Woods Equipment FZ25D manual Owner PRE-OPERATION Check List, Owners Responsibility

Page 16

OWNER PRE-OPERATION CHECK LIST

(OWNER'S RESPONSIBILITY)

___ Review and follow all safety rules and safety decal instructions on pages 5 through 10.

___ Check that all safety decals are installed and in good condition. Replace if damaged.

___ Check to make sure all shields and guards are properly installed and in good condition. Be sure that either the discharge shield or complete vac- uum attachment is installed.

___ Check that all hardware and cotter pins are prop- erly installed and secured.

___ Check that equipment is properly and securely attached to power unit.

___ Make sure driveline spring-activated locking pin or collar slides freely and is seated firmly in power unit PTO spline groove and in gearbox spline groove.

___ Check for grass wrap on PTO shaft. When mow- ing long grass, remove key and check for grass wrap around PTO shaft every 30 minutes of oper- ation.

___ Check to be sure engine is free of dirt and debris. Pay particular attention to the cooling fins, gover- nor parts and muffler.

___ Do not allow riders.

___ Inspect area and remove stones, branches or other hard objects that might be thrown, causing injury or damage.

___ Clean air intake screen. Check air cleaner; ser- vice if necessary.

___ Clean area around oil fill dipstick. Remove dip- stick and check to be sure oil is in operating range (between marks on dipstick). Add oil if nec- essary but Do Not Overfill. Install dipstick assembly firmly until cap bottoms out on tube. Dipstick assembly must always be secured into fill tube when engine is running. Avoid touching exhaust manifold if unit has been running.

___ Check all lubrication points and grease as instructed. See “Lubrication Service Intervals” on

 

page 18.

___

Check hydrostatic fluid level (refer to Owner Ser-

 

vice section). Check to be sure cooling fins on

 

hydrostat are clean.

___

Perform a functional check of the safety interlock

 

system each time you operate the unit. Place

 

both steering levers outward, start engine,

 

engage PTO and then rise up out of the seat; the

 

engine should die. If it does not, do not operate

 

unit until the safety interlock system has been

 

repaired and operates properly.

 

™

16 Operation

MAN0646 (7/6/2007)

 

 

Image 16
Contents MOW’N Machine Introduction To the DealerTable of Contents Specifications General InformationSafety Safety RulesTraining PreparationTransportation OperationMaintenance Storage Safety & Instructional Decals Replace Immediately If DamagedBe Careful Operation OperationControls and Switches Deck HEIGHT/POWER Tilt Adjustment SwitchBrake & Temperature Lights Safety Switch SystemStarting Engine Cold Weather Starting TipsStarting Mower or Attachment Stopping Mower or AttachmentSteering Handle Operation Steering Handle PositionsWeight Transfer Moving Disabled Power UnitStopping Engine Manual Fuel Shut-Off ValveOwner PRE-OPERATION Check List Owners ResponsibilityOwner Service Owner ServiceEngine Service Radiator and PrescreenLubrication Service Intervals Tailwheel MaintenanceBattery Service Hydrostatic Transmission ServiceHydraulic Transmission Change OIL & Filter Cleaning Clutch BurnishingReturn to Operation After Each UseDealer Service Dealer ServiceTroubleshooting Hydrostatic Pump Troubleshooting Engine Engine Dies when Steering Handles are EngagedHydrostatic Pump Installation Troubleshooting Deck Safety SwitchHydrostatic Pump & Belt Removal Parking Brake Adjustment PTO Belt RemovalEngine Removal Solenoid TestAlign Belt Install ClutchReassemble Components Clutch & Drive Components Reassembled Assembly AssemblyInstall Drive Tires Adjust Steering HandlesInstall Single Tailwheel Optional Straight Line TravelDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListMAN0646 Rev /5/2007 FZ25D PartsFZ25D Frame Assembly FZ25D Frame Assembly Parts List Part QTY DescriptionFZ25D Engine Assembly FZ25D Engine Assembly Parts List REF Part QTY DescriptionHydraulic Reservoir & Hoses Hydraulic Reservoir & Hoses Parts List Hydraulic DiagramPTO, Clutch & Pump Assembly PTO Clutch & Pump Assembly Parts List Seat & Hood Assembly Tailwheel Assembly Single Tailwheel Assembly Wide Stance Tailwheel AssemblyBrake Assembly Brake Assembly Parts List Tire & Wheel ChartFZ25D Wiring Diagram Kubota FZ25D Wiring Diagram Kubota Diesel Steering Assembly Counterweight Mount KIT Headlight KIT Optional Bolt Torque Chart SAE Series Torque ChartAppendix Metric SeriesBolt Size Chart AbbreviationsIndex IndexLimited Warranty Mow’n MachineTM Zero-Turn Mower Replacement Parts Woods Equipment Company

FZ25D specifications

The Woods Equipment FZ25D is a versatile and powerful piece of machinery designed for professional landscapers and grounds maintenance operations. This compact yet robust zero-turn mower boasts a range of features that make it ideal for tackling various mowing tasks efficiently and effectively.

One of the standout features of the FZ25D is its powerful engine. Equipped with a reliable engine, it ensures excellent performance and reliability during operation. With a horsepower rating that enhances its cutting power, the FZ25D can easily handle tough grass and uneven terrains, providing a smooth and immaculate finish to manicured lawns.

The zero-turn capability of the FZ25D is another significant advantage, allowing for unparalleled maneuverability. It features a dual-hydrostatic transmission that offers quick and responsive turns, enabling operators to navigate around obstacles, flower beds, and tight corners with ease. This capability reduces mowing time and increases productivity, making it a preferred choice for professionals.

The mower deck of the Woods Equipment FZ25D is designed for optimal cutting performance, featuring a durable construction that withstands rigorous use. Its cutting width allows for a large mowing area covered in a single pass, ensuring efficiency in operation. Additionally, the cutting height can be easily adjusted to suit various grass types and conditions, providing flexibility for different mowing scenarios.

Comfort is paramount in the design of the FZ25D. The operator station is ergonomically designed, offering a comfortable seating position with excellent visibility. The controls are intuitively placed, making it easy for operators to manage their mowing tasks without unnecessary strain. Furthermore, the mower is designed with vibration dampening technology to reduce operator fatigue, allowing for extended periods of use.

Maintenance is straightforward with the Woods Equipment FZ25D due to its easily accessible components. Users can quickly perform routine checks and necessary servicing, ensuring the mower remains in optimal working condition.

In summary, the Woods Equipment FZ25D combines power, maneuverability, and comfort, making it an excellent choice for landscaping professionals. Its advanced features, including a robust engine, zero-turn capability, durable cutting deck, and ergonomic design, cater to the demands of both commercial and residential mowing tasks, providing unmatched efficiency and performance.