Troy-Bilt 30331 manual Engine exhaust from this product contains

Page 5

WARNING

The engine exhaust from this product contains

chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

WARNING

Generator produces hazardous voltage.

Failure to isolate generator from power utility can result in death or injury to electric utility workers due to backfeed of electrical energy.

•When using generator for backup power, notify utility company. Use approved transfer equipment to isolate generator from electric utility.

•Use a ground fault circuit interrupter (GFCI) in any damp or highly conductive area, such as metal decking or steel work.

•DO NOT touch bare wires or receptacles.

•DO NOT use generator with electrical cords which are worn, frayed, bare or otherwise damaged.

•DO NOT operate generator in the rain or wet weather.

•DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet.

•DO NOT allow unqualified persons or children to operate or service generator.

WARNING

Starter cord kickback (rapid retraction) can result in bodily injury. Kickback will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises, or sprains could result.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•NEVER start or stop engine with electrical devices plugged in and turned on.

WARNING

Fuel and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

WHEN ADDING OR DRAINING FUEL

•Turn generator OFF and let it cool at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.

•Fill or drain fuel tank outdoors.

•DO NOT overfill tank. Allow space for fuel expansion.

•If fuel spills, wait until it evaporates before starting engine.

•Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

•DO NOT light a cigarette or smoke.

WHEN STARTING EQUIPMENT

•Ensure spark plug, muffler, fuel cap, and air cleaner are in place.

•DO NOT crank engine with spark plug removed.

WHEN OPERATING EQUIPMENT

•DO NOT tip engine or equipment at angle which causes fuel to spill.

•This generator is not for use in mobile equipment or marine applications.

WHEN TRANSPORTING OR REPAIRING EQUIPMENT

•Transport/repair with fuel tank EMPTY or with fuel shutoff valve OFF.

•Disconnect spark plug wire.

WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN TANK

•Store away from furnaces, stoves, water heaters, clothes dryers, or other appliances that have pilot light or other ignition source because they can ignite fuel vapors.

WARNING

•This generator does not meet U. S. Coast Guard Regulation 33CFR-183 and should not be used on marine applications.

•Failure to use the appropriate U. S. Coast Guard approved generator could result in death or serious injury and/or property damage.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Call Generator Helpline Failure to read and followQuestions? Help is just a moment away Date Purchased Where to Find Us GeneratorEngine Table of Contents Safety Rules Operator SafetyHazard Symbols and Meanings Safety alert symbol is used with a signal wordBroken bones, fractures, bruises, or sprains could result Engine exhaust from this product containsUnintentional sparking can result in fire or electric shock When Testing for Engine SparkContact with muffler area can result in serious burns Shipment Contents AssemblyInstall Wheel Kit Unpack GeneratorAdd Fuel Add Engine OilReplace oil fill cap and fully tighten Fuel must meet these requirementsSystem Ground Connecting to a Building’s Electrical SystemGenerator Location Special RequirementsUsed to supply electrical power for the operation Features and ControlsVolt AC, 20 Amp, Duplex Receptacles May be Oil Drain Plug Drain engine oil hereGenerator Adapter Cord Set Cord Sets and ReceptaclesProperty damage Volt AC, 20 Amp, Duplex ReceptaclesStarting the Engine OperationMove fuel valve to Off position Connecting Electrical LoadsStopping the Engine Wattage Reference Guide Don’t Overload GeneratorGenerator Maintenance MaintenanceMaintenance Schedule Oil Engine MaintenanceService Spark Plug Service Air CleanerInstall spark plug and tighten firmly Service Spark ArresterAir Cooling System Carburetor AdjustmentStorage Troubleshooting Owner’s Warranty Responsibilities Emissions Control System WarrantyClaims and Coverage Exclusions MaintenanceTROY-BILT Portable Generator Owner Warranty Policy 888 Product SpecificationsCommon Service Parts Llame Línea directa del generador Preguntas? La ayuda es justa un momento lejosFecha de compra Dónde encontrarnos GeneradorMotor Seguridad de Operario Resolución de problemas GarantíasMontaje Controles y característicasDescripción del equipo Seguridad de operarioReglas de seguridad Símbolos de peligro y sus significadosCuando Ponga EN Funcionamiento EL Equipo Cuando Anada Combustible O Vacíe EL DepósitoCuando Opere EL Equipo Cuando Transporte O Repare EL EquipoCuando Pruebe LA Bujía DEL Motor Cuando Ajuste O Haga Reparaciones a SU Máquina GeneradorDesembalaje del generador MontajeContenido de la caja Instale el juego de ruedasAgregue combustible Agregar aceite al motorEl combustible debe reunir los siguientes requisitos Gran altitudConexión al sistema eléctrico de un edificio Tierra del sistemaUbicación del generador Requisitos especialesControles y características Tomas eléctricas dobles de 120 V CA y 20 a Juegos de cordones y enchufes conectoresAmps o mayores Juego de cables del adaptador del generadorEncienda el motor OperandoParada del motor Conexión de cargas eléctricasEl motor podría petardear, incendiarse o dañarse Gire la válvula de combustible blanca hasta la posición OffCapacidad No sobrecargar el generadorEjemplo Control de la energíaMantenimiento del Generador MantenimientoPlan de mantenimiento Aceite Recomendaciones sobre el aceite Mantenimiento del MotorComprobación del Nivel de Aceite Adición de Aceite del MotorLimpia B Servicio del depurador de aireServicio del bujía Limpie la Pantalla ApagachispasAjuste del Carburador Limpie e inspeccione el apagachispas de la siguiente maneraSistema de refrigeración de aire Almacenamiento Problemo Causa Accion Resolución de problemasResponsabilidades de la garantía del propietario Garantía del sistema de control de emisionesServicio gratuito Política Para EL Propietario DE Generador Portátil TROY-BILT Servicio común despide Especificaciones del producto

