Starting Engine, Cold Weather Starting Tips

STARTING ENGINE

Do not run engine indoors. Exhaust gases con- tain carbon monoxide, an odorless and deadly poi- son.

To enhance starter life, use short starting cycles not exceeding 10 seconds. If engine does not start within 10 seconds, stop cranking for 30 seconds; then repeat starting procedures.

1.Position yourself on the power unit seat.

2.Place steering control handles in the NEUTRAL position (pivoted outward).

3.Place PTO switch in the “OFF” position (down).

4.Place throttle approximately 1/3 open.

5.Turn key counter-clockwise to “PRE-HEAT” the glow plugs.

NOTE: Standard pre-heating time is 5 to 10 sec- onds. Pre-heat is not required if engine has been running and warmed up.

6.Turn key to “START”. Release key immediately when engine starts.

7.Ensure that the oil pressure light is off.

8.Warm up engine several minutes at medium throttle.

NOTE: Allow engine a warm-up period regardless of the season. Loading a cold engine will shorten its life.

If engine does not start after refueling or has been sit- ting for a prolonged period, refer to “bleeding the fuel system” in the engine manual.

COLD WEATHER STARTING TIPS

1.Use proper oil grade for temperature expected. (Refer to engine manual for oil grade.)

2.Set throttle half way open.

3.A warm battery has better starting capacity than a cold one.

4.Use fresh fuel (winter grade for diesel model); it is better for starting than leftover fuel.

STARTING MOWER OR ATTACHMENT

Make sure people and objects are clear of attachment and discharge area before engaging PTO.

NOTICE

■Never engage PTO if the mower blades are plugged with grass or other material. This may cause damage to the electric clutch.

1.With engine running, position throttle at half speed.

2.Engage PTO by pulling up on the PTO switch.

3.Move throttle to full speed and begin operation.

NOTE: Starting attachment at lower engine speed will help prolong the life of the clutch and transmission components.

STOPPING MOWER OR ATTACHMENT

Push down on PTO switch.

NOTE: If attachment does not stop in five seconds, the unit requires service.

PRACTICE OPERATION

Never allow children or untrained persons to operate equipment.

Operating this unit is not difficult once you are familiar with the use of the controls. Equip the power unit with the attachment you will be using and practice in a flat open area at half throttle setting until you are comfort- able with the controls.

Do not operate attachment until you become proficient with controls.

UNEVEN TERRAIN OPERATION

Uneven terrain could overturn the machine.

Do not operate on slopes greater than 15 degrees (27% grade).

Do not stop, start, or change directions sud- denly on slopes.

Use extreme care and reduce ground speed on slopes and rough terrain.

Watch for hidden hazards on the terrain during operation.

Installation of a grasscatcher assembly will reduce the stability and maneuverability of the Mow'n Machine when operating on sloping terrain.

MAN0646 (7/6/2007)	Operation 13

FZ25D specifications

The Woods Equipment FZ25D is a versatile and powerful piece of machinery designed for professional landscapers and grounds maintenance operations. This compact yet robust zero-turn mower boasts a range of features that make it ideal for tackling various mowing tasks efficiently and effectively.

One of the standout features of the FZ25D is its powerful engine. Equipped with a reliable engine, it ensures excellent performance and reliability during operation. With a horsepower rating that enhances its cutting power, the FZ25D can easily handle tough grass and uneven terrains, providing a smooth and immaculate finish to manicured lawns.

The zero-turn capability of the FZ25D is another significant advantage, allowing for unparalleled maneuverability. It features a dual-hydrostatic transmission that offers quick and responsive turns, enabling operators to navigate around obstacles, flower beds, and tight corners with ease. This capability reduces mowing time and increases productivity, making it a preferred choice for professionals.

The mower deck of the Woods Equipment FZ25D is designed for optimal cutting performance, featuring a durable construction that withstands rigorous use. Its cutting width allows for a large mowing area covered in a single pass, ensuring efficiency in operation. Additionally, the cutting height can be easily adjusted to suit various grass types and conditions, providing flexibility for different mowing scenarios.

Comfort is paramount in the design of the FZ25D. The operator station is ergonomically designed, offering a comfortable seating position with excellent visibility. The controls are intuitively placed, making it easy for operators to manage their mowing tasks without unnecessary strain. Furthermore, the mower is designed with vibration dampening technology to reduce operator fatigue, allowing for extended periods of use.

Maintenance is straightforward with the Woods Equipment FZ25D due to its easily accessible components. Users can quickly perform routine checks and necessary servicing, ensuring the mower remains in optimal working condition.

In summary, the Woods Equipment FZ25D combines power, maneuverability, and comfort, making it an excellent choice for landscaping professionals. Its advanced features, including a robust engine, zero-turn capability, durable cutting deck, and ergonomic design, cater to the demands of both commercial and residential mowing tasks, providing unmatched efficiency and performance.