Troy-Bilt 772C0748 manual Systems Indicator Monitor / Hour Meter, Electric PTO Power TAKE-OFF Knob

Page 13

SYSTEMS INDICATOR MONITOR / HOUR METER

Your tractor is equipped with either an hour meter or an ammeter as part of two available system indicator monitors. Locate the monitor on the left side of your dash panel and compare it to both shown in Figure 7.

AMPS

 

 

 

Oil

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Brake

Ammeter

 

 

PTO

 

 

 

Battery

+

 

Oil

Hour Meter

 

 

 

 

 

1/10

 

PTO

 

P

Brake

Figure 7

If the Brake light or PTO light illuminates when attempting to start the unit, proceed as follows:

Brake — Engage the parking brake.

PTO — Move the PTO lever into the disengaged (Blade Stop) position.

It is normal for the Oil light and the Battery light to illuminate while the engine is cranking, but if either illuminates while the engine is running, proceed as follows:

Oil— Stop the tractor immediately and check the crankcase oil level as instructed in the Engine Owner’s Manual included with your unit. Add oil as required.

Battery— If this light illuminate’s while the engine is running, it indicates that the battery is in need of a charge OR that the engine’s charging system is not generating sufficient amperage. Refer to the MAINTENANCE section of this manual for the proper battery charging procedure or have the engine’s charging system checked by a authorized dealer.

On units so equipped, the ammeter measures the electrical output of the engine’s charging system. Under normal operating conditions, with the engine at full throttle, the ammeter’s needle should measure a positive charge.

The hour meter, on units so equipped, operates whenever the engine is running and records the actual hours of tractor operation.

ELECTRIC PTO (POWER

TAKE-OFF) KNOB

To engage the power to the cutting deck or other (separately available) attachments on models so equipped with an electric PTO, pull outward on the PTO knob. Push the PTO knob inward to disengage the power to the cutting deck.

NOTE: The PTO knob must be in the disengaged (Blade Stop) position when starting the engine.

PTO (POWER TAKE-OFF) LEVER

On models equipped with a manual PTO, the PTO lever is located on the left side of the dashboard next to the steering wheel. Move the PTO lever forward to engage the power to the cutting deck or other (separately available) attachments; move the PTO lever rearward to disengage the power.

NOTE: The PTO lever must be in the disengaged (Blade Stop) position when starting the engine.

SEAT ADJUSTMENT LEVER

To adjust the seat forward or backward on units equipped with a quick-adjust seat, slide the seat adjustment lever to the left and reposition the seat to the desired position. Once a comfortable position is found, release the seat adjustment lever to lock the seat in place. Refer to SEAT ADJUSTMENTS in the MAKING ADJUSTMENTS section of this manual for more detailed instructions.

DECK LIFT LEVER

Found on your tractor’s right fender, the deck lift lever is used to change the height of the cutting deck. To use, move the lever to the left, then place in the notch best suited for your application.

CUP HOLDER

The tractor’s cup holder is located on the fender to the left of the seat, just to the rear of the parking brake lever.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operator’s Manual Table of Contents General Operation Important Safe Operation PracticesDo not Slope OperationChildren Towing ServiceModel Description Attachments & AccessoriesSlope Gauge Tractor SET-UP Attaching the Battery CablesAttaching the Steering Wheel Attaching the SeatAttaching the Cutting Deck 54 Deck Installing the PTO/DECK BeltGAS and OIL FILL-UP Idler Pulley Controls Throttle Control Lever Ignition SwitchChoke Control Brake PedalElectric PTO Power TAKE-OFF Knob Systems Indicator Monitor / Hour MeterPTO Power TAKE-OFF Lever Seat Adjustment LeverReverse Caution Mode Safety Interlock SwitchesOperating Your Garden Tractor Cruise Control ButtonTo use the Reverse Caution Mode Setting the Cutting HeightStarting the Engine Stopping the Engine Setting the Cruise ControlEngaging the Parking Brake Driving the TractorOFF Engaging the PTO Using the Lift LeverMowing MulchingHeadlights Making AdjustmentsLeveling the Deck Seat Adjustment Deck Roller Height AdjustmentParking Brake Adjustment Steering AdjustmentCleaning the Engine and Deck MaintenanceEngine LubricationChanging Engine OIL Read and follow instructions carefullyBattery ServiceTires Cutting BladesCharging Battery FailuresJump Starting FusesDeck / PTO Belt Changing the Deck Belt & PTO BeltUpper Drive Belt Changing the Transmission Drive BeltsLower Drive Belt OFF-SEASON StorageTrouble Possible Causes Corrective Action Troubleshooting

772C0748 specifications

The Troy-Bilt 772C0748 is a powerful and versatile rotary lawn mower designed for maintaining a pristine lawn with ease. Known for its durability and efficiency, this model is tailored for homeowners who seek a reliable solution for their mowing needs.

One of the standout features of the Troy-Bilt 772C0748 is its strong engine. Equipped with a robust 159cc engine, this mower delivers impressive cutting performance and allows for efficient operation over a variety of terrains. The engine is designed for easy starting, minimizing the hassle often associated with lawn maintenance.

The mower boasts a 21-inch cutting deck, which offers a balance between maneuverability and cutting width. This size is ideal for residential lawns, allowing users to navigate through narrow paths and tight corners with ease. The cutting deck is made from durable materials, ensuring longevity and resilience against the rigors of outdoor use.

Another notable characteristic of the Troy-Bilt 772C0748 is its adjustable cutting height feature. With six different height settings, users can achieve their desired lawn length with precision. This flexibility is essential for accommodating different grass types and seasonal growth patterns, ensuring a well-maintained lawn throughout the year.

The mower’s design also prioritizes user comfort. It features an ergonomic handle that reduces strain during operation, allowing for longer mowing sessions without discomfort. The handle is also foldable, which not only saves storage space but also enhances portability.

In terms of technology, the Troy-Bilt 772C0748 incorporates a reliable grass collection system. The rear bagging capabilities allow for efficient collection of clippings, which can be easily emptied, promoting a cleaner mowing experience. The mower also has side discharge capabilities, providing options for lawn maintenance according to user preferences.

Overall, the Troy-Bilt 772C0748 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners looking to maintain their lawns effortlessly. Its durable construction, innovative technology, and thoughtful design characteristics position it as a standout option in the competitive lawn mower market. Whether tackling small patches or larger areas, the Troy-Bilt 772C0748 promises to deliver consistent performance and a beautiful, well-groomed lawn.
Top Page Image Contents