Troy-Bilt 30331 manual Emissions Control System Warranty, Owner’s Warranty Responsibilities

Page 21

Emissions Control System Warranty

Briggs & Stratton Corporation (B&S), the California Air Resources Board (CARB) and the United States Environmental Protection Agency (U.S. EPA)

Emissions Control System Warranty Statement (Owner’s Defect Warranty Rights and Obligations)

California, United States and Canada Emissions Control Defects Warranty Statement

The California Air Resources Board (CARB), U.S. EPA and B&S are pleased to explain the Emissions Control System Warranty on your small off-road engine (SORE). In California, new small off-road engines model year 2006 and later must be designed, built and equipped to meet the State’s stringent anti-smog standards. Elsewhere in the United States, new non-road, spark-ignition engines certified for model year 1997 and later must meet similar standards set forth by the U.S. EPA. B&S must warrant the emissions control system on your engine for the periods of time listed below, provided there has been no abuse, neglect or improper maintenance of your small off-road engine.

Your emissions control system includes parts such as the carburetor, air cleaner, ignition system, fuel line, muffler and catalytic converter. Also included may be connectors and other emissions related assemblies.

Where a warrantable condition exists, B&S will repair your small off-road engine at no cost to you including diagnosis, parts and labor.

Briggs & Stratton Emissions Control Defects Warranty Coverage

Small off-road engines are warranted relative to emissions control parts defects for a period of two years, subject to provisions set forth below. If any covered part on your engine is defective, the part will be repaired or replaced by B&S.

Owner’s Warranty Responsibilities

As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in your Operating and Maintenance Instructions. B&S recommends that you retain all your receipts covering maintenance on your small off-road engine, but B&S cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

As the small off-road engine owner, you should however be aware that B&S may deny you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

You are responsible for presenting your small off-road engine to an Authorized B&S Service Dealer as soon as a problem exists. The undisputed warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact a B&S Service Representative at (414) 259-5262.

The emissions warranty is a defects warranty. Defects are judged on normal engine performance. The warranty is not related to an in-use emissions test.

Briggs & Stratton Emissions Control Defects Warranty Provisions

The following are specific provisions relative to your Emissions Control Defects Warranty Coverage. It is in addition to the B&S engine warranty for non-regulated engines found in the Operator’s Manual.

1.Warranted Parts

Coverage under this warranty extends only to the parts listed below (the emissions control systems parts) to the extent these parts were present on the engine purchased.

a.Fuel Metering System

•Cold start enrichment system (soft choke)

•Carburetor and internal parts

•Fuel Pump

•Fuel line, fuel line fittings, clamps

b.Air Induction System

•Air cleaner

•Intake manifold

c.Ignition System

•Spark plug(s)

