Woods Equipment FZ25D manual Straight Line Travel, Install Single Tailwheel Optional

Page 28

STRAIGHT LINE TRAVEL

1.Check tire pressure; tires must have equal air pressure.

2.Check travel; drive forward with both steering handles full forward at half throttle.

If travel is not straight, adjust steering handle stop bolt on opposite side of turn.

If power unit turns to the left, raise steering stop bolt on the right.

If power unit turns to the right, raise steering stop bolt on the left.

DP4

Figure 21. Left Side Steering Stop Bolts

INSTALL SINGLE TAILWHEEL (OPTIONAL)

1.Attach tailwheel spacer (22), and pivot mount adapter (1) to rear of power unit frame using two cap screws (21) and lock nuts (20).

2.Attach pivot housing (2) to pivot mount adapter and power unit frame using four cap screws (18) and lock washers (19).

3.Torque hardware to 35 lbs-ft. NOTE: Rear tire pressure: 18 psi

1.Pivot mount adapter

2.Pivot housing

18.3/8 NC x 4-1/2 HHCS GR5

19.3/8 Lock washer

20.3/8 Lock nut

21.3/8 NC x 1-3/4 HHCS GR5

22.Tailwheel spacer

Figure 22. Single Tailwheel Installation

28 Assembly

MAN0646 (Rev. 11/5/2007)

 

 

Image 28
Contents MOW’N Machine Introduction To the DealerTable of Contents Specifications General InformationSafety Safety RulesTraining PreparationTransportation OperationMaintenance Storage Safety & Instructional Decals Replace Immediately If DamagedBe Careful Operation OperationControls and Switches Deck HEIGHT/POWER Tilt Adjustment SwitchBrake & Temperature Lights Safety Switch SystemStarting Engine Cold Weather Starting TipsStarting Mower or Attachment Stopping Mower or AttachmentSteering Handle Operation Steering Handle PositionsWeight Transfer Moving Disabled Power UnitStopping Engine Manual Fuel Shut-Off ValveOwner PRE-OPERATION Check List Owners ResponsibilityOwner Service Owner ServiceEngine Service Radiator and PrescreenLubrication Service Intervals Tailwheel MaintenanceBattery Service Hydrostatic Transmission ServiceHydraulic Transmission Change OIL & Filter Cleaning Clutch BurnishingReturn to Operation After Each UseDealer Service Dealer ServiceTroubleshooting Hydrostatic Pump Troubleshooting Engine Engine Dies when Steering Handles are EngagedHydrostatic Pump Installation Troubleshooting Deck Safety SwitchHydrostatic Pump & Belt Removal Parking Brake Adjustment PTO Belt RemovalEngine Removal Solenoid TestAlign Belt Install ClutchReassemble Components Clutch & Drive Components Reassembled Assembly AssemblyInstall Drive Tires Adjust Steering HandlesInstall Single Tailwheel Optional Straight Line TravelDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListMAN0646 Rev /5/2007 FZ25D PartsFZ25D Frame Assembly FZ25D Frame Assembly Parts List Part QTY DescriptionFZ25D Engine Assembly FZ25D Engine Assembly Parts List REF Part QTY DescriptionHydraulic Reservoir & Hoses Hydraulic Reservoir & Hoses Parts List Hydraulic DiagramPTO, Clutch & Pump Assembly PTO Clutch & Pump Assembly Parts List Seat & Hood Assembly Tailwheel Assembly Single Tailwheel Assembly Wide Stance Tailwheel AssemblyBrake Assembly Brake Assembly Parts List Tire & Wheel ChartFZ25D Wiring Diagram Kubota FZ25D Wiring Diagram Kubota Diesel Steering Assembly Counterweight Mount KIT Headlight KIT Optional Bolt Torque Chart SAE Series Torque ChartAppendix Metric SeriesBolt Size Chart AbbreviationsIndex IndexLimited Warranty Mow’n MachineTM Zero-Turn Mower Replacement Parts Woods Equipment Company

FZ25D specifications

The Woods Equipment FZ25D is a versatile and powerful piece of machinery designed for professional landscapers and grounds maintenance operations. This compact yet robust zero-turn mower boasts a range of features that make it ideal for tackling various mowing tasks efficiently and effectively.

One of the standout features of the FZ25D is its powerful engine. Equipped with a reliable engine, it ensures excellent performance and reliability during operation. With a horsepower rating that enhances its cutting power, the FZ25D can easily handle tough grass and uneven terrains, providing a smooth and immaculate finish to manicured lawns.

The zero-turn capability of the FZ25D is another significant advantage, allowing for unparalleled maneuverability. It features a dual-hydrostatic transmission that offers quick and responsive turns, enabling operators to navigate around obstacles, flower beds, and tight corners with ease. This capability reduces mowing time and increases productivity, making it a preferred choice for professionals.

The mower deck of the Woods Equipment FZ25D is designed for optimal cutting performance, featuring a durable construction that withstands rigorous use. Its cutting width allows for a large mowing area covered in a single pass, ensuring efficiency in operation. Additionally, the cutting height can be easily adjusted to suit various grass types and conditions, providing flexibility for different mowing scenarios.

Comfort is paramount in the design of the FZ25D. The operator station is ergonomically designed, offering a comfortable seating position with excellent visibility. The controls are intuitively placed, making it easy for operators to manage their mowing tasks without unnecessary strain. Furthermore, the mower is designed with vibration dampening technology to reduce operator fatigue, allowing for extended periods of use.

Maintenance is straightforward with the Woods Equipment FZ25D due to its easily accessible components. Users can quickly perform routine checks and necessary servicing, ensuring the mower remains in optimal working condition.

In summary, the Woods Equipment FZ25D combines power, maneuverability, and comfort, making it an excellent choice for landscaping professionals. Its advanced features, including a robust engine, zero-turn capability, durable cutting deck, and ergonomic design, cater to the demands of both commercial and residential mowing tasks, providing unmatched efficiency and performance.