Install Wing Wheel Yoke Adjustment Link

Install Wing Wheel Yoke Adjustment Link

CAUTION

Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy com- ponents.

1.With a lifting device raise right wing and lock in the up position using the wing lock-up bar. Leave lifting device attached for added support.

2.Attach adjustable link (8) to right side of center wheel yoke arm and secure with cap screw (28) and lock nut (33).

3.Attach opposite end of adjustable link (8) to wing wheel yoke arm and secure with cap screw (28) and lock nut (33).

4.Remove lock-up bar and carefully lower wing using lifting device.

5.Repeat process for left wing. (BW126R only has right wing installed; BW126L only has left wing installed.)

DP2

8. Adjustable link

28. 1 NC x 4-1/2 HHCS GR5

33. 1 NC Lock nut

Figure 34. Left Wing Wheel Yoke

Adjustment Link Installed

Install Wing Driveline

1.Attach clutch shield (16) to wing gearbox using four cap screws (60), lock washers (64), and flat washers (63).

2.Slide non clutch end of driveline (3) over wing gearbox shaft and align holes with groove.

3.Secure driveline to shaft using cap screws and lock nuts supplied with driveline.

4.Slide clutch end of driveline over splitter gearbox and secure using cap screws and lock nuts supplied with driveline.

5.Repeat process for left driveline. (BW126R only has right wing installed; BW126L only has left wing installed.)

3.Driveline, complete

16. Clutch shield

60. M8 x 1.25P x 20 mm HHCS

63. 5/16" Flat washer

64. 5/16" Lock washer

Figure 35. Right Driveline Installation

Install Hose Kit

1.Remove plug from rod end of each wing cylinder.

2.With the wings in the down position and cylinder extended, remove and reinstall the plugs from the base of the wing cylinders. This will trap air behind the piston and help when lowering the wings.

3.Install reducer bushing and restricter elbow into cylinders. Position elbow on center cylinder to point forward; on wing cylinders point elbows to the center.

NOTE: Make sure a breather fitting is installed in the rod end port of the wheel yoke cylinder.

4.Attach hose to each elbow.

(Rev. 10/19/2009) MAN0707 (5/30/2008)

Assembly 39

BW180-3, BW126Q-3, BW126-3, BW180Q-3 specifications

Woods Equipment Company has long been a leader in manufacturing innovative agricultural and landscape maintenance products. Among its popular offerings are the BW180-3, BW180Q-3, BW126-3, and BW126Q-3 models, which are designed to meet the needs of both professional and amateur users.

The BW180-3 is an impressive rotary cutter with a cutting width of 60 inches, making it ideal for tackling overgrown fields, pastures, and other large mowing areas. It features a rugged, all-steel construction that ensures durability and longevity, even in the toughest of conditions. The cutter is equipped with a heavy-duty gearbox, ensuring efficient power transfer while minimizing wear and tear. The innovative design of the BW180-3 also includes an adjustable tail wheel that provides stability and ease of maneuverability.

For those seeking advanced functionality, the BW180Q-3 model introduces quick-attach capabilities, allowing users to easily connect and disconnect the cutter from the tractor without the need for additional tools. This feature not only saves time but also enhances user convenience, making it an excellent choice for busy farms and landscaping operations. With a similar cutting width as the BW180-3, this model maintains the robust construction and drivetrain specifications that make Woods Equipment cutters a trusted choice.

On the smaller side, the BW126-3 offers a 48-inch cutting width, perfect for maintaining smaller fields and lawn areas. Designed with the same enduring quality, it is lightweight yet powerful enough to handle tough mowing tasks. The BW126-3 comes with a versatile hitch design that makes it compatible with a wide range of tractors.

The BW126Q-3 shares the core features of the BW126-3 but incorporates the quick-attach technology for enhanced user efficiency. This model combines flexibility with reliability and is particularly suited for operators who need to switch quickly between attachments throughout their workday.

Overall, the Woods Equipment BW180-3, BW180Q-3, BW126-3, and BW126Q-3 models provide a variety of features and technologies that make them indispensable for anyone looking to efficiently manage land. Whether you need the extra cutting width and power of the BW180 series or the nimble ease of the BW126 series, Woods Equipment offers versatile solutions for diverse agricultural and landscaping needs.