a tidy finish.

Ergonomics play a crucial role in the design of the Sears 917.257462. The operator's seat is adjustable, providing comfort and promoting good posture during extended use. The steering system is responsive, facilitating easy maneuverability around obstacles in the yard. The controls are intuitively placed, making it simple for users to operate the tractor while focusing on the task at hand.

Another key characteristic of this tractor is its durability. Constructed with high-quality materials, the Sears 917.257462 is built to withstand the rigors of regular use. Its robust frame and fortified components contribute to its longevity, minimizing the need for frequent repairs or replacements.

Furthermore, the tractor’s maintenance requirements are straightforward. Users will find that routine upkeep is manageable, thanks to accessible engine compartments and clear instructions for oil changes and blade sharpening. This ease of maintenance not only saves time but also contributes to the tractor's overall longevity.

In summary, the Sears 917.257462 is a formidable lawn tractor that combines a powerful engine, versatile cutting capabilities, ergonomic design, and durable construction. Its user-friendly features, coupled with low maintenance requirements, make it an ideal choice for those looking to maintain their lawns with efficiency and ease. Whether grooming a small yard or tackling larger landscapes, this model remains a reliable partner in lawn care.
Top Page Image Contents