Troy-Bilt 30331 Service Air Cleaner, Carefully remove cartridge C from base D, Service Spark Plug

Page 17

4.Remove oil drain plug and drain oil completely into a suitable container.

5.Reinstall oil drain plug and tighten securely. Remove oil fill cap.

6.Slowly pour oil (about 20 oz.) into oil fill opening (B) to the point of overflowing (C) at oil fill cap. DO NOT overfill.

7.Reinstall oil fill cap. Finger tighten cap securely.

8.Wipe up any spilled oil.

Service Air Cleaner

Your engine will not run properly and may be damaged if you run it with a dirty air cleaner.

Replace the air cleaner every 25 hours of operation or once each year, whichever comes first. Replace more often if operating under dirty or dusty conditions.

To service the air cleaner, follow these steps:

1.

Loosen screws (A) and remove air cleaner cover (B).

 

D

 

C

 

B

 

A

2.

Carefully remove cartridge (C) from base (D).

3.Install clean (or new) air cleaner assembly inside cover. Dispose of old filter properly.

4.Assemble air cleaner cover onto base and tighten screws.

Service Spark Plug

Change the spark plug every 100 hours of operation or once each year, whichever comes first. This will help your engine to start easier and run better.

1.Clean area around spark plug.

2.Remove and inspect spark plug.

3.Check electrode gap with wire feeler gauge and reset spark plug gap to recommended gap if necessary (see Specifications).

4.Replace spark plug if electrodes are pitted, burned or porcelain is cracked. Use the recommended replacement spark plug. See Specifications.

5.Install spark plug and tighten firmly.

Service Spark Arrester

The engine exhaust muffler has a spark arrester screen. Inspect and clean the screen every 100 hours of operation or once each year, whichever comes first.

If you use your generator on any forest-covered, brush- covered, or grass-covered unimproved land, it must have a spark arrester. The spark arrester must be maintained in good condition by the owner/operator.

WARNING

Contact with muffler area can result in serious burns.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot parts and AVOID hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 feet (1.5 m) of clearance on all sides of generator including overhead.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Call Generator Helpline Failure to read and followQuestions? Help is just a moment away Date Purchased Where to Find Us GeneratorEngine Table of Contents Safety Rules Operator SafetyHazard Symbols and Meanings Safety alert symbol is used with a signal wordBroken bones, fractures, bruises, or sprains could result Engine exhaust from this product containsUnintentional sparking can result in fire or electric shock When Testing for Engine SparkContact with muffler area can result in serious burns Shipment Contents AssemblyInstall Wheel Kit Unpack GeneratorAdd Fuel Add Engine OilReplace oil fill cap and fully tighten Fuel must meet these requirementsSystem Ground Connecting to a Building’s Electrical SystemGenerator Location Special RequirementsUsed to supply electrical power for the operation Features and ControlsVolt AC, 20 Amp, Duplex Receptacles May be Oil Drain Plug Drain engine oil hereGenerator Adapter Cord Set Cord Sets and ReceptaclesProperty damage Volt AC, 20 Amp, Duplex ReceptaclesStarting the Engine OperationMove fuel valve to Off position Connecting Electrical LoadsStopping the Engine Wattage Reference Guide Don’t Overload GeneratorGenerator Maintenance MaintenanceMaintenance Schedule Oil Engine MaintenanceService Spark Plug Service Air CleanerInstall spark plug and tighten firmly Service Spark ArresterAir Cooling System Carburetor AdjustmentStorage Troubleshooting Owner’s Warranty Responsibilities Emissions Control System WarrantyClaims and Coverage Exclusions MaintenanceTROY-BILT Portable Generator Owner Warranty Policy 888 Product SpecificationsCommon Service Parts Llame Línea directa del generador Preguntas? La ayuda es justa un momento lejosFecha de compra Dónde encontrarnos GeneradorMotor Seguridad de Operario Resolución de problemas GarantíasMontaje Controles y característicasDescripción del equipo Seguridad de operarioReglas de seguridad Símbolos de peligro y sus significadosCuando Ponga EN Funcionamiento EL Equipo Cuando Anada Combustible O Vacíe EL DepósitoCuando Opere EL Equipo Cuando Transporte O Repare EL EquipoCuando Pruebe LA Bujía DEL Motor Cuando Ajuste O Haga Reparaciones a SU Máquina GeneradorDesembalaje del generador MontajeContenido de la caja Instale el juego de ruedasAgregue combustible Agregar aceite al motorEl combustible debe reunir los siguientes requisitos Gran altitudConexión al sistema eléctrico de un edificio Tierra del sistemaUbicación del generador Requisitos especialesControles y características Tomas eléctricas dobles de 120 V CA y 20 a Juegos de cordones y enchufes conectoresAmps o mayores Juego de cables del adaptador del generadorEncienda el motor OperandoParada del motor Conexión de cargas eléctricasEl motor podría petardear, incendiarse o dañarse Gire la válvula de combustible blanca hasta la posición OffCapacidad No sobrecargar el generadorEjemplo Control de la energíaMantenimiento del Generador MantenimientoPlan de mantenimiento Aceite Recomendaciones sobre el aceite Mantenimiento del MotorComprobación del Nivel de Aceite Adición de Aceite del MotorLimpia B Servicio del depurador de aireServicio del bujía Limpie la Pantalla ApagachispasAjuste del Carburador Limpie e inspeccione el apagachispas de la siguiente maneraSistema de refrigeración de aire Almacenamiento Problemo Causa Accion Resolución de problemasResponsabilidades de la garantía del propietario Garantía del sistema de control de emisionesServicio gratuito Política Para EL Propietario DE Generador Portátil TROY-BILT Servicio común despide Especificaciones del producto

