Woods Equipment FZ25D manual Safety Rules, Training, Preparation

Page 5

SAFETY RULES

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by an operator’s single careless act.

In addition to the design and configuration of equipment, hazard control and accident preven- tion are dependent upon the awareness, con- cern, judgement, and proper training of personnel involved in the operation, transport, maintenance, and storage of equipment.

It has been said, “The best safety device is an informed, careful operator.” We ask you to be that kind of operator.

TRAINING

„Safety instructions are important! Read all attachment and power unit manuals; follow all safety rules and safety decal information. (Replace- ment manuals and safety decals are available from your dealer. To locate your nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and Canada call 1-800-319- 6637.) Failure to follow instructions or safety rules can result in serious injury or death.

„Data indicates that those operators age 60 years and above are involved in a large percentage of riding mower-related injuries. Those operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from injury.

„If you do not understand any part of this manual and need assistance, see your dealer.

„Know your controls and how to stop engine and attachment quickly in an emergency.

„Operators must be instructed in and be capable of the safe operation of the equipment, its attach- ments, and all controls. Do not allow anyone to operate this equipment without proper instructions.

„Never allow children or untrained persons to operate equipment.

PREPARATION

„Check that all hardware is properly installed. Always tighten to torque chart specifications unless instructed otherwise in this manual.

„Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

„Make sure attachment is properly secured, adjusted, and in good operating condition.

„Make sure spring-activated locking pin or collar slides freely and is seated firmly in tractor PTO spline groove.

„The safety interlock system was installed for your protection. Do not disconnect, disable, over- ride, or execute any action that would cause this system to malfunction. If malfunction occurs, stop all operation and contact dealer for repair.

„Remove accumulated debris from this equip- ment, power unit, and engine to avoid fire hazard.

„Keep children out of the mowing area and under the watchful care of a responsible adult other than the operator.

„Make sure all safety decals are installed. Replace if damaged. (See Safety Decals section for location.)

„Make sure shields and guards are properly installed and in good condition. Replace if damaged.

„Be sure either the discharge chute, mulching end cap, or complete vacuum attachment is installed and in good condition. Replace if dam- aged.

„Inspect and clear area of stones, branches, or other hard objects that might be thrown, causing injury or damage.

„The machine is not intended for highway or street use.

„Do not mow on wet grass.

„While fueling, extinguish all cigarettes, cigars, pipes, and other sources of ignition.

„Never fuel the machine indoors.

(Safety Rules continued on next page)

FE-Series Mow”n Machine (12/23/2005)

Safety 5

Image 5
Contents MOW’N Machine To the Dealer IntroductionTable of Contents General Information SpecificationsSafety Rules SafetyTraining PreparationOperation TransportationMaintenance Storage Replace Immediately If Damaged Safety & Instructional DecalsBe Careful Operation OperationDeck HEIGHT/POWER Tilt Adjustment Switch Controls and SwitchesBrake & Temperature Lights Safety Switch SystemCold Weather Starting Tips Starting EngineStarting Mower or Attachment Stopping Mower or AttachmentSteering Handle Positions Steering Handle OperationMoving Disabled Power Unit Weight TransferStopping Engine Manual Fuel Shut-Off ValveOwners Responsibility Owner PRE-OPERATION Check ListOwner Service Owner ServiceEngine Service Radiator and PrescreenTailwheel Maintenance Lubrication Service IntervalsHydraulic Transmission Change OIL & Filter Hydrostatic Transmission ServiceBattery Service Clutch Burnishing CleaningReturn to Operation After Each UseTroubleshooting Hydrostatic Pump Dealer ServiceDealer Service Engine Dies when Steering Handles are Engaged Troubleshooting EngineHydrostatic Pump & Belt Removal Troubleshooting Deck Safety SwitchHydrostatic Pump Installation PTO Belt Removal Parking Brake AdjustmentEngine Removal Solenoid TestReassemble Components Install ClutchAlign Belt Clutch & Drive Components Reassembled Assembly AssemblyInstall Drive Tires Adjust Steering HandlesStraight Line Travel Install Single Tailwheel OptionalDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListMAN0646 Rev /5/2007 Parts FZ25DFZ25D Frame Assembly Part QTY Description FZ25D Frame Assembly Parts ListFZ25D Engine Assembly REF Part QTY Description FZ25D Engine Assembly Parts ListHydraulic Reservoir & Hoses Hydraulic Diagram Hydraulic Reservoir & Hoses Parts ListPTO, Clutch & Pump Assembly PTO Clutch & Pump Assembly Parts List Seat & Hood Assembly Single Tailwheel Assembly Wide Stance Tailwheel Assembly Tailwheel AssemblyBrake Assembly Tire & Wheel Chart Brake Assembly Parts ListFZ25D Wiring Diagram Kubota FZ25D Wiring Diagram Kubota Diesel Steering Assembly Counterweight Mount KIT Headlight KIT Optional SAE Series Torque Chart Bolt Torque ChartAppendix Metric SeriesAbbreviations Bolt Size ChartIndex IndexLimited Warranty Mow’n MachineTM Zero-Turn Mower Replacement Parts Woods Equipment Company

FZ25D specifications

The Woods Equipment FZ25D is a versatile and powerful piece of machinery designed for professional landscapers and grounds maintenance operations. This compact yet robust zero-turn mower boasts a range of features that make it ideal for tackling various mowing tasks efficiently and effectively.

One of the standout features of the FZ25D is its powerful engine. Equipped with a reliable engine, it ensures excellent performance and reliability during operation. With a horsepower rating that enhances its cutting power, the FZ25D can easily handle tough grass and uneven terrains, providing a smooth and immaculate finish to manicured lawns.

The zero-turn capability of the FZ25D is another significant advantage, allowing for unparalleled maneuverability. It features a dual-hydrostatic transmission that offers quick and responsive turns, enabling operators to navigate around obstacles, flower beds, and tight corners with ease. This capability reduces mowing time and increases productivity, making it a preferred choice for professionals.

The mower deck of the Woods Equipment FZ25D is designed for optimal cutting performance, featuring a durable construction that withstands rigorous use. Its cutting width allows for a large mowing area covered in a single pass, ensuring efficiency in operation. Additionally, the cutting height can be easily adjusted to suit various grass types and conditions, providing flexibility for different mowing scenarios.

Comfort is paramount in the design of the FZ25D. The operator station is ergonomically designed, offering a comfortable seating position with excellent visibility. The controls are intuitively placed, making it easy for operators to manage their mowing tasks without unnecessary strain. Furthermore, the mower is designed with vibration dampening technology to reduce operator fatigue, allowing for extended periods of use.

Maintenance is straightforward with the Woods Equipment FZ25D due to its easily accessible components. Users can quickly perform routine checks and necessary servicing, ensuring the mower remains in optimal working condition.

In summary, the Woods Equipment FZ25D combines power, maneuverability, and comfort, making it an excellent choice for landscaping professionals. Its advanced features, including a robust engine, zero-turn capability, durable cutting deck, and ergonomic design, cater to the demands of both commercial and residential mowing tasks, providing unmatched efficiency and performance.