Troy-Bilt 772C0748 Tractor SET-UP, Attaching the Battery Cables, Attaching the Steering Wheel

Page 8

SECTION 4: TRACTOR SET-UP

NOTE: Reference to RIGHT or LEFT side of the tractor in this manual is observed from operator’s position.

ATTACHING THE BATTERY CABLES

NOTE: The battery cables may or may not be attached on your unit. If the cables are not attached, please follow the instructions below.

NOTE: The positive battery terminal is marked Pos.

(+). The negative battery terminal is marked Neg. (–).

•The positive cable (heavy red wire) is secured to the positive battery terminal (+) with a hex bolt and hex nut at the factory. Make certain that the rubber boot covers the terminal to help protect it from corrosion.

•Remove the hex bolt and wing nut from the negative cable.

•Remove the black plastic cover, if present, from the negative battery terminal and attach the negative cable (heavy black wire) to the negative battery terminal (–) with the bolt and wing nut.

•Make certain the battery retainer rod is in position over the battery, securing it in place. See Figure 1.

Rubber

 

 

Boot

Battery

Positive

 

 

Terminal

 

 

Wing

 

 

Nut

 

 

Negative

 

Battery

Terminal

Shoulder Bolt

Retainer Rod

Figure 1

NOTE: If the battery is put into service after the date shown on top of battery, charge the battery as instructed on page 23 of this manual prior to operating the tractor.

ATTACHING THE STEERING WHEEL

In the event your tractor was crated with the steering wheel and the seat removed for shipping reasons, use the following instructions to properly assemble the parts.

WARNING: Do NOT operate the tractor without first attaching both the steering wheel AND the seat. Doing so could result in serious injury to the operator.

NOTE: There are two different styles of steering wheel cap. See Figure 2. Styles vary by model.

•Using your hands, place the tractor’s front tires in position for straight-ahead travel.

•Remove the steering wheel cap from the center of the steering wheel. Be careful not to lose the hex screw and cupped washer found beneath it.

•Place the steering wheel (in position for straight- ahead travel) directly onto the steering shaft found in the center of the tractor’s dash.

•Place the cupped washer (cupped side DOWN) over the steering shaft.

•Thread the hex screw into the steering shaft and tighten securely.

•Reinsert the steering wheel cap in the center of the steering wheel. Refer to Figure 2.

Steering

Wheel Cap

Hex Bolt

& Washer

Steering

Shaft

Figure 2

ATTACHING THE SEAT

NOTE: For shipping reasons, seats are either fastened to the tractor seat’s pivot bracket with a plastic tie, or mounted backward to the pivot bracket. In either case, free the seat from its shipping position and remove the two hex screws (or knobs, on models so equipped) from the bottom of seat before proceeding with applicable instructions below.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operator’s Manual Table of Contents Important Safe Operation Practices General OperationChildren Slope OperationDo not Service TowingAttachments & Accessories Model DescriptionSlope Gauge Attaching the Battery Cables Tractor SET-UPAttaching the Steering Wheel Attaching the SeatGAS and OIL FILL-UP Installing the PTO/DECK BeltAttaching the Cutting Deck 54 Deck Idler Pulley Controls Ignition Switch Throttle Control LeverChoke Control Brake PedalSystems Indicator Monitor / Hour Meter Electric PTO Power TAKE-OFF KnobPTO Power TAKE-OFF Lever Seat Adjustment LeverSafety Interlock Switches Reverse Caution ModeOperating Your Garden Tractor Cruise Control ButtonStarting the Engine Setting the Cutting HeightTo use the Reverse Caution Mode Setting the Cruise Control Stopping the EngineEngaging the Parking Brake Driving the TractorUsing the Lift Lever OFF Engaging the PTOMowing MulchingLeveling the Deck Making AdjustmentsHeadlights Deck Roller Height Adjustment Seat AdjustmentParking Brake Adjustment Steering AdjustmentMaintenance Cleaning the Engine and DeckLubrication EngineChanging Engine OIL Read and follow instructions carefullyService BatteryTires Cutting BladesBattery Failures ChargingJump Starting FusesChanging the Deck Belt & PTO Belt Deck / PTO BeltChanging the Transmission Drive Belts Upper Drive BeltOFF-SEASON Storage Lower Drive BeltTroubleshooting Trouble Possible Causes Corrective Action

772C0748 specifications

The Troy-Bilt 772C0748 is a powerful and versatile rotary lawn mower designed for maintaining a pristine lawn with ease. Known for its durability and efficiency, this model is tailored for homeowners who seek a reliable solution for their mowing needs.

One of the standout features of the Troy-Bilt 772C0748 is its strong engine. Equipped with a robust 159cc engine, this mower delivers impressive cutting performance and allows for efficient operation over a variety of terrains. The engine is designed for easy starting, minimizing the hassle often associated with lawn maintenance.

The mower boasts a 21-inch cutting deck, which offers a balance between maneuverability and cutting width. This size is ideal for residential lawns, allowing users to navigate through narrow paths and tight corners with ease. The cutting deck is made from durable materials, ensuring longevity and resilience against the rigors of outdoor use.

Another notable characteristic of the Troy-Bilt 772C0748 is its adjustable cutting height feature. With six different height settings, users can achieve their desired lawn length with precision. This flexibility is essential for accommodating different grass types and seasonal growth patterns, ensuring a well-maintained lawn throughout the year.

The mower’s design also prioritizes user comfort. It features an ergonomic handle that reduces strain during operation, allowing for longer mowing sessions without discomfort. The handle is also foldable, which not only saves storage space but also enhances portability.

In terms of technology, the Troy-Bilt 772C0748 incorporates a reliable grass collection system. The rear bagging capabilities allow for efficient collection of clippings, which can be easily emptied, promoting a cleaner mowing experience. The mower also has side discharge capabilities, providing options for lawn maintenance according to user preferences.

Overall, the Troy-Bilt 772C0748 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners looking to maintain their lawns effortlessly. Its durable construction, innovative technology, and thoughtful design characteristics position it as a standout option in the competitive lawn mower market. Whether tackling small patches or larger areas, the Troy-Bilt 772C0748 promises to deliver consistent performance and a beautiful, well-groomed lawn.
Top Page Image Contents