30331 specifications

The Troy-Bilt 30331 is a powerhouse in the world of lawn care, combining advanced technology with user-friendly features to enhance the mowing experience. Designed for homeowners who prioritize efficiency and performance, this lawn mower is packed with features that make lawn maintenance easier and more enjoyable.

One of the standout characteristics of the Troy-Bilt 30331 is its powerful 382cc OHV engine. This engine delivers ample power and torque, making it efficient at tackling tough grass and uneven terrain. The engine is designed for durability and reliability, ensuring that homeowners can depend on it for years of high-quality lawn care.

A key feature of the Troy-Bilt 30331 is its 21-inch cutting deck, which provides a perfect balance between agility and coverage. The cutting deck is equipped with an adjustable height setting, allowing users to choose their desired grass length, ensuring that lawns look pristine after every mow. The mower also utilizes a tri-action system that allows for superior mulching, bagging, and side discharge functionalities. This versatility not only enhances the aesthetics of your lawn but also contributes to overall lawn health.

User comfort and convenience are top priorities in the design of the Troy-Bilt 30331. It comes with ergonomic handles that reduce fatigue during extended use, and its self-propulsion feature allows users to maintain control while effortlessly navigating various terrains. This feature is especially beneficial for those with larger yards or hilly landscapes.

Another innovative technology incorporated in the Troy-Bilt 30331 is its easy-start system. This feature simplifies the starting process, allowing users to get to work quickly without the hassle of traditional pull-start methods. The mower also includes large rear wheels that provide excellent traction and maneuverability, making it easier to handle tight corners and navigate around obstacles.

Maintenance of the Troy-Bilt 30331 is straightforward, thanks to its accessible design. The cutting blade can be easily removed and sharpened or replaced, and the engine is equipped with a quick oil-change system to keep it running smoothly. With proper care, users can expect longevity and performance from this reliable lawn mower.

In summary, the Troy-Bilt 30331 is an impressive lawn mower that excels in performance, versatility, and user comfort. With its powerful engine, adjustable cutting deck, ergonomic design, and convenient features, it stands out as an excellent choice for homeowners seeking a dependable and efficient mowing solution.
Top Page Image Contents