•Magneto ignition system

d.Catalyst System

•Catalytic converter

•Exhaust manifold

•Air injection system or pulse valve

e.Miscellaneous Items Used in Above Systems

•Vacuum, temperature, position, time sensitive valves and switches

•Connectors and assemblies

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Failure to read and follow Questions? Help is just a moment awayCall Generator Helpline Where to Find Us Generator EngineDate Purchased Table of Contents Safety Rules Operator SafetyHazard Symbols and Meanings Safety alert symbol is used with a signal wordBroken bones, fractures, bruises, or sprains could result Engine exhaust from this product containsWhen Testing for Engine Spark Contact with muffler area can result in serious burnsUnintentional sparking can result in fire or electric shock Shipment Contents AssemblyInstall Wheel Kit Unpack GeneratorAdd Fuel Add Engine OilReplace oil fill cap and fully tighten Fuel must meet these requirementsSystem Ground Connecting to a Building’s Electrical SystemGenerator Location Special RequirementsUsed to supply electrical power for the operation Features and ControlsVolt AC, 20 Amp, Duplex Receptacles May be Oil Drain Plug Drain engine oil hereGenerator Adapter Cord Set Cord Sets and ReceptaclesProperty damage Volt AC, 20 Amp, Duplex ReceptaclesStarting the Engine OperationConnecting Electrical Loads Stopping the EngineMove fuel valve to Off position Wattage Reference Guide Don’t Overload GeneratorMaintenance Maintenance ScheduleGenerator Maintenance Oil Engine MaintenanceService Spark Plug Service Air CleanerInstall spark plug and tighten firmly Service Spark ArresterAir Cooling System Carburetor AdjustmentStorage Troubleshooting Owner’s Warranty Responsibilities Emissions Control System WarrantyClaims and Coverage Exclusions MaintenanceTROY-BILT Portable Generator Owner Warranty Policy Product Specifications Common Service Parts888 Llame Línea directa del generador Preguntas? La ayuda es justa un momento lejosDónde encontrarnos Generador MotorFecha de compra Seguridad de Operario Resolución de problemas GarantíasMontaje Controles y característicasDescripción del equipo Seguridad de operarioReglas de seguridad Símbolos de peligro y sus significadosCuando Ponga EN Funcionamiento EL Equipo Cuando Anada Combustible O Vacíe EL DepósitoCuando Opere EL Equipo Cuando Transporte O Repare EL EquipoCuando Pruebe LA Bujía DEL Motor Cuando Ajuste O Haga Reparaciones a SU Máquina GeneradorDesembalaje del generador MontajeContenido de la caja Instale el juego de ruedasAgregue combustible Agregar aceite al motorEl combustible debe reunir los siguientes requisitos Gran altitudConexión al sistema eléctrico de un edificio Tierra del sistemaUbicación del generador Requisitos especialesControles y características Tomas eléctricas dobles de 120 V CA y 20 a Juegos de cordones y enchufes conectoresAmps o mayores Juego de cables del adaptador del generadorEncienda el motor OperandoParada del motor Conexión de cargas eléctricasEl motor podría petardear, incendiarse o dañarse Gire la válvula de combustible blanca hasta la posición OffCapacidad No sobrecargar el generadorEjemplo Control de la energíaMantenimiento Plan de mantenimientoMantenimiento del Generador Aceite Recomendaciones sobre el aceite Mantenimiento del MotorComprobación del Nivel de Aceite Adición de Aceite del MotorLimpia B Servicio del depurador de aireServicio del bujía Limpie la Pantalla ApagachispasLimpie e inspeccione el apagachispas de la siguiente manera Sistema de refrigeración de aireAjuste del Carburador Almacenamiento Problemo Causa Accion Resolución de problemasResponsabilidades de la garantía del propietario Garantía del sistema de control de emisionesServicio gratuito Política Para EL Propietario DE Generador Portátil TROY-BILT Servicio común despide Especificaciones del producto

30331 specifications

The Troy-Bilt 30331 is a powerhouse in the world of lawn care, combining advanced technology with user-friendly features to enhance the mowing experience. Designed for homeowners who prioritize efficiency and performance, this lawn mower is packed with features that make lawn maintenance easier and more enjoyable.

One of the standout characteristics of the Troy-Bilt 30331 is its powerful 382cc OHV engine. This engine delivers ample power and torque, making it efficient at tackling tough grass and uneven terrain. The engine is designed for durability and reliability, ensuring that homeowners can depend on it for years of high-quality lawn care.

A key feature of the Troy-Bilt 30331 is its 21-inch cutting deck, which provides a perfect balance between agility and coverage. The cutting deck is equipped with an adjustable height setting, allowing users to choose their desired grass length, ensuring that lawns look pristine after every mow. The mower also utilizes a tri-action system that allows for superior mulching, bagging, and side discharge functionalities. This versatility not only enhances the aesthetics of your lawn but also contributes to overall lawn health.

User comfort and convenience are top priorities in the design of the Troy-Bilt 30331. It comes with ergonomic handles that reduce fatigue during extended use, and its self-propulsion feature allows users to maintain control while effortlessly navigating various terrains. This feature is especially beneficial for those with larger yards or hilly landscapes.

Another innovative technology incorporated in the Troy-Bilt 30331 is its easy-start system. This feature simplifies the starting process, allowing users to get to work quickly without the hassle of traditional pull-start methods. The mower also includes large rear wheels that provide excellent traction and maneuverability, making it easier to handle tight corners and navigate around obstacles.

Maintenance of the Troy-Bilt 30331 is straightforward, thanks to its accessible design. The cutting blade can be easily removed and sharpened or replaced, and the engine is equipped with a quick oil-change system to keep it running smoothly. With proper care, users can expect longevity and performance from this reliable lawn mower.

In summary, the Troy-Bilt 30331 is an impressive lawn mower that excels in performance, versatility, and user comfort. With its powerful engine, adjustable cutting deck, ergonomic design, and convenient features, it stands out as an excellent choice for homeowners seeking a dependable and efficient mowing solution.
Top Page Image Contents