Westinghouse W-019 1/15/04 Mounting and Wiring Instructions, Fixture Assembly Instructions

Page 4

MOUNTING AND WIRING INSTRUCTIONS

CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible electric shock.

2.Thread mounting screws (A) into the universal mounting plate (B) (see figure 1).

3.Secure universal mounting plate (B) to outlet box (C) with outlet box screws (D). NOTE: Mounting screws must be level for fixture to hang straight.

4.Identify color coding of fixture wires (see figure 2 on page 11).

5.To connect wires, take black fixture wire (group A from figure 2) and place evenly against black outlet box wire. Do not twist wires.

6.Fit wire connector (E) from figure 1 over wires and twist until there is a firm connection. If wire connector (E) easily comes off, reattach wire connector (E) and check again for a firm connection (see figure 1).

7.Repeat steps 5 and 6 with the white (group B from figure 2) fixture wire and outlet box wires.

8.Partially thread green grounding screw (F) into side hole (G) on universal mounting plate

(B)(see figure 1).

9.Wrap ground wire from fixture and ground wire (metal or green wire) from outlet box (C) around green grounding screw (F) on universal mounting plate (B).

10.Tighten grounding screw (F). Do not over tighten.

11.Tuckwires inside outlet box (B) (see figure 1).

FIXTURE ASSEMBLY INSTRUCTIONS

1.Place back plate (H) over mounting screws (A) (see figure 1).

2.Secure into place with cap nuts (I).

3.Install lamp(s). Do not exceed recommended wattage.

4.Turn power back on at circuit box.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Outdoor Lighting Fixture Installation Instructions Warranty Information Electrical Shock can Result in Serious InjuryNot Supplied Mounting and Wiring Instructions Fixture Assembly InstructionsGarantie Limitée DE Cinq ANS Les instructions d’installation demeurent cependant valables Instructions DE Montage ET DE Raccordement Instructions D’ASSEMBLAGE DE Lappareil DéclairageGarantía Limitada DE Cinco Años Advertencia UNA Descarga Eléctrica Podría Causar LesionesFigura Instrucciones DE Montaje Y Cableado Instrucciones DE Montaje DEL ArtefactoMise EN Garde AdvertenciaCleaning and Care Commande DE PiècesOrdering Parts Nettoyage ET Entretien

W-019 1/15/04 specifications

The Westinghouse W-019, introduced on January 15, 2004, is a remarkable piece of technology that signifies advancements in energy production and management. As a part of Westinghouse’s well-established reputation in the nuclear power industry, the W-019 model showcases innovative features and characteristics that meet the demands of modern energy requirements.

One of the standout features of the Westinghouse W-019 is its enhanced safety systems. The reactor design incorporates a series of passive safety measures that require minimal human intervention and ensure the stability of operations, even under adverse conditions. This addresses the growing concerns surrounding nuclear safety and aims to provide a greater assurance for operators and the public alike.

Furthermore, the W-019 is built on the company’s proprietary AP1000 technology, which optimizes efficiency and sustainability. The design boasts a streamlined construction process, reducing both time and cost during the plant build phase. The modular design allows for factory-fabricated components, enhancing quality control and speeding up assembly on-site, which is crucial in meeting modern energy demands.

In terms of operational efficiency, the Westinghouse W-019 promises superior performance. It is capable of achieving a net electrical output that ensures a substantial contribution to a balanced energy portfolio. Coupled with advanced digital instrumentation and control systems, the model provides operators with more precise management of the reactor and support for real-time decision-making.

In addition to its efficiency, the Westinghouse W-019 is designed to integrate seamlessly with renewable energy sources, supporting a transition towards more sustainable energy practices. The potential for hybrid systems enables the co-utilization of nuclear and renewable sources, optimizing energy output while minimizing environmental impact.

The W-019 also offers unique characteristics in containment design, featuring robust structures that withstand natural disasters and other external threats. This aspect of the design underscores a commitment to safeguarding against a broad spectrum of risks, promoting a more resilient energy infrastructure.

In summary, the Westinghouse W-019 represents a crucial evolution in nuclear technology. With its focus on safety, operational efficiency, and resilience, it embodies the principles of modern energy production while addressing global sustainability goals. By harnessing advanced technology and innovative design, the W-019 is poised to contribute significantly to the future of energy generation.
Top Page Image Contents