30331 specifications

The Troy-Bilt 30331 is a powerhouse in the world of lawn care, combining advanced technology with user-friendly features to enhance the mowing experience. Designed for homeowners who prioritize efficiency and performance, this lawn mower is packed with features that make lawn maintenance easier and more enjoyable.

One of the standout characteristics of the Troy-Bilt 30331 is its powerful 382cc OHV engine. This engine delivers ample power and torque, making it efficient at tackling tough grass and uneven terrain. The engine is designed for durability and reliability, ensuring that homeowners can depend on it for years of high-quality lawn care.

A key feature of the Troy-Bilt 30331 is its 21-inch cutting deck, which provides a perfect balance between agility and coverage. The cutting deck is equipped with an adjustable height setting, allowing users to choose their desired grass length, ensuring that lawns look pristine after every mow. The mower also utilizes a tri-action system that allows for superior mulching, bagging, and side discharge functionalities. This versatility not only enhances the aesthetics of your lawn but also contributes to overall lawn health.

User comfort and convenience are top priorities in the design of the Troy-Bilt 30331. It comes with ergonomic handles that reduce fatigue during extended use, and its self-propulsion feature allows users to maintain control while effortlessly navigating various terrains. This feature is especially beneficial for those with larger yards or hilly landscapes.

Another innovative technology incorporated in the Troy-Bilt 30331 is its easy-start system. This feature simplifies the starting process, allowing users to get to work quickly without the hassle of traditional pull-start methods. The mower also includes large rear wheels that provide excellent traction and maneuverability, making it easier to handle tight corners and navigate around obstacles.

Maintenance of the Troy-Bilt 30331 is straightforward, thanks to its accessible design. The cutting blade can be easily removed and sharpened or replaced, and the engine is equipped with a quick oil-change system to keep it running smoothly. With proper care, users can expect longevity and performance from this reliable lawn mower.

In summary, the Troy-Bilt 30331 is an impressive lawn mower that excels in performance, versatility, and user comfort. With its powerful engine, adjustable cutting deck, ergonomic design, and convenient features, it stands out as an excellent choice for homeowners seeking a dependable and efficient mowing solution.
Top Page Image Contents