TROUBLESHOOTING
BELT CONDITIONS
PROBLEM | POSSIBLE CAUSE | SOLUTION |
|
|
|
Belt slippage | Mower overloading; material too | Reduce tractor ground speed but |
| tall or heavy | maintain full PTO rpm. |
|
| Cut material twice, one high pass and |
|
| then mow at desired height. |
|
| Cut 90 degrees to first pass. |
| Oil on belt from | Be careful not to |
|
| lubricant from belt and pulleys with |
|
| clean rag. |
|
| Replace |
| Belt hung up or rubbing | Check belt position in pulleys and |
|
| idlers. |
|
| Check belt for free travel in pulleys. |
|
| Check under mower and around |
|
| blade spindle shaft for wire, rags, or |
|
| other foreign material. |
|
| Clean all material from under mower. |
|
|
|
Frayed edges on belt cover | Belt misaligned | |
|
| rub any other part while running. |
| Pulley misaligned | Inspect to ensure belt is running in |
|
| center of backside idler. |
|
| Shim idler as necessary to align. |
|
|
|
Belt rollover | Pulley misaligned | |
| Damaged belt | Replace belt*. |
| Foreign object in pulley groove | Inspect all pulley grooves for rust, |
|
| paint, or weld spots and remove. |
| Worn pulley groove | Replace pulley. |
|
|
|
Damaged belt | Rollover, high shock loads or | Replace belt*. |
| installation damaged |
|
|
|
|
Belt breakage | High shock loads | Avoid abusive mowing. |
|
| Avoid hitting the ground or large |
|
| obstructions. |
| Belt came off drive | Check pulleys for foreign material in |
|
| grooves. |
|
| Avoid hitting solid objects or ground. |
|
|
|
*Check belt for damage by laying it flat on the floor. A belt that does not lie flat (has humps or twists, indicating broken or stretched cords) must be replaced.
MAN0765 (12/5/2008) | Owner Service 23 |
|
|