Woods Equipment FZ25D manual Install Clutch, Align Belt, Reassemble Components

Page 25

A.Clutch spacer

2. PTO Sheave

6.3/8 NC x 1-3/4 HHCS GR5

8.3/8 Lock washer

16.Cable, clutch stop

19.Electric clutch, mag-stop 1-1/8

20.13/32 x 1-1/2 Retaining washer

21.3/8 NF x 1-1/4 HHCS GR8

22.PTO V-belt set, matched

Figure 15. Clutch Assembly

3.Place a 9/16 wrench over cap screw (6) on idler

(47)and remove the tension from PTO V-belts (22) by rotating the wrench clockwise.

4.Remove PTO V-belts (22) from PTO drive sheave

(2).

5.Disconnect electrical wire harness from clutch.

6.Disconnect clutch cable (16) from clutch.

7.Remove cap screw (21), lock washer (8) and retaining washer (20) from end of clutch.

8.Remove clutch (19) and clutch spacer (A) from engine shaft.

Install Clutch

1.Install clutch spacer (A) over engine shaft with the chamfer side towards the engine. See Figure 16.

A

DP10

Figure 16. Clutch Spacer Installed

2.Install clutch onto engine shaft.

3.Secure clutch to engine shaft using 3/8 NF cap screw GR8 (21) and lock washer (8) previously removed (Figure 15).

NOTE: Place a drop of Loctite® 242 (blue) on threads of cap screw before installing.

4.Torque Grade 8 cap screw (21) to 40 lbs-ft.

5.Check belt alignment and if necessary adjust PTO sheave on shaft. See .

NOTE: If belt alignment is not necessary, proceed to Reassemble Components.

2.PTO sheave

13.1/4 NC x 3/4 HHCS GR5

19.Electric clutch, mag- stop 1-1/8

46. Taper lock

Figure 17. Align Clutch & PTO Sheave

Align Belt

6.Loosen the taper bolts (13), adjust sheave (2), and tighten bolts to 85 lbs-inch.

Reassemble Components

1.Install PTO V-belts (22) over PTO sheave (2) and clutch (19).

2.Attach clutch cable (16) to clutch (19) using hardware previously removed. Make sure nut is inside of loop of cable and between washers. Cable must pivot freely, (see Figure 15).

3.Attach electrical wiring harness to clutch.

4.Replace counterweights if removed.

MAN0646 (Rev. 11/5/2007)

Dealer Service 25

 

 

Image 25
Contents MOW’N Machine To the Dealer IntroductionTable of Contents General Information SpecificationsSafety Rules SafetyTraining PreparationOperation TransportationMaintenance Storage Replace Immediately If Damaged Safety & Instructional DecalsBe Careful Operation OperationDeck HEIGHT/POWER Tilt Adjustment Switch Controls and SwitchesBrake & Temperature Lights Safety Switch SystemCold Weather Starting Tips Starting EngineStarting Mower or Attachment Stopping Mower or AttachmentSteering Handle Positions Steering Handle OperationMoving Disabled Power Unit Weight TransferStopping Engine Manual Fuel Shut-Off ValveOwners Responsibility Owner PRE-OPERATION Check ListOwner Service Owner ServiceEngine Service Radiator and PrescreenTailwheel Maintenance Lubrication Service IntervalsBattery Service Hydrostatic Transmission ServiceHydraulic Transmission Change OIL & Filter Clutch Burnishing CleaningReturn to Operation After Each UseDealer Service Dealer ServiceTroubleshooting Hydrostatic Pump Engine Dies when Steering Handles are Engaged Troubleshooting EngineHydrostatic Pump Installation Troubleshooting Deck Safety SwitchHydrostatic Pump & Belt Removal PTO Belt Removal Parking Brake AdjustmentEngine Removal Solenoid TestAlign Belt Install ClutchReassemble Components Clutch & Drive Components Reassembled Assembly AssemblyInstall Drive Tires Adjust Steering HandlesStraight Line Travel Install Single Tailwheel OptionalDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListMAN0646 Rev /5/2007 Parts FZ25DFZ25D Frame Assembly Part QTY Description FZ25D Frame Assembly Parts ListFZ25D Engine Assembly REF Part QTY Description FZ25D Engine Assembly Parts ListHydraulic Reservoir & Hoses Hydraulic Diagram Hydraulic Reservoir & Hoses Parts ListPTO, Clutch & Pump Assembly PTO Clutch & Pump Assembly Parts List Seat & Hood Assembly Single Tailwheel Assembly Wide Stance Tailwheel Assembly Tailwheel AssemblyBrake Assembly Tire & Wheel Chart Brake Assembly Parts ListFZ25D Wiring Diagram Kubota FZ25D Wiring Diagram Kubota Diesel Steering Assembly Counterweight Mount KIT Headlight KIT Optional SAE Series Torque Chart Bolt Torque ChartAppendix Metric SeriesAbbreviations Bolt Size ChartIndex IndexLimited Warranty Mow’n MachineTM Zero-Turn Mower Replacement Parts Woods Equipment Company

FZ25D specifications

The Woods Equipment FZ25D is a versatile and powerful piece of machinery designed for professional landscapers and grounds maintenance operations. This compact yet robust zero-turn mower boasts a range of features that make it ideal for tackling various mowing tasks efficiently and effectively.

One of the standout features of the FZ25D is its powerful engine. Equipped with a reliable engine, it ensures excellent performance and reliability during operation. With a horsepower rating that enhances its cutting power, the FZ25D can easily handle tough grass and uneven terrains, providing a smooth and immaculate finish to manicured lawns.

The zero-turn capability of the FZ25D is another significant advantage, allowing for unparalleled maneuverability. It features a dual-hydrostatic transmission that offers quick and responsive turns, enabling operators to navigate around obstacles, flower beds, and tight corners with ease. This capability reduces mowing time and increases productivity, making it a preferred choice for professionals.

The mower deck of the Woods Equipment FZ25D is designed for optimal cutting performance, featuring a durable construction that withstands rigorous use. Its cutting width allows for a large mowing area covered in a single pass, ensuring efficiency in operation. Additionally, the cutting height can be easily adjusted to suit various grass types and conditions, providing flexibility for different mowing scenarios.

Comfort is paramount in the design of the FZ25D. The operator station is ergonomically designed, offering a comfortable seating position with excellent visibility. The controls are intuitively placed, making it easy for operators to manage their mowing tasks without unnecessary strain. Furthermore, the mower is designed with vibration dampening technology to reduce operator fatigue, allowing for extended periods of use.

Maintenance is straightforward with the Woods Equipment FZ25D due to its easily accessible components. Users can quickly perform routine checks and necessary servicing, ensuring the mower remains in optimal working condition.

In summary, the Woods Equipment FZ25D combines power, maneuverability, and comfort, making it an excellent choice for landscaping professionals. Its advanced features, including a robust engine, zero-turn capability, durable cutting deck, and ergonomic design, cater to the demands of both commercial and residential mowing tasks, providing unmatched efficiency and performance.