Troy-Bilt 772C0748 Operating Your Garden Tractor, Cruise Control Button, Parking Brake Button

Page 14

CRUISE CONTROL

BUTTON

The cruise control button is located on the tractor dash panel to the left of the ignition switch. Push the cruise control button

while traveling forward at a desired speed. While holding the button in, release pressure from the drive pedal. This will engage the cruise control and allow the

tractor to remain at that speed without applying pressure to the drive pedal. Depress the brake pedal or the drive pedal to deactivate cruise control. Refer to OPERATION SECTION of this manual for detailed instructions regarding the cruise control feature.

NOTE: Cruise control can NOT be engaged at the tractor’s fastest ground speed. If the operator should attempt to do so, the tractor will automatically decelerate to the fastest optimal mowing ground speed.

PARKING BRAKE

 

BUTTON

P

To set the parking brake, fully

depress the brake pedal and

 

push the parking brake button in.

 

Hold the button in while taking

 

your foot off the brake pedal. Both

 

the parking button and the brake

 

pedal will then stay depressed.

 

To release the parking brake,

 

depress the brake pedal slightly.

 

The parking brake button will then return to its original position.

NOTE: The parking brake must be set if the operator leaves the seat with the engine running or the engine will automatically shut off.

IMPORTANT: Always set the parking brake when leaving the tractor unattended.

SECTION 6: OPERATING YOUR GARDEN TRACTOR

WARNING: Read, understand, and follow all instructions and warnings on the machine and in this manual before operating.

SAFETY INTERLOCK SWITCHES

This tractor is equipped with a safety interlock system for the protection of the operator. If the interlock system should ever malfunction, do not operate the tractor. Contact an authorized service dealer.

•The safety interlock system prevents the engine from cranking or starting unless the parking brake is engaged, and the PTO (Blade Engage) knob (or lever) is in the disengaged (Blade Stop) position.

•The engine will automatically shut off if the operator leaves the seat before engaging the parking brake.

Models with Manual PTO (Blade Engage)

•The engine will automatically shut off if the operator leaves the tractor’s seat with the PTO (Blade Engage) lever in the engaged (ON) position, regardless of whether the parking brake is engaged.

•With the ignition key in the NORMAL MOWING position, the engine will automatically shut off if the PTO (Blade Engage) lever is moved into the engaged (ON) position with the shift lever in Reverse.

Models with Electric PTO (Blade Engage)

•The electric PTO (Blade Engage) clutch will automatically shut off if the operator leaves the tractor’s seat with the PTO (Blade Engage) knob in the engaged (ON) position, regardless of whether the parking brake is engaged.

WARNING

AVOID SERIOUS INJURY OR DEATH

•GO UP AND DOWN SLOPES, NOT ACROSS.

•AVOID SUDDEN TURNS.

•DO NOT OPERATE THE UNIT WHERE IT COULD SLIP OR TIP.

•IF MACHINE STOPS GOING UPHILL, STOP BLADE(S) AND BACK DOWNHILL SLOWLY.

•DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.

•NEVER CARRY CHILDREN, EVEN WITH BLADES OFF.

•LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING.

•KEEP SAFETY DEVICES (GUARDS, SHIELDS, AND SWITCHES) IN PLACE AND WORKING.

•REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE(S).

•KNOW LOCATION AND FUNCTION OF ALL CONTROLS.

•BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE PLAC- ING HANDS OR FEET NEAR BLADE(S).

•BEFORE LEAVING OPERATOR’S POSITION, DISENGAGE BLADE(S), PLACE THE SHIFT LEVER IN NEUTRAL, ENGAGE BRAKE LOCK, SHUT ENGINE OFF AND REMOVE KEY.

READ OPERATOR’S MANUAL

•With the ignition key in the NORMAL MOWING position, the electric PTO (Blade Engage) clutch will automatically shut off if the PTO (Blade Engage) knob is moved into the engaged (ON) position with the shift lever in Reverse.

WARNING: Do not operate the tractor if the interlock system is malfunctioning. This system was designed for your safety and protection.

REVERSE CAUTION MODE

The REVERSE CAUTION MODE position of the key switch module allows the tractor to be operated in reverse with the blades (PTO) engaged.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s Manual Table of Contents Important Safe Operation Practices General OperationChildren Slope OperationDo not Service TowingAttachments & Accessories Model DescriptionSlope Gauge Attaching the Steering Wheel Attaching the Battery CablesTractor SET-UP Attaching the SeatGAS and OIL FILL-UP Installing the PTO/DECK BeltAttaching the Cutting Deck 54 Deck Idler Pulley Controls Choke Control Ignition SwitchThrottle Control Lever Brake PedalPTO Power TAKE-OFF Lever Systems Indicator Monitor / Hour MeterElectric PTO Power TAKE-OFF Knob Seat Adjustment LeverOperating Your Garden Tractor Safety Interlock SwitchesReverse Caution Mode Cruise Control ButtonStarting the Engine Setting the Cutting HeightTo use the Reverse Caution Mode Engaging the Parking Brake Setting the Cruise ControlStopping the Engine Driving the TractorMowing Using the Lift LeverOFF Engaging the PTO MulchingLeveling the Deck Making AdjustmentsHeadlights Parking Brake Adjustment Deck Roller Height AdjustmentSeat Adjustment Steering AdjustmentMaintenance Cleaning the Engine and DeckChanging Engine OIL LubricationEngine Read and follow instructions carefullyTires ServiceBattery Cutting BladesJump Starting Battery FailuresCharging FusesChanging the Deck Belt & PTO Belt Deck / PTO BeltChanging the Transmission Drive Belts Upper Drive BeltOFF-SEASON Storage Lower Drive BeltTroubleshooting Trouble Possible Causes Corrective Action

772C0748 specifications

The Troy-Bilt 772C0748 is a powerful and versatile rotary lawn mower designed for maintaining a pristine lawn with ease. Known for its durability and efficiency, this model is tailored for homeowners who seek a reliable solution for their mowing needs.

One of the standout features of the Troy-Bilt 772C0748 is its strong engine. Equipped with a robust 159cc engine, this mower delivers impressive cutting performance and allows for efficient operation over a variety of terrains. The engine is designed for easy starting, minimizing the hassle often associated with lawn maintenance.

The mower boasts a 21-inch cutting deck, which offers a balance between maneuverability and cutting width. This size is ideal for residential lawns, allowing users to navigate through narrow paths and tight corners with ease. The cutting deck is made from durable materials, ensuring longevity and resilience against the rigors of outdoor use.

Another notable characteristic of the Troy-Bilt 772C0748 is its adjustable cutting height feature. With six different height settings, users can achieve their desired lawn length with precision. This flexibility is essential for accommodating different grass types and seasonal growth patterns, ensuring a well-maintained lawn throughout the year.

The mower’s design also prioritizes user comfort. It features an ergonomic handle that reduces strain during operation, allowing for longer mowing sessions without discomfort. The handle is also foldable, which not only saves storage space but also enhances portability.

In terms of technology, the Troy-Bilt 772C0748 incorporates a reliable grass collection system. The rear bagging capabilities allow for efficient collection of clippings, which can be easily emptied, promoting a cleaner mowing experience. The mower also has side discharge capabilities, providing options for lawn maintenance according to user preferences.

Overall, the Troy-Bilt 772C0748 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners looking to maintain their lawns effortlessly. Its durable construction, innovative technology, and thoughtful design characteristics position it as a standout option in the competitive lawn mower market. Whether tackling small patches or larger areas, the Troy-Bilt 772C0748 promises to deliver consistent performance and a beautiful, well-groomed lawn.
Top Page Image Contents